E2 Automatic Volume Adjustment Plugin
Description:
With AutomaticVolumeAdjustment can automatically adjust the volume (can be changed relational to the current volume), if you switch to AC3/DTS transmitter. It can be set in the config for the plugin a general value for all AC3/DTS transmitter, and you have the possibility to contact each sender individually to a value.
Explanation of the operation of an example:
the current default volume is at 60, standing on a station with mpeg-tone, Default AC3/DTS is a value of 25, individual value for ARD HD = 35
A) one now turns on ARD HD, so the volume automatically goes up to 95
2) Turn it on ArteHD, so the volume goes to 85
3) Turn it on Fox, so the volume goes to 60
4) Turn it on Cinema HD, so goes the Lautstäke to 85
etc. etc.
By changing the volume, so a new value is then determined relational ...
5) I'm on Cinema HD, volume = 85, I put 10 to 95 higher values by remote control
6) Turn it on ARD-HD, so does the volume to 100
7) Turn it on Fox, so the volume goes to 70
8) Turn it on CinemaHD, so the volume goes to 95
etc. etc.
If you stand on a non-AC3 audio channel, and the volume is on 100, so naturally when switching to a channel AC3 nothing changed ... it jumps back again, the volume level is still 100th ..
Config:
The config can be found under Main Menu -> Settings -> System -> Automatic Volume Adjustment
Here you can set the plugin on or off, the default value or on the blue button to make individual settings for the transmitter.
The box must not be restarted after the config, the new values are immediately accepted at the moment stores.
The plugin is (tomorrow) to the experimental feeds in DMM.
Have fun with it, because whosoever can use.
Dr. Best
Description:
With AutomaticVolumeAdjustment can automatically adjust the volume (can be changed relational to the current volume), if you switch to AC3/DTS transmitter. It can be set in the config for the plugin a general value for all AC3/DTS transmitter, and you have the possibility to contact each sender individually to a value.
Explanation of the operation of an example:
the current default volume is at 60, standing on a station with mpeg-tone, Default AC3/DTS is a value of 25, individual value for ARD HD = 35
A) one now turns on ARD HD, so the volume automatically goes up to 95
2) Turn it on ArteHD, so the volume goes to 85
3) Turn it on Fox, so the volume goes to 60
4) Turn it on Cinema HD, so goes the Lautstäke to 85
etc. etc.
By changing the volume, so a new value is then determined relational ...
5) I'm on Cinema HD, volume = 85, I put 10 to 95 higher values by remote control
6) Turn it on ARD-HD, so does the volume to 100
7) Turn it on Fox, so the volume goes to 70
8) Turn it on CinemaHD, so the volume goes to 95
etc. etc.
If you stand on a non-AC3 audio channel, and the volume is on 100, so naturally when switching to a channel AC3 nothing changed ... it jumps back again, the volume level is still 100th ..
Config:
The config can be found under Main Menu -> Settings -> System -> Automatic Volume Adjustment
Here you can set the plugin on or off, the default value or on the blue button to make individual settings for the transmitter.
The box must not be restarted after the config, the new values are immediately accepted at the moment stores.
The plugin is (tomorrow) to the experimental feeds in DMM.
Have fun with it, because whosoever can use.
Dr. Best
Code:
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutomaticVolumeAdjustment