Discussion about MyTheatre

J

jAmMeRs

Registered
Messages
806
Vista support release. Several problems with Windows Vista
has been fixed. Added Microsoft MPEG2 Audio/video decoders included
in vista. Support for broadlogic cards has been removed...
 
J

jAmMeRs

Registered
Messages
806
Mytheatre 3.38 Full and Lite

- MyTheatre v3.38
- Added support for Genpix and DVBTech 8PSK boards.
For proper transponder settings please contact Genpix and DVBTech
respectively.
- BroadLogic cards now supported again.
- Added DishPro LNB support. (Choose "DishPro" in LOFSW field of
satellite and correct DishPro LOF1/2 settings)
- some minor fixes.
 
B

bendooly

Registered
Messages
1
I have downloaded MyTheatre.v4.00.beta-2. When I install it I get the messsage Auto Error:can't connect SrcFilter:Intervideo Audio Decoder to DstFilter:Default Direct Sound Device.
I have tried loading the graphs from working v3.38.2 and using m-peg2_decoders v.2.02 without any success. If you have v4 working I would sure appreciate it if you would zip v.4 and email to me. [email protected]

Thanks
 
Last edited:
M

marokino08

Super VIP
Messages
7,462
MyTheatre 4.00 Beta3

Code: 
  MyTheatre 4.00 Beta3 


*   Fixed problem with Twinhan cards.
    * More improvements in H264 stream handling.
    * CSA is not a part of MyTheatre now. You have to use FFDeCSA if need. Please note, MyTheatre is NOT compatible with MMX version of FFDeCSA (due to nature of MMX). Please use FFDecsa_32_INT.dll which is almost as fast as MMX version. Put FFDecsa_32_INT.dll into Plugins folder. (Rename FFDecsa_32_INT.mdl (in vplug\CSA folder) to FFDecsa_32_INT.dll or download original ALTX's FFDecsa Files)
    * TimeShift has 2 modes now. Always On/On by Pause. You can switch it in Settings->TimeShift.
    * Some other bugs fixed and improvements in playback and live view modes.

    * Twinhan kartlardaki problem düzeltildi..
    * H264 akım işlemleri için dafa fazla geliştirmeler..
    * CSA artık MyTheatre ın bir parçası değil..Gerekliyse FFDeCSA yı kullanmalısınız..Dipnot: Mytheatre FFDeCSA nın MMX versiyonuna uyumlu değil..(MMX in doğasından dolayı) MMX versiyonu gibi hemen hemen hızlı olan FFDecsa_32_INT.dll yi kullanın..FFDecsa_32_INT.dll yi plugins klasörü içine koyun..(Bunun için FFDecsa_32_INT.mdl (vplug\CSA klasörü içinde) nin uzantısını FFDecsa_32_INT.dll olarak değiştirin veya orjinal ALTX nin FFDecsa dosyasını indirin)
    * TimeShift şimdi 2 moda sahip..Devamlı On/On by Pause..Settings->TimeShift den değiştirebilirsiniz..
    * Diğer bazı hata düzeltmeleri, oynatma ve canlı görüntü modunda geliştirmeler..


 
A

alexei73

Registered
Messages
13
Thanks folks for this beta version so we can try it and report any bug to make it more robust.

I tryed MyTheatre 4.00 Beta3 with a Twinhan starbox USB VP7020 and it never got to see the device connected. Is it not longer going to support this device Mytheater?

I tryed Mytheater 3.36 and everything works perfect.

Thanks in advance
Alexei
 
F

fta24

Registered
Messages
2
I have tried twinhan's downloaded driver for 7020 from their web site and seems to be able to scan channels with emunation 3.0.5.1 but no picture. you cannot install drivers from previous driver, use a clean installation of the new driver.

again, I think it's emunation problem.
 
A

alexei73

Registered
Messages
13
Hi FTA24

One thing with the Twinhand VP7020. In order to work this card with privious versions of mytheater we needed to get rid of the factory drivers and use the drivers supplyed by mytheater. With the version 4 we have to use the factory drivers?
 
A

alexei73

Registered
Messages
13
Hi

I tried this new patched Mytheater 4 Beta-5 and yes it solved the issue with the card selection dropdown lists that were not showing. But still does not detect the card WDM
Twinhan Starbox (VP702X) using the same driver that works good with vertion 3.36 of Mytheater.

Is this new version not going to support this card anymore
 
B

burny

Registered
Messages
3
Hello
I've also tried this version with the card HVR4000.
The card is shown correct in setup but no build in TV also no signal by scanning the satellits.
After replacing the setup.ini from version 4.00 b5 with 3.38.2 and also all channels the card was found. - TV ok

burny
 
A

alexei73

Registered
Messages
13
My card, Twinhan Starbox (VP702X) is not even shown in the dropdown list. Maybe this new version is no longer going to support this hardware. Can anybody help me?
 
A

alexei73

Registered
Messages
13
can you please tell me what is "ps3"?

Hi Umberto, My theater does channel scan, I waould recommend using this feature of MyTheater. Anyways if you need the channel database I can send you mine. give an e-mail address. I can not upload anything to this site or at least I don't know how to do it.
 
A

alexei73

Registered
Messages
13
Hi folks

I like MyTheater and my plan is to stay with it. the card I have is getting a bit old <Twinhan Starbox (VP702X)> and it seems that Mytheater team is having issues with keeping compatibility with this card. If I have to buy a new one (I want a USB card) which card do you recommend to me?

Thanks
Alexei73
 
F

fr3man

Registered
Messages
1
I really need one post to download a softcam. By the way maybe there is a keygen for my theatre?
 
B

burny

Registered
Messages
3
Hi umberto70819 "Excuse me if I am involved, where you can find listings for channel mytheatre"

three files in folder \programfiles\mytheatre\ :

Channels.mdb
channels.mdb.backup
Channels.ldb

burny
 
M

marokino08

Super VIP
Messages
7,462
MyTheatre v4.0 Beta-7

- fix: numerous problems caused by switching to Unicode support.
- fix: MyTheatre could stop responding while detecting CAM module
- fix: Beta-6 couldn't accept registration key
- other fixes and enhancements.

DOWNLOAD
 
You must log in or register to reply here.
Top