Thanks mate, can you tell where to find those images, and also what tools do I need to use to flash the image? Thanks, ciao.
P.S. by the way the image was on the box, you're right, ciao.
Latest images are here, is your box the 600 or 600 super
Standard 600 image
http://www.sat-universe.com/showpost.php?p=638597&postcount=34
Super image
http://www.sat-universe.com/showpost.php?p=638626&postcount=35
Please make sure you use correct image
Id flash it with TCC and a null modem
TCC
http://www.sat-universe.com/showpost.php?p=440741&postcount=2
1. Down load the image.
And flash that image to your TM like this
2. Open TM control center .
3. Start TMCC with the TechnomateCenter.exe
4. Click on the serial tab.
5. Top option set the comport to the one you have your null modem cable connected to usually com1.
6. Now click the file button and select the unrared image you downloaded earlier.
7. Now in front of your TV switch the power OFF on your TM.
8. Press in and hold the UP ^ button and then turn the power back on youll see a setup screen in front of you.
9. Press the up button for serial update then the right > button and then the ok button. This will start the image upload. Wait till it confirms the process is done.
10. Now turn off the power leave it for a min and then turn it back on.
Ferret