• Discussion in the Admin room about nightly images, we dont really need or want these posting for the following reasons.

    1. We all know where to get them.
    2. Never have a change log.
    3. The changes if any are not worthy of anyone upgrading there boxes on a daily basis.
    4. They clutter the forum up.

    Posts will be removed.

    Ferret

GTMedia GTCOMBO

eyelife

Registered
Messages
18
I have a problem since the TVService crash version was released, no subsequent version fixes the error. That's why I had to roll back to the early 2023 version. Does anyone have a solution for this?
Which version do you have? Write the version number. Please upload the Oscam file that is currently running
 

kegnkiwi

Staff member
Moderator
Messages
1,300
Enter IPBOX:8081 into any browser on a computer connected to the same network, i.e. the address through which the box connects to the Internet, e.g. 192.168.0.111:8081 and oscam known from Linux will open.
Have you done this on a gtmedia box? It works with E2 linux boxes when running oscam but aren't the gtmedia and other similar boxes closed source chinese boxes?
 

eyelife

Registered
Messages
18
Have you done this on a gtmedia box? It works with E2 linux boxes when running oscam but aren't the gtmedia and other similar boxes closed source chinese boxes?
I do not know the method. Please explain the method and then send the operating file
 

eyelife

Registered
Messages
18
Have you done this on a gtmedia box? It works with E2 linux boxes when running oscam but aren't the gtmedia and other similar boxes closed source chinese boxes?
Do you mean this works on gtmedia
p_3093fk7kg1.jpg
 

kegnkiwi

Staff member
Moderator
Messages
1,300
Do you mean this works on gtmedia
p_3093fk7kg1.jpg
No what i am saying is that it will not work. That picture is from a oscam or ncam server page on an enigma 2 box. If i am correct that these boxes are like the viark boxes then they are closed source chinese boxes.
 

eyelife

Registered
Messages
18
No what i am saying is that it will not work. That picture is from a oscam or ncam server page on an enigma 2 box. If i am correct that these boxes are like the viark boxes then they are closed source chinese boxes.
This picture appears to me after writing my IP address. I own a GT Media Combo 4K device
The problem here is that I want an OSCAM file to run on the device
p_3093hk7y91.jpg
 

archiesat

Donating Member
Messages
1,424
No what i am saying is that it will not work. That picture is from a oscam or ncam server page on an enigma 2 box. If i am correct that these boxes are like the viark boxes then they are closed source chinese boxes.
gt media combo box connects to pc with ip address on same network to access oscam sever files keys etc.gt combo is not like other gt media boxes with mars server .does not have forever server like viarks starsats etc. its android receiver without any servers but has auto biss.
 

kegnkiwi

Staff member
Moderator
Messages
1,300
gt media combo box connects to pc with ip address on same network to access oscam sever files keys etc.gt combo is not like other gt media boxes with mars server .does not have forever server like viarks starsats etc. its android receiver without any servers but has auto biss.
Thank you for explaining, i do not own that box so i could not be sure, maybe you can help @eyelife with his question.
 

archiesat

Donating Member
Messages
1,424
sorry i'm of no help regarding oscam i only use gt combo for auto biss and only way to access key in use is with browser on pc with same network giving keys.the gt media forum would be best place to start regarding oscam workings.
 

eyelife

Registered
Messages
18
These are Oscam files, but they do not work. These files are accepted by the device, but they must be up to date
p_3093jawdd1.jpg
 

jarekmo

Registered
Messages
14
These are Oscam files, but they do not work. These files are accepted by the device, but they must be up to date
p_3093jawdd1.jpg
do this: 1. go to oscam from the computer IP BOX:8081 in the files tab fill in oscam.server and oscam.conf according to the formula: http://gcccms.cccams.net/doc/oscam.txt then save and restart oscam. It must work as long as you have good cccam lines . tell us where you get the lines from and what satellite you receive the programs from
 
Last edited:

eyelife

Registered
Messages
18
GTMedia-GTCOMBO 4K stuck in BOOT. The answer is here

The flash device has the latest compressed software installed on it, as decompression is prohibited
 
  • Like
Reactions: 117

eyelife

Registered
Messages
18
A problem appeared in the new version GTCOMBO_v2.0_C20.A9.1.28_20240528
Error message tv service keeps stopping
Which led to downloading an old version and avoiding this problem
 

jarekmo

Registered
Messages
14
A problem appeared in the new version GTCOMBO_v2.0_C20.A9.1.28_20240528
Error message tv service keeps stopping
Which led to downloading an old version and avoiding this problem
Somehow I managed: I uploaded the version: GTCOMBO_v2.0_C20.A9.1.28_20240528, there was a problem with TV Service, then I updated the version from the pendrive with the GTCOMBO_v2.0_C20.A9.1.28_20240528 version and the problem went away. Weird but it works.
 

eyelife

Registered
Messages
18
Somehow I managed: I uploaded the version: GTCOMBO_v2.0_C20.A9.1.28_20240528, there was a problem with TV Service, then I updated the version from the pendrive with the GTCOMBO_v2.0_C20.A9.1.28_20240528 version and the problem went away. Weird but it works.
After I changed the version to the old one, I was surprised by a wonderful picture and the sound is excellent. Version GTCOMBO_v2.0_C20.A9.1.20T_20230117. There is no cracking in the picture or distortion. The colors are wonderful. The system is excellent.
 

jarekmo

Registered
Messages
14
I didn't see any difference in the image on each version, it was ok. Did you manage to use oscam? I noticed that in the latest version it did not want to surprise, restarting oscam from ipbox:8081 helped.
 
Top