Method of Opening PowerVu Channels in Enigma2 Using Oscam

You don't need a single softcam running on your receiver if you use OSEmu on a PC. I just tested it - no softcam active and the receiver still opens channels. I rebooted to make sure and it still keeps opening PW channels. It seems OSEmu does all the work instead of the receiver - pulls the video stream from the receiver, decrypts it and streams it back.

what about the traffic on data ?

It's local LAN so traffic is not an issue for me.

I can confirm that bwtv-11054-HB is working on VU+ SOLO 2 and OPENPLi 4

However it didn't work until I disabled "Include ECM in http streams"

binsultan said:

I can confirm that bwtv-11054-HB is working on VU+ SOLO 2 and OPENPLi 4

However it didn't work until I disabled "Include ECM in http streams"

Click to expand...

is this on a clone or original solo2

thanks

cupof said:

is this on a clone or original solo2

thanks

Click to expand...

Original.

Hi guys!!!Just a curiosity...In the future it will be possible to open powerVu channels through the EMU?(oscam)With other boxes(not linux)...it's possible!Why with oscam not is possible?THX in advance!!!

i have powervu working on a solo2 clone with very old drivers

so it wotks on clones

but it glitches

needs a tweek

please guys i want know what's (ident) for powervu ( group channel's )

Mahmoud1992 said:

please guys i want know what's (ident) for powervu ( group channel's )

Click to expand...

in oscam.sever

i have this

is that what your looking for

kalehrl said:

You don't need a single softcam running on your receiver if you use OSEmu on a PC. I just tested it - no softcam active and the receiver still opens channels. I rebooted to make sure and it still keeps opening PW channels. It seems OSEmu does all the work instead of the receiver - pulls the video stream from the receiver, decrypts it and streams it back.

Click to expand...

I dont have a linux pc, but a rasperry pi. Do you know if there is any os-emu/oscam-ymod with power vu support available for raspberry pi ?

What's wrong? See the log!

**** OSCam << cardserver log switched at Sun Jul 26 20:18:30 2015
-------------------------------------------------------------------------------
2015/07/26 20:18:30 7A1A3F20 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 186E ANY CHID PMTPID 1486 VPID 0AFA
2015/07/26 20:18:30 00000000 **** OSCam << cardserver log switched, version 1.20-unstable_svn, build r10888 (mipsel-newnigma2-linux-gnu)
2015/07/26 20:18:30 1BE80C2D r [Emu] Key not found: P FE0 01
2015/07/26 20:18:30 1BE80C2D r [Emu] ECM failed: ECM not supported
2015/07/26 20:18:30 7A1A3F20 c (ecm) localuser (0E00@000000/0000/00FE/40:7BCC2A357981984889A804AC4CF057F6): not found (9 ms) by emulator
2015/07/26 20:18:31 7A1A3F20 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2015/07/26 20:18:31 7A1A3F20 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 186E ANY CHID PMTPID 1486 VPID 0AFA
2015/07/26 20:18:31 1BE80C2D r [Emu] Key not found: P FE0 01
2015/07/26 20:18:31 1BE80C2D r [Emu] ECM failed: ECM not supported
2015/07/26 20:18:31 7A1A3F20 c (ecm) localuser (0E00@000000/0000/00FE/40:01448A3BB1178382DCEAF5F2B8D4B0BB): not found (7 ms) by emulator

att
hoffmann

As the log clearly reads:
your key is missing.
Find the correct key and enter it in your softcam.key in this format:

abrasat said:

I dont have a linux pc, but a rasperry pi. Do you know if there is any os-emu/oscam-ymod with power vu support available for raspberry pi ?

Click to expand...

Do you have any USB dvb-s2 tuners connected to your raspi?
If not, then you'll need to compile OSEmu with the IP of your receiver so OSEmu knows where to find satellite stream.
I may be able to compile OSEmu for raspi but I need to know the local IP of your receiver.

Oscam 1.20 10896 emu Support ecm stream relay

ooOO_SORGOS_OOoo said:

Oscam 1.20 10896 emu Support ecm stream relay

Click to expand...

This works with oscam_ymod18.56 in OpenAtv?

ffjoao said:

This works with oscam_ymod18.56 in OpenAtv?

Click to expand...

This is not oscamymod, it is normal oscam and Support emu and keys, encrypt system viaccess, SECA, NAGRAVISION, cryptworks,irdeto, biss, powervu and dre crypt. I did test viaccess OK cryptworks OK irdeto OK biss OK, POWERVU OK NAGRAVISION key not public, SECA not public i dont try dre crypt 36 e tricolor i Will try this night, i hope open it

E! 9E decrypted but no picture

P E380 00 704FEECEA3B8EC ; E! EEUR HD 9.0°E 12092-H-27500

2015/07/26 22:53:39 00000000 [Emu] stream client connected with request /1:0:19:474:1AF4:9E:5A0000:0:0:0:
2015/07/26 22:53:40 509B23BE c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 0739 PROVID: 000000
2015/07/26 22:53:40 509B23BE c (dvbapi) Demuxer 0 found 1 ECMpids and 30 STREAMpids in PMT
2015/07/26 22:53:40 509B23BE c (dvbapi) Demuxer 0 serving srvid 0474 (0E00@000000:0474 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0108
2015/07/26 22:53:40 509B23BE c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2015/07/26 22:53:40 509B23BE c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 0739 ANY CHID PMTPID 0108 VPID 0709
2015/07/26 22:53:40 509B23BE c (ecm) anonymous (0E00@000000/0000/0474/40:5D71F7F6096E575E12293DFCAA5F9E07): found (13 ms) by emulator
2015/07/26 22:53:41 509B23BE c (ecm) anonymous (0E00@000000/0000/0474/40:B1CE52A86A82DFC6EDFAD73EC84A5BB0): found (10 ms) by emulator
2015/07/26 22:53:42 509B23BE c (ecm) anonymous (0E00@000000/0000/0474/40:318B327A2E224B95441F7E03B79C40C2): found (12 ms) by emulator
2015/07/26 22:53:42 509B23BE c (ecm) anonymous (0E00@000000/0000/0474/40:06AEC2C9770060D1B3177A640275A0DE): found (11 ms) by emulator

Rqaoud you must set dvbapi and restart oscam i think it must work ;-)