• Discussion in the Admin room about nightly images, we dont really need or want these posting for the following reasons.

    1. We all know where to get them.
    2. Never have a change log.
    3. The changes if any are not worthy of anyone upgrading there boxes on a daily basis.
    4. They clutter the forum up.

    Posts will be removed.

    Ferret

Doombox 900 HD PVR TWIN - dongle incoporated

Ritx

Registered
Messages
71
l_10337507.jpg


Since this is relatively new Receiver in EU market we decided to wrote this short review

This is on Ali chip based TWIN hd PVR receiver with all the features and for the most demands. Presents excellent cardsharing features without any programming skills necessary. Tthanks to its two HD tuners and internet connection Rj45 you enjoy the most. Doombox 900 HD is pvr ready and has Time-Shift function to program any event recording. It records directly from TV (HD or SD) to any USB device (USB-Sticks, USB-HDD, etc)…

..And there is little more…

With firmware upgraded and secret menus activated, Doombox 900 HD offers you IKS (keys via internet) services, SDS services ( keys via satellite – no need to internet connection), twin protocol ( possibility to connect any third party dongle) and of course most used cardsharing protocols: Cccam and Newcamd. With IKS or SDS activated at the moment receiver opens almost all packages on Astra 19 – Incl. Csat France and D+ with all HD sports and movies channels.

Product Specification:


* Main Board (SMB.003.0X)
* Processor 396MHz MIPS CPU
*128MB DDR400 RAM clocked at 198Mhz
* 2MB Serial Flash
* Input 100V ~ 240V 50/60Hz
* Power Consumption: Max 30W / 1W stanby
* RS232 port for firmware update (also via usb )
* DVB-S / S2 standard * Frequency: 950MHz ~ 2150MHz
* Input Signal Level:-25dBm ~-65dBm
* Demodulation: QPSK, 8PSK, 16APSK
* Transport Stream: MPEG-2 ISO / IEC 13818 Transport Stream Specification
* Profile Level MPEG: MPEG2 SD, HD MPEG2, SD H-264/AVC, H264/AVC HD
* LNB Power & Polarisation: Vertical 13.5V, 18V Horizontal, Current: 500mA MAX
*Multi Satellite receiving: 22K switcher, DiSEqC 1.0, DiSEqC1.2, USAL
* Conditional Access system: 2 Common Interface Slots

Outputs audio and video:


YPbPr, CVBS with RCA, SCART with CVBS, HDMI (HDCP), Left / Right Analog audio output (RCA), Digital audio output (SPDIF coaxial cable or fiber)
Aspect Ratio: Auto, 16:9 Pillar Box, 4:3 Pan & Scan, 4:3 Letter Box
Audio Decoding: MPEG1 layer I, MPEG1 layer II, layer III MPEG1, MPEG2, AC3, AAC, OGG
Audio Mode: Stereo / Mono / Left / Right

Support recording:


DVR with USB HDD, USB HDD with Time shifting
USB2.0 High Speed ​​Host
1 USB2.0 Port, USB Media Player to playback the media in USB flash disk or USB HDD or USB card reader with memory card File system: FAT12, FAT16, FAT32, NTFS (supports only first partition)
Supported formats: JPG, BMP, MP3, WMA, AAC, OGG

Storage Temperature
◦ -10 ◦ C to 70 C
Operating Temperature
0 ◦ C to +50 ◦ C

Front panel:

Basic control functions are located on the front panel. Including such as Volume, Menu and conformation ( OK ) buttons. All buttons has blue backlit. Above them is a dark green eight-digit (alphanumeric) display, the contrast can be set via software. For longer names, the text on the screen abruptly moves from right to left.

After lifting the lid on the front side to get to two SmartCard readers and CAS for two CI slots for CA modules. There is also a PVR USB 2.0 port. With latest firmware update Doombox 900 HD smartcard reader turns MultiCas and can recognize several pay tv cards incl. Portuguese MEO.

Rear panel

On the rear panel from left you will find two pairs of F connectors. 2x LNB IN (input from the dish), 2x LNB Loop Out (outputs of set-top box), as well as Ethernet and HDMI port after follows an RS 232 port and below the optical output for Dolby Digital Audio (S / PDIF). Component video output RCA YPbPr - HD, RJ45, CVBS (Composite) Video & Audio Output via RCA - RGB. The last port is SCART. Then it closes the list of rocker power switch and power cord firmly embedded.

Remote control

Remote control is robust and feels really great in hand. Its lower part is with a matt black slip, its upper part is a combination of glossy black, chrome and silver metallic. R/C comes with two AAA batteries.

Description
The receiver has a multilingual graphical user interface OSD (Czech, English, French, Russian, Arabic, Turkish, German, Polish, Spanish, Italian, Dutch and Portuguese). Basically it is quite similar to almost all Ali chip based receivers such as GI9966E, Opticum X7 etc. Simple, good graphics, ver “Users-friendly” It has "blind scan" function,8 favorite channel lists.

If you have a receiver connected to the Internet it is possible to upgrade transponder lists directly from King of sat web page. For first time, when you upgrade the firmware , you have to activate “Secret Menu” . enter Menu –Installation and pres 7777. The screen with sharing menu will pop up. As we mention before, Doombox 900 Hd offers several sharing options:

IKS ( keys over internet) – basically it works the same as already well known Protex, Proton or Spiderbox . Conect your Doombox 900 hd with rooter, choose IKS option on and it will give you access to some remote server. All operation is cripted, so we can´t see server location, neither sharing protocol used.

