Search results

  1. D

    Problems when play recorded programs (E2)

    After reformatted in ext3/4 filesystem, problem resolved. thank you all!
  2. D

    No recovery screen during boot

    The only way to have the recovery screen back is to flash in slot 1 OpenPLi 8.3 ONLY (not 9.0, not develop build). Then you can upgrade through Flash Online to OpenPLi 9.0 without loosing recovery screen. If you flash any other team's image, recovery gets lost again. The other way is to press...
  3. D

    No recovery screen during boot

    No, I don't want to flash a recovery image, I want to enter to recovery menu. If one of the four E2 images fails for some reason, I need to enter to recovery mode to flash a backup image. If I do in your way, I loose every other image installed.
  4. D

    No recovery screen during boot

    If I do so, there is a flux of "boot, e2upd, update" messages on box's lcd, with no further action. I just want to enter to recovery mode.
  5. D

    No recovery screen during boot

    Hi. There is new problem with dual receiver. During boot, when I press several times "ok" on remote, there is no recovery screen anymore as it used to, there is only a stable "qviart" logo. Any ideas?
  6. D

    Problems when play recorded programs (E2)

    I know that ext3/4 is the primary filesystem for E2, but it's also compatible with FAT32 or NTFS. I have had many E2 receivers in the past with external HDD formatted in NTFS, there was never such a problem!
  7. D

    Problems when play recorded programs (E2)

    Hi. SSD is formatted in NTFS. With other E2 receivers there was not such a problem. I must say that the problem is more evident when I play a program and record another one simultaneously.
  8. D

    Problems when play recorded programs (E2)

    Hi. When I play recorded streams (Qviart Dual 4K, E2 image), I notice many freezes, drops, skips of the playing scenes. The problem is only during playback, not in rec mode, because recorded programs play well on PC. I use an SSD storage for recordings (same problem with HDD 2.5"). Does anybody...
  9. D

    Qviart Dual E2 Images

    Where did you find Egami 10.4 for DUAL? thanks
  10. D

    Qviart DUAL

    You have to search for SP1 Spain code, nomal SP1 is not valid for Qviart anymore.
  11. D

    Qviart Dual Strange Picture Colour Issue

    No need to do factory reset, just go on Preferences->Apps->Running, find Qviart app and clear data, it's a kind of soft reset and everything turns normal.
  12. D

    Qviart DUAL

    Hi. Is there any solution for Netflix 4K or HD?
  13. D

    Viark Forever boxes

    Do you mean the link? http://www.metamango.org/#/home
  14. D

    Qviart DUAL

    Install an alternative launcher (like Aurora) to see the 4-digit number, then reboot normally to original launcher (but for the moment there is no use of metamango with 1.06 firmware).
  15. D

    Qviart Dual Strange Picture Colour Issue

    I have the same problem. On E2, it happens with PLi images (not happens on OpenSPA or OpenATV). On Android it happens when I load a ready settings channel (p.s. from FENEKI). When I delete all the channels and scan manually, everything turns normal.
  16. D

    Channel-list+packages/bouquets-from-55East to 34.5West for-Qviart Dual-4k-UHD-BY-FENEKI

    Is it possible to make a multi-feed file, instead of a motorized one? great job, though! thanks!
  17. D

    Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide

    So, I have a problem, if anybody can help. My S/N seems invalid. What can I do?
  18. D

    Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide

    Me neither. Do you use last 1.06 firmware with original launcher? Thank you!
  19. D

    Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide

    Is it possible to put Forever IKS service on Qviart Dual? I've been told that spain receivers are not supported in these days.
  20. D

    Viark Forever boxes

    Sorry, didn't understand. I think .sdx is another database format, but is it compatible?
Top