Problems DM8000HD and Card Luxe Tv

D

digit11

Registered
Messages
70
Hello,

I have purchased a Viaccess Cam and the Card of the channel Luxe TV.

I have moved the dish on the Satellite 9° East, and I have found the channel on Freq 12245 H - DVB-S2 27500-3/4 8PSK.

But unfortunately even if the signal is good (around 70%), the channel do not work well : overlapped images, green screen...

I have contact the assistance thet it told me to check that the parameters DVBS2 and 8PSK are well encoded in the receiver. (Where are ?? :confused:)

Could you help me ?

Thanks !!
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
So this is a signal issue nothing to do with the card/cam combination ?

Youll find some of the option under manual scanning

Menu-setup-service searching- manual scan. Run the scan and see if it improves your problem do not select the channel from favourites after the scan as these are not updated.

After the scan press the bouquets botton then green for sat then select the channel from the folder for 9 east.
 
D

digit11

Registered
Messages
70
Hi Ferret,
I have tried your suggestion but nothing...
This is my Tv screen on Luxe Tv Channel (Signal 69%)
:confused: :(


 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
Im not sure what that is it is possible it is the fault of the cam.

Why are you running a cam on a 8000 you can use most card in the card slot using one of the emu example CCcam, Scam.
 
D

digit11

Registered
Messages
70
The cam was sold in combining to the card.
I will try with cccam, but for example I receive the Swiss channels without problems with another Cam Viaccess.
The Luxe TV Assistance has confirmed me to check that the parameters DVBS2 and 8PSK are well encoded in the receiver...
What do you think intends ?
Is there another configuration to setup in the DM8000 ? :confused:
Thanks !
 
D

digit11

Registered
Messages
70
Hi kiliantv,
Could you tell me what image do you have on DM8000 and what version of cccam and scam you are using ?
Thanks !
 
D

digit11

Registered
Messages
70
Sorry I disturb you again...
In the first slot of my dreambox I have the Cplus card and works with scam.
If I insert the Luxe Tv card on the second slot, I must to setup a new configuration in the folder of the dreambox (etc/tuxbox/config)- oscam.conf - oscam.server - oscam.user ?

[reader]
label =
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 357
caid = 0500
ident =
aeskeys =
group = 1
dropbadcws = 1

..........

Thanks !!
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
You need second sci address like

device = /dev/sci1
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
No need for private message youll get more help in this thread, i never mentioned Oscam working with your card ive no experiance of that card with oscam but as confirmed it does work with CCcam and Scam.
 
D

digit11

Registered
Messages
70
Then I have only to add this line :
device = /dev/sci1
Could you tell me the folder where to add this line ?
Thanks and sorry for my inexperience...
:thum:
 
D

digit11

Registered
Messages
70
I must to write in the Config of the oscam.server this line ?

[reader]
label = LuxeTv
protocol = internal
device = /dev/sci1

Chip card up or down ?
 
Last edited:
D

digit11

Registered
Messages
70
Nothing ...:mad:
Cam viaccess, cccam 2.3 or scam 3.60 the screen is always this (overlapped image, screen black, green ..)



Please help me !
Write me your configuration, resolution ...

Thanks
 
D

digit11

Registered
Messages
70
Hello,
My luxe tv card works well in the slot card with cccam 2.3.0 but NOT works in the slot cam, in the original Cam Viaccess.
Do you have experiences?
Thanks for suggestion..
 
You must log in or register to reply here.
Top