hustler hd and redlight hd- hotbird
- Thread starter balaurul
- Start date
hullow sir, does it work with the same HD receiver or the receiver should be changed.
If your receiver is HD model u must edit old tp and scan then it works, but if your receiver is old SD model u must change the receiver mate.
supermario
Registered
- Messages
- 71
Hi Guys
I am in the Middle-East (Kuwait) and I tried to do manual tuning but could not get the frequency 11662 DVB-S2
27500 V 8PSK 7/8 on my VU+Duo
Has any one succeeded in getting these HD channels in this area?
Tks
I am in the Middle-East (Kuwait) and I tried to do manual tuning but could not get the frequency 11662 DVB-S2
27500 V 8PSK 7/8 on my VU+Duo
Has any one succeeded in getting these HD channels in this area?
Tks
Thanks it worked.
delete the TP and put it manually again and search. No need to appear DVB S2 etc.
supermario
Registered
- Messages
- 71
Hi m8 Dirojay
Tks for your reply. Sorry for the dummy question - How do I delete the TP. Can you please explain how to?
TP means the frequency 11662, TP 158. How do I find the 158?
Setup - service searching - Manual scan:-
Single Transponder
DVB-S2
Satellite - Eutelsat hotbird 13A/13B/13C(13E)
FREQ 11662
Inversion : Auto,
Symbol rate: 27500
Pol: Vertical
FEC : Tried with 3/4 and 7/8
Modulation : 8PSK
Roll-off : 0.35
Pilot: Auto
Network Scan : no
Clear Before scan: no
Only free scan : no
No channels found. :mecry:
Last edited:
Take a look guys, I have also the same problem !
Hi again,
Please check these photos, why it still not working with HD ?
DVB-S2
If you load your channel info in to an editing program like dreambox edit you channel info
in dreambox edit
select channel hustler hd or redlight hd
right click to edit transponder data
alter dvb-s to dvb-s2 from drop down and change FEC from 3/4 to 7/8
ftp channel list back to box
restart and all should be ok
hope this helps worked for me on vu solo
in dreambox edit
select channel hustler hd or redlight hd
right click to edit transponder data
alter dvb-s to dvb-s2 from drop down and change FEC from 3/4 to 7/8
ftp channel list back to box
restart and all should be ok
hope this helps worked for me on vu solo
supermario
Registered
- Messages
- 71
supermario
Registered
- Messages
- 71
Hi guys
Problem with new Frequency 11662 V for Hustler HD & RL HD
I tried to check with Sat finder on my VU+duo box using BH 2.0.5 image. I can see the signal fluctuating from 24 to 50 or 60 = jumping up and down, not stable and not locking.
Please can someone advise me how to fix this problem by DIY.
All other channels are working fine.
Tks for your comments/help.
B/Rgds
Problem with new Frequency 11662 V for Hustler HD & RL HD
I tried to check with Sat finder on my VU+duo box using BH 2.0.5 image. I can see the signal fluctuating from 24 to 50 or 60 = jumping up and down, not stable and not locking.
Please can someone advise me how to fix this problem by DIY.
All other channels are working fine.
Tks for your comments/help.
B/Rgds