C-band Crazy Project - Home Made

mrhardylima
21-07-2015, 16:57
Hello All, Im doing a nice project of turning Ku-Band dish on C-Band dish without destoying it!

Material: Aluminium Paper - 5 rolls (chinese shop)
Paper Box - 9 Boxes will be needed
Roll of Glue - 3 Rolls Needed
Aluminium Wire - 2 Rolls

Procedure:

1 - You will need to know the size of your dish, for exemple, you have 1,80m like me, and you want 2,20cm dish. Go to the top of the paper box were it curves and closes the box, cut it till you get 4 parts. Cut 40cm of the box from the bottom.

2 - Get the wire, without cut it you will need to get all connected to all parts around the dish. Paste 2 parts with the wire between them.

3 - Alluminium paper, cover all of it with the aluminium paper and close it well with the roll of glue to make sure with wind and rain it dont get destroyed!

Note: The Alluminium Wire will ensure that all stays together!

4 - Once all the parts are made and well fixed, fit in your dish, here you have two options:

A: Do little holes in the curve on the top of your dish and use the wire.
B: Use much glue from the roll and ensure all is well fixed!

LNB:

As you know your dish will not recognise your new extentions in his state. The arm is only getting power for 1.8m dish.
I am using a poll with will extend half of the size you increase.

THIS IS IMPORTANT STEP: If you increase 40cm, you will need the half of size on the poll. 40-20 = 20cm

1 - Do a hole on the top of the poll and fix your Cband holder.
2 - Fit your LNB.
3 - Point the dish and fix the signal

If you made all correct you should get the boost of 20/35% on Cband channels and feeds.

saayacoolu
21-07-2015, 22:16
if u can give us pictures of how that is done will be appreciated thanks for that update

mrhardylima
21-07-2015, 22:23
I will make a video doing on of the extentions and how to insert on the dish

saayacoolu
22-07-2015, 22:07
that will be most welcome m8
peace

natedogg20050
23-07-2015, 20:47
can't wait for the video from the roof

mrhardylima
24-07-2015, 01:02
With Extentions mounted my 1.8m was extended to 2.20m (40cm), with it i was able to lock 26E Badr with 71% Cband

planko
24-07-2015, 02:49
Pls give us some pics and video :thum:

natedogg20050
24-07-2015, 22:52
Yep Give us some Videos Pictures and more

mrhardylima
28-07-2015, 23:36
My LNB http://imgur.com/NCGH7BH,FzoMu5m#1

nicol-one
30-07-2015, 16:38
where are the photos of the boxes, disk and reception report?

mrhardylima
30-07-2015, 16:42
There are not pictures at moment
You can use any paper box from deliveries, and what disk and reception? u mean screenshot of signals? i cant give them because i use a satlink machine.

nicol-one
01-08-2015, 00:20
you can at least make a drawing on the procedure?
how to use the boxes, how to fix them?
without anything that helps, your idea seems just an idea

ricard silveira
02-08-2015, 12:10
Famaval dish with 1.25m and extensions with 600mm=2.4m or

Dish 1.25m with extensions 1m = Dish 3.25m C band
Lnb C band with feed not scalar conical 17k

marval450
02-08-2015, 12:41
Check this -:)
https://www.youtube.com/watch?v=ZNb0znUbK1I

capsmvp
05-08-2015, 11:23
That is really cool. At that size though it will likely only get the super strong c band transmissions.

diterpap
09-08-2015, 18:33
I like this .For feeds in band ku 7e.10e and some low signal like stan sport 68.2e will be ok to add like this?https://www.youtube.com/watch?v=ZNb0znUbK1I.I have the material and I would like your opinion to do it or not.My dish gibertini 1.25m. THANK YOU.

natedogg20050
16-08-2015, 13:12
Push

Gullnaz86
20-08-2015, 06:33
Very good job

ooOO_SORGOS_OOoo
13-11-2016, 01:22
what is it mean?

Gvn
05-12-2016, 10:13
Any photos?

Rafadhoc
24-01-2017, 03:20
Photos?

qasimsfpl
31-01-2017, 14:07
what my dear

ooOO_SORGOS_OOoo
10-06-2017, 21:46
mrhardylima's c band lnb !!!

ghaffarjaan
11-08-2017, 16:49
nice topic

YOUCEFDARK
09-01-2019, 06:05
Any photo

Lv83thai
12-01-2019, 02:51
mrhardylima's c band lnb !!!

very good :D:D:D:D

Lv83thai
12-01-2019, 02:55
Check this -:)
https://www.youtube.com/watch?v=ZNb0znUbK1I
very good job :):):)

piotro
30-01-2019, 00:42
https://i.imgur.com/M3oTIj8.jpg?1
https://i.imgur.com/L5H7RDp.jpg?1
Home made C-Band Feedhorn for offset dish. Test tomorrow :D

kugujen
31-01-2019, 13:05
[img]...

Any news? We're still waiting to know how that thing works :rolleyes:

piotro
31-01-2019, 19:20
Any news? We're still waiting to know how that thing works :rolleyes:

Not working at all :( signal is the same with and without this feedhorn. Someone have a different project/idea for working C-Band feedhorn?

gap30
31-01-2019, 19:40
Not working at all :( signal is the same with and without this feedhorn. Someone have a different project/idea for working C-Band feedhorn?

https://www.aliexpress.com/item/Hot-Sales-Conical-Scalar-ring-with-C-Band-LNB-Holder-bracket-65MM-diameter/32846056166.html?spm=2114.search0104.3.263.2ce02bb5PrEDmN&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_10130_ 10547_319_317_10548_10696_10192_10190_453_10084_454_10083_43 3_10618_431_10307_10820_10301_10821_10303_537_536_10902_1005 9_10884_10887_321_322_10103,searchweb201603_51,ppcSwitch_0&algo_expid=0898f372-f8d5-4701-a2b7-73d6378a8702-43&algo_pvid=0898f372-f8d5-4701-a2b7-73d6378a8702&transAbTest=ae803_4

max1961
31-01-2019, 19:47
hahahahaha what is all of this...look the best lnb in the world q-band and c band together http://prntscr.com/mevboe

alli1000
09-02-2019, 20:08
Liked you special feedhorn
What is minimum diameter for a C band dish?

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum