File To Big Errore!! And Is Not A Valid... Errore!!

S

star_man

Banned
Messages
21
hi all

i change my sim with this topic
to ferrari sim!
and then i download DM800-SSL78F.nfi and i transfer with IE to receiver!

now my receiver have erroe!!
in panel:
CA Not Found
and if i use dream up i have this errore:
IS NOT A VALID INTEGER Value

And i use dreamup patched and Enforcer and again i have this errore File To Big!!

Please Help To ME!!

Regards
 
Last edited by a moderator:
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
For the file too big error try using enforcer with null and ethernet cable flashing over network.

Ferret
 
S

star_man

Banned
Messages
21
thx for answering!
but how i can flash my box over network?
because when i start my box automatin show me ERR01: CA Not Found!!
And Dont Show To ME IP!!
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
You start enforcer to get connection to 800 then tick network in enforcer, front display should show you a IP use that ip in browser to flash.
 
S

star_man

Banned
Messages
21
dear i use this way but dont work!!
because i show on front panel receiver :
ERR01: No CA Found

and dont show to me ip!
 
B

Brummie

Staff member
Administrator
Messages
5,794
go here and download this http://www.sat-universe.com/showthread.php?t=141826

open dreamup that comes with this in the different method folder and click on connect then insert the power cable on the dreambox,make sure you tick use network, then drag the enforcer on top of the dreamup software thats open on your desktop and then click on enable,then the flash button on dreamup should come into action, click on flash locate the image and let it flash.

if that does not work insert null nodem cable go through the same procedure but after you click on connect look at the led screen when you insert the power cable and it will say serial mode or something like that and you will see an ip on the led screen, put that ip into your url and flash it the normal way through your web browser.
 
S

star_man

Banned
Messages
21
Hi All.

i have a problem with my box.
i see on pannel ERR01 CA Not Found!!

my dm is before bootloader 70 and i upgrade to ferari image.(FREE UPGRADE Sim 1 to FERRARI CARD 1.2)(1-flash your box with "free-ferrari-upgrade-1-2"
2-At plugins choose "genuine ferrari"
3-click on free sim1 --> to ferrari card
4-attend the message update card ok
5-flash the dreambox with a ferrari image with SS76FF3 inside)
then i flash bootloader to SS78 Ferari.

Now I Have Errore IN My Box...
ERR01 CA Not Found!!

I Use Many Way But Not OK!!
i use DreamUP Patched and when time i send flash image i have erore File To Big...

Can Any One Help To Me?

Regards
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
You had this problem before as of the start of this thread and you appear to have solved it then try all the above again.

With the file to big its either the sim is not correctly installed remove it and replace it or you nned to flash with Enforcer with both null modem and Ethernet connected as explained above.
 
S

star_man

Banned
Messages
21
hi again'
i remove sim card an d install again!
i flash with enforcer but i have some problem!!
when time i turn on my box i go to ERR01 CA NOT FOUND!!!
and never i see any thing!
and when time i use dreamup enforcer flash is online in dreamup and i cant send any file to box! just ERRORE File To Big!!
 
N

nacer1963

Registered
Messages
111
star_man said:
hi again'
i remove sim card an d install again!
i flash with enforcer but i have some problem!!
when time i turn on my box i go to ERR01 CA NOT FOUND!!!
and never i see any thing!
and when time i use dreamup enforcer flash is online in dreamup and i cant send any file to box! just ERRORE File To Big!!
Click to expand...


hello,
connect the RJ45 cable and RS232 cable dreamup
patched, and put an active network ip (ip remote box)
other than the PC and connect is now lighter
the dream, you normally will have this message (box IS
net ..... HTTP mode) at the end looks on the LED screen you
see ip with a serial mode.là you can flash the
the web or dreamup.
re hit with dreamup patch and before connect,
drag the file on dreamup DM800_repair.exe
a +
 
S

star_man

Banned
Messages
21
hi mate

i use youre way!
i conect to rj45 and ra232 but when time i turn on my box i go to err01 ca not found in pannel!
and not get any ip or http in panel my box!
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
Hi mate

When you press the connect button on the patched dreamup does dreamup say uploading flash-loader and if so does it complete ?
 
S

star_man

Banned
Messages
21
no mate.
just flash button in dreamup patch is turn on!
and when time i use any image i have errore Big File!
i think my box not give any ip !!
but i see that LAN led is turned on.

regards for answering to me...
 
B

Brummie

Staff member
Administrator
Messages
5,794
connect the RJ45 cable and RS232 cable open dreamup and select use network box aswell and then press on connect,at this point now insert the power cablet at the back.

look on the led screen does it say serial mode and you see the ip.....????
 
N

nacer1963

Registered
Messages
111
try this trick, launching (connect) and dreamup
turning the dream, dreamup automatically display
PC's IP and the IP of the dream (ip remote box) this tape
latest on the search engine preferably with IE
image image dm800 CSHA 20080404082007.nfi.zip
bootloader 59 http://www.mediafire.com/ here? rbxyj8hdsm4y165

otherwise it is a hard problem (hardware) welding or
component grilled weapon you patience and your check
material carefully
 
S

star_man

Banned
Messages
21
Brummie said:
connect the RJ45 cable and RS232 cable open dreamup and select use network box aswell and then press on connect,at this point now insert the power cablet at the back.

look on the led screen does it say serial mode and you see the ip.....????
Click to expand...
hi my dear

now my box is ok!

really thanks too all member of this site.

REGARDS
 
L

Lee1501

Registered
Messages
1
File too Big FIXED for me

File too big FIXED for me !!!!

Hi all, I had the file too big error for days, I eventually discovered that the fault was the serial cable I was using. I bought from ebay a NULL MODEM serial cable. (eg. See ebay item 180481856158) With this cable, I didn't even need to use the enforcer program, dreamup worked as expected, it immediately recognised the box, the status bar increased and the flash button became available automatically. This time when I selected the file, it DID NOT report a file too big error. I'm very happy!

by the way. I plugged this cable in to a USB to serial convertor, and flashed with a modern laptop with USB ports only and no serial port.

I hope this helps
 
J

jarraz59

Registered
Messages
10
how to fix no CA

If you have /or can get other dm800 you can fix this by start dreamup 1.3.3.9 on the working dm800 and when it get ip chance the network and the comport cable to the broken dm and you have ip on the broken dm then you go to your browsner and flash ssl first then the image:thum::thum:
Do not forget that you have to have power on both boxes
GOOD LUCK
 
Last edited:
You must log in or register to reply here.
Top