Have here views an image for people who only want to look found. 8)
This image is based on the original image of 06.10.09 (for the maps is simply the best story)
It supports cards in card reader (6MHZ) such as an S02 and a few more: thumbup: (D02 / S01 / Arena .......)
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
A few scripts implicating have come to the beautiful and small pictures .....
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein. : thumbup:
So much fun with it and as I said just found ..... 8)
The level is the way:
Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 72% /
Image of 03.11.09, with S02 as well as internally 2-4 times Smargo OSCAM via external and CccamServer support
Have here views an image for people who only want to look found.
It supports cards in card reader (6MHZ) such as an S02 all over newcs 1.2 and passed on Mgcamd.
Then the OSCAM has come, this supports up to 4 Smargos (external USB card reader).
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
So much fun with it and as I said just found.
The level is the way:
Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 70%
This was achieved by deleting the two games .... play who wants to buy a game console
Under Menu / scripts implicating also a lot was added. Hard to measure temperature, liquid level display, tuner reset and so on.
The start channel is permanently set to a music station, and the drive is switched off in standby
Image of 03.11.09 HD + internal and 2 times Smargo via OSCAM newcs and one each external and CccamServer support
Have here views an image for people who only want to look found.
Will support the HD + cards in the card reader.
Then the OSCAM has come, this supports a Smargo (external USB card reader)
and the new newcs now supports Smargo's here a pre-programmed.
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
So HD + internal card reader and two external Smargo's ..... for S02 / S01 / SRG and Orf Cards and who knows what's still going.
Will support the HD + cards via the internal card reader newcs.
Your S02 will be very well read in the external Smargo via newcs.
A patched OSCAM is also included but not configured. (still too much bugi) that supports the second Smargo (external USB card reader)
As always, you can feed the cccamd.list with their own data and can then access a CccamServer. () Up to version 2.1.1 without problems
http://rapidshare.com/files/327988482/backups30.12.09.rar
[B][COLOR="Blue"]Image vom 30.12.2009 erweitert mit Newcs Mgcamd Oscam erstellt am 01.01.2010[/COLOR][/B]
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstützt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Ich weiß das das nicht der richtige Weg ist, aber mal gerade für Anfänger im Bereich Neutrino / Linux schon mal ein Anfang.
So viel spass damit und wie gesagt nur gefunden .....
Ach und für alle die die Bordsoftware nicht kennen , zum bedanken braucht man nur den Bedanken Button zu drücken und für Kretik den Antworten Button
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstützt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Aktuelle Mgcamd 1.35 und die Newcs vom 08.01.2010 (Robby hat leider noch keine neue Oscam gemacht .... schade )
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstützt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Aktuelle Mgcamd 1.35a und die Newcs vom 08.01.2010 Das aktivieren einer HD+ Karte sollte jetzt funktionieren.
Danke an mixvt
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten und konfiguriert. Diese unterstützt den Smargo (externe USB Kartenleser) mit einer HD+ Karte.
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
New Hot Tuna Img for Coolstream hd 1
beta version 1.04 rc3
emu manager inside to start/kill mgcamd & oscam
update with latest kernel before install
upload *.img into /tmp folder
and select instal by ftp on the menu
http://www.zshare.net/download/7204733327db87e4/
Coolstream image mod based on original image 25.01.2010
Release date: 03.02.2010
[B]
Changes:[/B]
* added: mgcamd 1.35a + config (emm-fix ... works with and "activates" HD+ cards)
* added: newcs
* added: oscam
[B]config is testet with:[/B]
- HD+ card in original card reader (CR)
- SRG card in alpha crypt 3.20
- ORF card in alpha crypt 3.20
- Diabolo 3.2 Underworld 1.89/Horizon 1.04
- T-rex Predator/Predasaur 3.80/2.40
* added in separate archiv-file: settings for 6 satellites via Diseq 1.1 and T90
1: 19,2°
2: 23,5°
3: 13,0°
4: 28,0°
5: 9,0°
6: 7,0°
... change settings to your needs pleaesimply update setting files via ftp in /var/tuxbox/config/zapit
So die Alphaversionen haben ein Ende gefunden ab jetzt Beta Versionen
Leider funktioniert die Oscam im Moment erst nach einen Emureset aber das wird auch noch
Mgcamd und Oscam sind voreingestellt für HD+ im internen Kartenleser und S02 im USB Leser (Smargo)
Newcs ist via /var/etc/ ---> .newcs.aus ausgeschaltet und kann durch entfernen des PunktAus eingeschaltet werden
With Link Browser Tux Com, scripts, other icons, menu images, TTX adjusted neutrino-r 80 80, channel icons, new font, themes, current neutrino ......
Preparing for hd + internally and mgcamd 1.35a (OSCAM) is missing, cccamd.list can be inserted.
Important: Please remove even the one remaining game, just have seen after the calling of the game and quit after that, there are other display errors in the main menu.(var/tuxbox/Plugins -> die beiden Dateien ltris löschen)