Aiuto Conf. Osc*m+mgcamd per tivusat
- Thread starter claudio42
- Start date
in oscam.user
[account]
User = a piacere
Pwd = tivusat
Uniq = 1
Group = 1
caid = 183D
ident = 183D:005411
Sleep = 0
AU = tivusat
monlevel = 0
oscam.conf(alcune cose possono anche variare a seconda della ersione, e non essere più necessarie, ma questa a sempre bene
)
[global]
Nice = -1
ClientTimeout = 5
FallbackTimeout = 2
ClientMaxIdle = 120
CacheDelay = 20
BindWait = 60
ResolveDelay = 15
WaitForCards = 1
#LogFile = stdout
#LogFile = /dev/console
LogFile = /tmp/oscam.log
PidFile = /tmp/oscam.pid
UsrFile = /tmp/oscam-user.log
[webif]
HttpPort = 1001
HttpUser = http
HttpPwd = interface
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.1-192.168.0.100,192.168.178.1-192.168.178.250
#[cs357x]
#Port = 23456
[newcamd]
Key = 0102030405060708091011121314
Port = 10000@1830:003411
Port = 10001@1702:000000
Port = 10002@1722:000000
Port = 10003@1838:000000
Port = 10004@0d95:000000
Port = 10005@0d05:000004
Port = 10008@183D:005411
#Port = 10006@0500:023800
#Port = 10007@0B00:000000 (quello che non serve può essere eliminato, ma non da noia)
In oscam.server
[reader]
Label = tivusat
Enable = 1
Protocol = internal
Device = /dev/scm0 #(QUI mettere la tua device in base al cardreader usato , se non hai altre card o altri cardreader: sci0 )
Mhz = 368
cardmhz = 368
Detect = CD
deprecated = 1
EMMCache = 1,3,2
Fallback = 0
Group = 1
caid = 183D
tiger_rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
# tiger_ideakey = 37373737373737373737373737373737
AU = tivusat
in newcamd.list
#CWS_KEEPALIVE = 300
#CWS_INCOMING_PORT = 12000
CWS_MULTIPLE = localhost 20000:20009 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS= localhost 10000 cool Intern-HD+ 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10001 cool Intern-S02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10002 cool Intern-D02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10003 cool Intern-UM02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10004 cool Intern-ORF(ICE) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10005 cool Intern-ORF 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10006 cool hd6 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10007 cool hd7 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10008 cool tivusat 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10009 cool hd9 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
OCCHIO ai settaggi in mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
[account]
User = a piacere
Pwd = tivusat
Uniq = 1
Group = 1
caid = 183D
ident = 183D:005411
Sleep = 0
AU = tivusat
monlevel = 0
oscam.conf(alcune cose possono anche variare a seconda della ersione, e non essere più necessarie, ma questa a sempre bene
)[global]
Nice = -1
ClientTimeout = 5
FallbackTimeout = 2
ClientMaxIdle = 120
CacheDelay = 20
BindWait = 60
ResolveDelay = 15
WaitForCards = 1
#LogFile = stdout
#LogFile = /dev/console
LogFile = /tmp/oscam.log
PidFile = /tmp/oscam.pid
UsrFile = /tmp/oscam-user.log
[webif]
HttpPort = 1001
HttpUser = http
HttpPwd = interface
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.1-192.168.0.100,192.168.178.1-192.168.178.250
#[cs357x]
#Port = 23456
[newcamd]
Key = 0102030405060708091011121314
Port = 10000@1830:003411
Port = 10001@1702:000000
Port = 10002@1722:000000
Port = 10003@1838:000000
Port = 10004@0d95:000000
Port = 10005@0d05:000004
Port = 10008@183D:005411
#Port = 10006@0500:023800
#Port = 10007@0B00:000000 (quello che non serve può essere eliminato, ma non da noia)
In oscam.server
[reader]
Label = tivusat
Enable = 1
Protocol = internal
Device = /dev/scm0 #(QUI mettere la tua device in base al cardreader usato , se non hai altre card o altri cardreader: sci0 )
Mhz = 368
cardmhz = 368
Detect = CD
deprecated = 1
EMMCache = 1,3,2
Fallback = 0
Group = 1
caid = 183D
tiger_rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
# tiger_ideakey = 37373737373737373737373737373737
AU = tivusat
in newcamd.list
#CWS_KEEPALIVE = 300
#CWS_INCOMING_PORT = 12000
CWS_MULTIPLE = localhost 20000:20009 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS= localhost 10000 cool Intern-HD+ 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10001 cool Intern-S02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10002 cool Intern-D02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10003 cool Intern-UM02 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10004 cool Intern-ORF(ICE) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10005 cool Intern-ORF 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10006 cool hd6 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10007 cool hd7 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
CWS= localhost 10008 cool tivusat 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
#CWS= localhost 10009 cool hd9 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
OCCHIO ai settaggi in mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }