Mates:
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon OpenAR-P Enigma2 Image of 25 November 2013.
Main Features:
1. Latest Satellite XML file of 4 December 2013include all satellites between 7 West to 122 East. Ku band and C Band on same position are included as separate satellites.
2. Softcams including CCcam, Mgcamd, Oscam, Camd3, Wiccard, CS2GBox, GBox, Incubuscamd, MultiCS & SBox are installed.
3. Latest Plugins including, MediaPortal 4.92, , CoolTV Guide 6.4.0, DD Subtitle Player 3.27, HDD Manager and MyTubePlayer installed. Recording on USB HDD possible using HDD Manager plugin. Many more plugins may be installed from built-in server.
5. It is possible now to grab screenshots with video.
4. Fully compatible with android applications like "Dreamdroid" and "Vu+ Player". Watching channels on android through "Vu+ Payer" streaming is possible.
6. New boot logo added. "Magic", "nBlack51" and "dTV-Reloaded HD" skins installed, more can be installed from built-in server. Keymap used is "Amiko" but it may be changed to "standard e2" by going to Menu>Setup>System>Key Map.
How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.
How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.
FTP Login details:
User: root
Password: root
Download from here:
Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 04-12-2013.rar
File password: engineerkhan15
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon OpenAR-P Enigma2 Image of 25 November 2013.
Main Features:
1. Latest Satellite XML file of 4 December 2013include all satellites between 7 West to 122 East. Ku band and C Band on same position are included as separate satellites.
2. Softcams including CCcam, Mgcamd, Oscam, Camd3, Wiccard, CS2GBox, GBox, Incubuscamd, MultiCS & SBox are installed.
3. Latest Plugins including, MediaPortal 4.92, , CoolTV Guide 6.4.0, DD Subtitle Player 3.27, HDD Manager and MyTubePlayer installed. Recording on USB HDD possible using HDD Manager plugin. Many more plugins may be installed from built-in server.
5. It is possible now to grab screenshots with video.
4. Fully compatible with android applications like "Dreamdroid" and "Vu+ Player". Watching channels on android through "Vu+ Payer" streaming is possible.
6. New boot logo added. "Magic", "nBlack51" and "dTV-Reloaded HD" skins installed, more can be installed from built-in server. Keymap used is "Amiko" but it may be changed to "standard e2" by going to Menu>Setup>System>Key Map.
How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.
How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.
FTP Login details:
User: root
Password: root
Download from here:
Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 04-12-2013.rar
File password: engineerkhan15