Method of Opening PowerVu Channels in Enigma2 Using Oscam

satmafia · Aug 2, 2015

2015/08/02 10:23:46 2C3BB583 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1772 PROVID: 000000
2015/08/02 10:23:46 2C3BB583 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2015/08/02 10:23:46 2C3BB583 c (dvbapi) Demuxer 0 serving srvid 0002 (0E00@000000:0002 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 138A
2015/08/02 10:23:46 2C3BB583 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2015/08/02 10:23:46 2C3BB583 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 ecmpid 0 CAID: 0E00 ECM_PID: 1771 PROVID: 000000
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 found 1 ECMpids and 9 STREAMpids in PMT
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 serving srvid 0001 (0E00@000000:0001 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 1389
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1389 VPID 0488
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 continue decoding of SRVID 0002
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1772 PROVID: 000000
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 serving srvid 0002 (0E00@000000:0002 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 138A
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 found channel in cache and matching prio -> start descrambling ecmpid 0
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1389 VPID 0488
2015/08/02 10:23:47 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0001/40:AC32D45D7B19989036DCB153919EAB28): found (20 ms) by EMU
2015/08/02 10:23:47 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0002/40:69819E220B5F990F319694A2B8E11B4B): found (56 ms) by EMU
2015/08/02 10:23:47 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0001/40:97245EB6C47630DD9A122EF67A6EA6C5): found (24 ms) by EMU
2015/08/02 10:23:47 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0002/40:136CC525CAC618D91CEA41633FBC2286): found (57 ms) by EMU
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 continue decoding of SRVID 0002
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1772 PROVID: 000000
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2015/08/02 10:23:47 2C3BB583 c (dvbapi) Demuxer 0 serving srvid 0002 (0E00@000000:0002 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 138A
2015/08/02 10:23:48 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0002/40:311E8F4ED884A2595DF7E59C87FC5C57): found (11 ms) by EMU
2015/08/02 10:23:49 2C3BB583 c (ecm) DVBApi (0E00@000000/0000/0002/40:C2CACD91A702B86FE3F91A4BFF3A9378): found (20 ms) by EMU

Using a build of oscam with emu compiled by me and already available keys.

edyy96 · Aug 3, 2015

cupof said:
follow up to my post 322 above
ie: powervu working with solo2 clone with old drivers
driver dated december 2013

pmt_mode = 6
now works

detect = cd
is not needed just delete or hash out

using satmafia oscam-emu binary
here
http://www.sat-universe.com/showpost.php?p=1259450&postcount=282

It does not work, solo2 mini, OpenPLi 4.0 (01/08/15) For Lonrison v4 flashed image, the way in which failed because I can not do this

cupof · Aug 3, 2015

works for me on older OpenPLi 4.0 17/02/2014
driver dated december 2013

i will download OpenPLi 4.0 (01/08/15)
and try

cupof · Aug 3, 2015

@edyy96
OpenPLi 4.0 Lonrison v4 (01/08/15)
i have powervu working with it but
this image gives problems

example while on afn movies 9 east
have to keep switching
to a free to air channel
then you will get no free tuner (which is normal)
then switch to another free to air channel
now get a signal

then on the remote
push < 3 times till you back to get afn movies
keep doing that till it clears

also had to write box ip for channel to clear instead of 127.0.0.1

Code:

#SERVICE 1:0:1:A:B:16:21:0:0:0:http%3a//192.168.1.5%3a17999/1%3a0%3a1%3aA%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Movie
#DESCRIPTION Movie

also in
/etc/host
line 2
192.168.1.5

edyy96 · Aug 4, 2015

cupof said:
@edyy96
OpenPLi 4.0 Lonrison v4 (01/08/15)
i have powervu working with it but
this image gives problems

example while on afn movies 9 east
have to keep switching
to a free to air channel
then you will get no free tuner (which is normal)
then switch to another free to air channel
now get a signal

then on the remote
push < 3 times till you back to get afn movies
keep doing that till it clears

also had to write box ip for channel to clear instead of 127.0.0.1

Code:

#SERVICE 1:0:1:A:B:16:21:0:0:0:http%3a//192.168.1.5%3a17999/1%3a0%3a1%3aA%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Movie #DESCRIPTION Movie

also in
/etc/host
line 2
192.168.1.5

using what image ?

cupof · Aug 4, 2015

doh

the image i wrote in the post

read it

dydyer · Aug 4, 2015

Hello and thank you friends for this post, it works well, for cons to add new keys, it's a hassle, I do not know how it's done, for example to fight network at 15 ° west .....

taree · Aug 5, 2015

i tried different images on my dm800se bl84d to watch power vu but no success yet for me.
can any body here upload backup for dm800se clone with all powervu settings instaled plz

aliraza63 · Aug 5, 2015

I have tested VuSolo2 and Ultimo with Latest Open Pli and OpenAtv its working fine with both . But in Dm 800SE its working only with Open Pli 4. (Gjstroom daily build)
I think u should use updated oscam modified version(available in previous posts).

cupof said:
doh

the image i wrote in the post

read it

dydyer · Aug 5, 2015

Hello everyone,
I installed the method Satmafia, but I only opens 4 channels on AFN and that's all with DM800HD, thank you for your help friends

boyet05 · Aug 5, 2015

My DM800SE genuine with Dreamelite image and powervu channels tru stream relay of oscam_patch 10936

TLC_HD

edyy96 · Aug 5, 2015

aliraza63 said:
I have tested VuSolo2 and Ultimo with Latest Open Pli and OpenAtv its working fine with both . But in Dm 800SE its working only with Open Pli 4. (Gjstroom daily build)
I think u should use updated oscam modified version(available in previous posts).

