insat 4a
hi
lnb noise should be 0.2
polarisation is " H "
elevation
http://earthstationtechnology.blogspot.be/2011/01/insat-4a-and-insat-2e-az-el-details-in.html
Frequency,Polarity Logo Name of Channel Package Mode,Video Encryption SR FEC SID V-PID NID TID Audio Lang.
11.010,......14, H Tata Sky , Fox History & Traveller VIDEOGUARD 27500 7/8 IN
11.050............................................................................................................................30000...5/6.............210..15
is it that i have to add tp first : ....................yes
and then only i'll see the signal strength?.......yes
if you do not know what to do to find your insat 4a or one of its transpondor , try this
on a working 11050 frequency where you have a signal
input 30000 + 5/6
now turn slowly the parabol to the right (only a little for 3°) and you should see the signal
tell if you were successfull
regards
nope :mecry:
i tried aligning a satellite dish today -first time in my life and its a total failure without any clue..
as i already said, i'm trying to set up a motorized installation
my location is 80.6 and so i'm trying to lock on insat4a @ 83E
at first my x403p box didn't have insat4a listed in its firmware but i added it after editing f/w dump in alieditor and putting it back into the receiver (thanks to satamuse)
now i can see this bird (insat4a) in the list and when i choose it in usals menu, motor is going where it think 83E is but signal is not going beyond 5%
i tried moving left/right directions and adjusted elevation but still no signal
is it that i have to add tp first and then only i'll see the signal strength?
pls get back
thank you