Search results

Hi, Ive had my DM800se clone for some years now but ran into a problem with no ca found. When I attempted to flash thru the service port I found that the usb-mini-B had come off its contacts. After reconnecting it, Windows could not recognize the device. With several tries at putting a new...

Hi, my diablo 2 with ipnosys 036 use to work well in my dm7000 but now i get pic freeze on the fta chnls. I read all the tutors on bin and key loading but still feel like i did something wrong. Any suggest to use for Nilesat 7W? Any suggest will be helpful. Thanks

Ive had my Cas3 for several years with no problems loading cams or cards up until a few days ago it started not detecting my Diablo2 and now any one of my cams I try to use. I have ohmd out the ribbon cable and it seems to be good. Is it possible that the dummy card has gone bad or something...

I read someplace that Astroox and Starsat Truman were the same. Is this true? Can someone point me to the latest firmware, software and loader needed for 68.5e. Any assist will be greatly appreciated.

Hello, I have a DM7000 and resently loaded pli jade image. Everything seemed to be working fine until today I started getting a fatal error when I try a transponder scan. "Loading network failure". Now the screen is blank under transponder edit, just with the control tabs at the bottom and no...

Is there a file for mcsa with use of my t-rex cam? or any suggestions.

My older version trex cam will except any of the 358 files but will not take the 359. My cas3 keeps saying to reinsert the dummy card and try again. Still the 358 file will load with success. Does anyone have any ideas for me on this.

Can someone please help me in managing my dm7000 var. It's sitting at 95% even after i deleted all of the key files. What could be using so much mem? Im running on gemini 3.60 and not able to a thing because the var is so full. Is there a way to go back and start off fresh? Any suggestions and...

Whenever I try to load the xml on my 7000, i get a "can't resolve hostname". What and how should I edit under var/etc to get this to work because all of the satellites that I want, do not appear in the transponder and motor setup listings so it looks like I need to edit them in some kind of way...

I just setup a c-band dish with tri-lnb's. My 7000 will recognise each input with a straight thru cable connection but not with the multi connector. Can someone help with my config setting for three c-band and one ku input? Many thanks in advance.

I've done a search on telnet settings with no luck. Im locked out of my 7000 since the process of flashing Gemini3.30 via my dcc. Now i havn't been able to get into the box by telnet/hyperT. All i get is a little garble on power up and with that i only see the "GP" logo. Can someone direct me to...