VU+ Solo2 mini (clone) not working, not open channels

dydyer · Aug 5, 2015

OK I understand, I added chains, fight network, CN 3 on astra 4.8 is, I get it the system, though not very easy and a bit long to install, but it's all good. ... thank you all for the explanations ....

DM9004K · Aug 5, 2015

boyet05 said:
My DM800SE genuine with Dreamelite image and powervu channels tru stream relay of oscam_patch 10936

TLC_HD

plz send me ur backup i m also using dm800se genuine box

dydyer · Aug 5, 2015

I have an openpli 4 image on my DM800HD and after many hours, all channels are ok, 9°; 4.8°, 13° and 0.8 west...just a little bit of problems of pixels....

cupof · Aug 5, 2015

@satmafia

satmafia said:
I've fixed the rejected part in config.sh manually.

im getting
Hunk #4 FAILED at 344.
1 out of 5 hunks FAILED -- saving rejects to file config.sh.rej

what did you fix in config.sh manually

to bypass this

can you tell me what to edit in config.sh

thanks

boyet05 · Aug 6, 2015

lonezahoor said:
plz send me ur backup i m also using dm800se genuine box

This is not possible if you are in different region/location as mine because of channel list differ. you have to make your own channel list for stream which is the hard part. go to the first post and all config are available there. you also have to follow the way how to make your channel list for restream. I am willing to help and I have helped others by TV to set their channel list example.

BTW my location is in the Philippine Island and I cover 64 east to 172 east.

taree · Aug 6, 2015

boyet05 said:
. I am willing to help and I have helped others by TV to set their channel list example.

BTW my location is in the Philippine Island and I cover 64 east to 172 east.

i think u r receiving 105 east cband..also measat 91.5 and apstar cband.
plz share ur backup with any of these sats..then it will be possible for us to go further..

boyet05 · Aug 6, 2015

Check your PM @taree

Sent from my SM-J100ML using Tapatalk

satmafia · Aug 6, 2015

cupof said:
@satmafia

im getting
Hunk #4 FAILED at 344.
1 out of 5 hunks FAILED -- saving rejects to file config.sh.rej

what did you fix in config.sh manually

to bypass this

can you tell me what to edit in config.sh

thanks

No problems. Here is how my config.sh.rej looked:

Code:

-       enabled_any READER_DRE MODULE_SCAM && echo "CONFIG_LIB_DES=y" || echo "# CONFIG_LIB_DES=n"                                                                                                                                           
-       enabled_any MODULE_CCCAM READER_NAGRA READER_SECA && echo "CONFIG_LIB_IDEA=y" || echo "# CONFIG_LIB_IDEA=n"                                                                                                                          
-       not_have_flag USE_LIBCRYPTO && enabled_any READER_CONAX READER_CRYPTOWORKS READER_NAGRA && echo "CONFIG_LIB_BIGNUM=y" || echo "# CONFIG_LIB_BIGNUM=n"                                                                                
+       enabled_any READER_DRE MODULE_SCAM WITH_EMU && echo "CONFIG_LIB_DES=y" || echo "# CONFIG_LIB_DES=n"                                                                                                                                  
+       enabled_any MODULE_CCCAM READER_NAGRA READER_SECA WITH_EMU && echo "CONFIG_LIB_IDEA=y" || echo "# CONFIG_LIB_IDEA=n"
+       not_have_flag USE_LIBCRYPTO && enabled_any READER_CONAX READER_CRYPTOWORKS READER_NAGRA WITH_EMU && echo "CONFIG_LIB_BIGNUM=y" || echo "# CONFIG_LIB_BIGNUM=n"

And here is how config.sh looks after fixing it:

Code:

enabled_any READER_DRE MODULE_SCAM READER_VIACCESS WITH_EMU && echo "CONFIG_LIB_DES=y" || echo "# CONFIG_LIB_DES=n"
enabled_any MODULE_CCCAM READER_NAGRA READER_SECA WITH_EMU && echo "CONFIG_LIB_IDEA=y" || echo "# CONFIG_LIB_IDEA=n"
not_have_flag USE_LIBCRYPTO && enabled_any READER_CONAX READER_CRYPTOWORKS READER_NAGRA WITH_EMU && echo "CONFIG_LIB_BIGNUM=y" || echo "# CONFIG_LIB_BIGNUM=n"

Method of Opening PowerVu Channels in Enigma2 Using Oscam

satmafia

Registered

edyy96

cupof

Registered

cupof

Registered

edyy96

cupof

Registered

dydyer

Banned

taree

Registered

aliraza63

Registered

dydyer

Banned

boyet05

Registered

edyy96

dydyer

Banned

DM9004K

Registered

dydyer

Banned

cupof

Registered

boyet05

Registered

taree

Registered

boyet05

Registered

satmafia

Registered