CANAL SAT HD

D

dionysos

Well Known Member
Messages
986
so this is what I have found on another forum posted by a reliable smod:

Csat / C+ HD Seca 3311 & 3315 work again, thanks to the Atlas HD100 receiver.
The main developer, Luffy, has solved the problem in the new firmware A112-2.
So you need to put your Seca Csat/C+ card in that receiver, then shared it through the Radegast protocol to your Dreambox.
Please note that it is not a false trick through the Pro cards 3317, but really solves the nano problem on the 3311 and 3315 cards.
I bought the receiver in Spain, for Fransat.
Yes, the breaking of the Seca nano is built-in the firmware of the receiver.
And, yes, you can share the ECM through the built-in server thanks to Radegast protocol.
There is no need to be sceptical: the receiver is built in Algeria and the firmware if developed by the Kyng team, which is also Algerian. If you follow the team, they have a strong history.
Click to expand...
 
O

Over The Top

Registered
Messages
11
thanks Dionysos
For me and on Oscam , haven't HD .
I have message : nano 01 not supported
I try CCcam 2.3.0 next time.
 
B

byshop

Registered
Messages
3
Over The top :

you have to use old oscam version 1.10 or earlier !

try and let us know ! ;)
 
S

samuelongui

Registered
Messages
34
I have this TNT card:

jazeer.jpg


now HD channels are blind, since some months ago they worked. SD channels are still on.

What's happened???
 
F

frenkkm

Registered
Messages
3
I will receive this days card Csat / C+ HD Seca 3311 & 3315,please can you explaine me how I can adjust to work on my Vu+,through oscam,CCcam,or with some other protocol if is posible,thx..
 
D

dgidgir

Registered
Messages
9
hello,

this time for the HD channels with a seca card, you must:

1) Atlas HD 100 or 200
2) if you have Vu+ or drembox then create a reader with protocol radegast to Atlas HD

Be careful not to share this reader without knowing the limitations of sid
 
Y

yakudi

Senior Member
Messages
123
who can solve surflock of irdeto 0604 irdeto 36e and nano E0 with nano 01 22w and viaccess 16e for africa? plz send private message to me soon, if your solution work good, so i can payment soon. thanks


i also used alats HD-100 for viaccess 16e, only can open a channel. any people can explan with me/?
 
S

sam_

Member
Messages
52
Hi Guyz,

It seems that a public OScam version (x86) has been released opening the CSAT HD seca nano 01.

Is there any way to adapt it to OScam dedicated to mipsel STBs ?

Regards.
 
S

sam_

Member
Messages
52
tolive said:
it's not mentionned on "oscam timeline"

last info about nano 01 :
http://www.streamboard.tv/oscam/ticket/3822


So if it's true ... not offical oscam revision

still working from atlas peer btw
regards
Click to expand...

That ticket concerns bad crc sent from proxies with cache-ex that brought about freeze solved by TheParasol patch.

Two needs identified for that mac address locked OScam version :
1. remove address MAC limitation or identify a means to adapt the hw id to that of the STB using MIPSEL OScam version
2. adapt that x86 linux pc version to OScam MIPSEL versions OE 1.6 or OE2.0

Cheers.
 
Last edited:
You must log in or register to reply here.
Top