Enigma2 0.5.5 night build_backup_29.09.09

juli13 · Aug 29, 2009

Enigma2 0.5.5 night build_backup_29.08.2009

FOR 9000 - 900 - 910 / USB ONLY

Welcome to the last backup .......

Given the questions that have been reported by users, I decided to make this last backup tested by me personally and fully functioning both as regards the multi cardreader both incubus version ...

Features:

based on Enigma2 night build 0.5.5
EMU Manager + ACT extras vers 1.5 (start newcs + mbox for using the card reader (already default config settings) for the incubus use the config for the version you want to use)
settings vhannibal of 28/08/2009
cross epg 0.3.2 (set to save data on hard disk - if you do not have: Menu -> Configuration ---> crossepg)
programs for rehabilitation within
guide for the restoration of Margen64 inside.

NB Given the problems described above by many about the long startup times for 910, was set to ONE CardReader also for 9000, then use the slot below ....

If you want to enable the feature also of the top slot, we must make the following changes:

var / keys / cwshare.cfg

open with a text editor or via ftp with the usual programs used to connect to ftp dec ....

Code:

C: { 127.0.0.1 10000 dummy dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0500f430:05023800;05003800:05023800 }
#C: { 127.0.0.1 10001 dummy dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0500f430:05023800;05003800:05023800 }

togliere il cancelletto dalla seconda linea C: ( salvare le modifiche )

var/keys/newcs.xml

aprite con un editor di testo o via ftp con i soliti programmi utilizzati per il collegamento al dec via ftp....

<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>upper</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

add the part in red exactly in this position .....

Restart the receiver and have fun .

THX THESEVEN

DOWNLOAD BACK UP 33 MB

Code:

http://www.megaupload.com/?d=24SINT9Y

Enigma2 0.5.5 night build_backup_29.09.09

juli13