- Messages
- 10,198
Code:
For the software and update channel lists are image files (. Img) available, what about
the rear is at the USB2.0 interface can be installed.
- On the USB stick following folder structure "kathrein/ufs902" Creating
Software file "*. img" and channel list "*. img" in the folder "kathrein/ufs902 copy (* Name
the file)
Note: USB stick must be formatted FAT/FAT32.
- UFS 902 off (Network OFF)
- Connect USB Stick
- TV / R button on the front side of the receiver, press and hold
- UFS 902 switch (network A)
- TV / R button and hold
- Appears in the display after a short time, the "Emergency Boot" and then "Update"
- If the receiver now for the update file is found, it appears in the display "Update Cnt x" (x
is the number of update files found)
Note: do not "update Cnt x" for example NO FOLDER, just the TV / R button
longer hold, the update process starts anew.
- After that, the TV / R button released
- Now start the receiver the update appears in the display Æ "yy x ER" and x WR yy
x number of the update file
yy percent
- Has performed the updates, start the UFS 902 independently again
- After that, the USB stick to be removed