SDS ( or SKS – keys over satellite) is another sharing option very widely used in Latin America finally available also in Europe. This is sharing system without internet connection. For SDS sharing you have to have two dishes installed – the first you put on astar, hotbird, Intelsat etc. (you can even use motor). The second dish is used for data receiving, so you have to point it to Eutelsat W3E 7ºE satellite.

Twin protocol
– this option allows connect third party dongles to Doombox900 HD.

Sppp – we still did not find how to use this option.

Cccam ( client only)
– there is no need to explain how to use this protocol. Works very stabile even with servers 2.2.1

Newcamd
–also don´t need any introduction….

EPG

Electronic Program Guide (EPG) can be displayed for 16 days in advance. The names of the programs are reduced. Each preset can view a detailed description of the broadcast program. EPG also provides a timer.

PVR and multimedia

An external drive formatted in Fat32 or NTFS can be connected to Doombox 900 HD. Recordings in the SD format are stored on disk in a format PS (program stream - compression format for multiplexing digital audio, video and others, but no subtitles or text), or TS (Transport Stream - This format includes all the transmitted information). HD recordings are stored only in the TS. We successfully connect 500 gigabytes external hard drive but Disk 1 TB has not been found.

Final words.

Doombox 900 Hd is excellent and not expensive satellite receiver with really good “extra services” . It is already well known in Spain, Brazil (under the name AZbox Bravo) and Eastern Europe. You don´t need to be Linux guru to operate. The built quality is excellent, the picture quality is very good even on 50 inch Led screen. Even if you don´t pretend to use IKS or SDS or even CS, This is really good HD TWIN receiver to work with your official MEO card.

P.S

IKS and SDS at the moment opens:

Astra 19ºE : Csat France, D+, Canal Digitaal, Sky de – not full package.

Hotbird 13ºE : All sex, Nova Greece , TV Globo Inertntional, Al Jazeera Sport 1 – 10, , Cyfra+ – not full package, Sky It– not full package

Intelsat 0.8ºW: Digi TV * ( not verified)

Nilesat 7ºW : Al Jazeera Sport 1 – 10 incl HD, ( not verified)

Hispasat 30ºW - TV ZoN



The channel list is constantly growing.

P.P.S Doombox 900 hd also aviable under comercial names Dreamsky 8080 and AzBox Bravo.

doombox webs team
 

mufi

Registered
Messages
8
Todo en uno Doombox 900 HD

AIO Doombox 900 HD

Code:
http://www.multiupload.com/Z2FEWWWVRY

:thum:
 

Ritx

Registered
Messages
71
Latest firmware for Doombox 900HD

SDS-Active / IKS - active
We recommend saving a backup, and channel list before upgrade.

Attached updated Doombox HD SW for W6 sharing fixed - New color channels list sds.

dOOmbox_3.2.97
 

Ritx

Registered
Messages
71
Channel List for dOOmbox_3.2.97 firm: Hispasat 30ºW - Nilesat 7ºW - Intelsat 08ºW - Hotbird 13ºE - Astra 19ºE - Astra2 - 28ºE

DOWNLOAD
 

bonou2

Registered
Messages
375
Firmware dOOmboxhd v3.2.13168 (09-12-2011)

Recomendamos hacer una copia de seguridad y copia de la lista de canales antes de actualizar.

We recommend saving a backup, and channel list before upgrade.


Changelog v3.2.13168 (09-12-2011)


•Problema SDS corregido.


•fixed SDS problem

http://www.megaupload.com/?d=MVE5Q71Z
 

raul7

Super VIP
Messages
1,541
Firmware dOOmboxhd EU v.3.2.16919

Firmware dOOmboxhd EU v.3.2.16919 (29-06-2012)


We recommend saving a backup, and channel list before upgrade.


Changelog v.3.2.16919 (29-06-2012)
 

Milário

Registered
Messages
2
Como instalar Bravoo_7000HD_ALI3602-2013-07-06 USB? RS232?
Con USB da invalid file. Como se instala via RS232?
 

bonou2

Registered
Messages
375
Nuevo firm para SDS que trabaja por W3 con el mando original del doombox. En unos momentos en cuanto estea mejor testeado lo cuelgo. Es una variación del Bravoo 7000 hd pero para chip 3602.


"Instruciones carga de firm en doombox mediante cable nullmodem y el "Doombox Tool"

1.Selecionar Com1 (o el puerto que utilizes en tu pc) - 115200 - Even

2. Selecionar en operate mode : upgrade

3. En file darle "browse" y selecionar donde tenemos el file que le queremos meter

4.Marcar la casilla "include Bootlader"

5.Darle a la casilla NEXT, el programa esperar ahora que enciendas tu aparato desde el boton de atras

6. Si has hecho todo bien la carga deberia comenzar ahora despues de aparecer DONE en el programa.

7. esperar que cargue, y cuando termine se le da otra vez NEXT para grabarlo en el deco

8. al final el deco se enciende solo y el programa esta cargado, sino es asi repasa los pasos otra vez

gracias to@deivicinho y paquitosat

suerte y sal U2
 
Top