Information pasted on the site you indicated above. Image OpenATV 6.3
After paste the log and submit, Please send link like this:
_https://paste.fedoraproject.org/paste/EE9OZUu~c5tf2iIyD3kHig
Sorry for the confusion. See the link below. I hope i did it right.
_https://paste.fedoraproject.org/paste/new?fork=rzbSMZyqwTqZNls0RxmSbQ_
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
Due to the lack of space in flash,is it enough to copy
BissFeed Autokey folder to usb or is required to install again
.ipk file.
Thank you.
ohhh! my god! Do you read the Red sentence? Please set ip:127.0.0.1 or local ip add as webif setting in config file.
"Please set IPORT to webif setting in emulator config file(like oscam.conf)"
oscam.conf:
_https://paste.fedoraproject.org/paste/mU39m829J2dSyA71Utitkg
Code:[webif] httpport = 8888 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = [B][COLOR="Blue"]127.0.0.1,[/COLOR][/B]10.1.0.0-10.1.255.255
Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?Thanks for your reply, but I already have 127.0.0.1 listed on my oscam.conf. Could it be that the port is somehow blocked?
Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?
For me the plugin crashed when trying to open on a non-feed but soon as I scanned the feed it run fine. Not a problem as should never be running anyway on non feed.
Keep up the great work!!
@momi133 I can't get any cw after update to 2.0 :/ but no crashes
NO COMMENT INFO
CW: Internet Conection
host port set to 127.0.0.1 8888
I have webif user/pass set but earlier worked that so I doubt it's issue.
Any tips?
Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?
All feeds that is reported in Sat Universe ! and a few number of tv channels like ESPN Caribbean(30w )and BBC(27W)
Thanks but internet connection is good, if I reinstall V1.5 it's working.Your problem is Internet Conection error! please check Internet Conection of box.
root@dm520:~# ping linuxsat-support.com
PING linuxsat-support.com (104.31.71.118): 56 data bytes
64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms
64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms
64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms
Thanks but internet connection is good, if I reinstall V1.5 it's working.
I checked also:
I can check port via telnet but don't know which one.Code:root@dm520:~# ping linuxsat-support.com PING linuxsat-support.com (104.31.71.118): 56 data bytes 64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms 64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms 64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms
Thanks but internet connection is good, if I reinstall V1.5 it's working.
I checked also:
I can check port via telnet but don't know which one.Code:root@dm520:~# ping linuxsat-support.com PING linuxsat-support.com (104.31.71.118): 56 data bytes 64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms 64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms 64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms
Same as me with Dm900. No problem at all with old 1.5 version
ok, it's enough copy new version folder to extension folder.
55.5Wwhen plugin doesn't get #cw, please report feed freq or sat-uni post in this topic!
thanks a lot