Go Back   Sat Universe > Dreambox (SD Models) > Other Dreambox Files > Dreambox Tutorials

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

Guides HowTo make some tip and tricks on your Dreambox

Dreambox Tutorials

Closed Thread
  #11  
Old 22-08-2007, 16:49  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
RIDER's Avatar
RIDER RIDER is offline
"Vanity is definitely my favorite sin"
 
Join Date: Jul 2006
Location: Hunting you everyware
Posts: 7,851
Thanks: 2,195
Thanked 5,871 Times in 2,677 Posts
Country: Country Flag
Default

Next...with emu 'camd3' (found in path 'var/keys/camd3.keys')



As above open TuxBox Commander, you will see that the opening screen is the one that you last used.
To get to the required 'camd3.keys' file, highlight the two dots '..' at the left of the screen and press 'ok' on the remote.
Scroll up to 'keys', highlight and press 'ok', then scroll down to 'camd3.keys',
highlight and DO NOT press 'ok' but instead press number '4' on remote to enter the edit mode
(same as when editing 'tpscrypt' file above).

The 'camd3.keys' file is obviously very large with so many op keys, scroll down to find, in this case,
under the heading 'Viaccess', then key line '0500:007c00:0000000000:80 etc etc' (take care that it is the correct line,
in this instance, for the daily 'TPS' change). Highlight the line and press ok on the remote to enter the live edit mode.

With this softcam you only need to edit the 32 key line WITHOUT spaces, unlike the 'tpscrypt' file in newcamd.
When complete press 'ok' then 'Exit', then select 'yes' to save. Now, if you wish,
you can check the rights by pressing mumber '1' on the remote. If all are green then select 'ok' and press 'ok' on remote, press 'Exit' on remote, select 'yes' and press 'ok' on remote.

May need to restart your softcam as normal, selecting your preferred , through the blue button.
__________________
Ask yourself NOT what you can get from SAT,UNIVERSE
BUT
what you can give to the SAT,UNIVERSE community


"Vengeance is mine;I will repay,saith the lord"
" I will have my vengeance, in this life or the next."
The Following 2 Users Say Thank You to RIDER For This Useful Post:
Joepke (10-03-2009), pari (14-04-2008)
  #12  
Old 22-08-2007, 16:50  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
RIDER's Avatar
RIDER RIDER is offline
"Vanity is definitely my favorite sin"
 
Join Date: Jul 2006
Location: Hunting you everyware
Posts: 7,851
Thanks: 2,195
Thanked 5,871 Times in 2,677 Posts
Country: Country Flag
Default

Example of how to... ADD A NEW LINE to an existing file, in this case... 'constantcw'.
Recently, two lines of provider keys etc for the 2x Red Light channels at 13ºE, needed to be added to the 'constantcw' file.

Copy MANUALLY the contents/amendments that you wish to ADD to your EXISTING 'constantcw' file,
ie: the new details if your Dreambox is not connected to Internet or, situated elsewhere.

Firstly with 'newcamd'

Open 'TuxBox Commander' and follow the path to the file via:

a) 'var/scce/constantcw'
cool.gif Highlight 'constantcw' then press '4 Edit' with remote control
c) Green button.. 'Insert Line' command on remote- add the two SEPERATE lines for the two channels.
d) 'Exit' on the remote and 'save' as previously advised above....

The file in existence already contained the working 'cw' lines for the MTV's etc at 19ºE, so only had to use the 'Insert Line' feature.



......and finished!

Next with emu 'camd3' (although slightly different data input) but opening line and path to the file via:

a) 'var/keys/camd3.keys'
cool.gif,c)and d), as above.

Main point....YES had to obtain the 'cw' file info, but editing/updating all done with no internet connection/FTP etc,
is found to be very useful for those folk who do not have the Dreambox permanently connected to the PC.


Again the above is based on using Gemini 2.6 but basically same on DaVinci etc, depending on your placement of keys.

Have indicated the two commonly used softcams but MGCamd,Evocamd, Scam, Camx, F Biss, ****,
can all be handled.

If you simply want to look at the files and their contents but NOT edit, highlight the file and
(referring to the menu on bottom of screen) press '3' on the remote to 'view' only....no danger at all of any editing in error!
__________________
Ask yourself NOT what you can get from SAT,UNIVERSE
BUT
what you can give to the SAT,UNIVERSE community


"Vengeance is mine;I will repay,saith the lord"
" I will have my vengeance, in this life or the next."
The Following 2 Users Say Thank You to RIDER For This Useful Post:
mathreg (18-10-2008), pari (14-04-2008)
  #13  
Old 22-08-2007, 16:50  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
RIDER's Avatar
RIDER RIDER is offline
"Vanity is definitely my favorite sin"
 
Join Date: Jul 2006
Location: Hunting you everyware
Posts: 7,851
Thanks: 2,195
Thanked 5,871 Times in 2,677 Posts
Country: Country Flag
Default

Guide to Emu's and their respective key directories/ paths to edit files:

Newcamd: = 'var/scce/constantcw,keylist,rsakeylist,tpscrypt'
or = 'var/tuxbox/scce/constantcw,keylist,rsakeylist,tpscrypt' ....depending on Dreambox/image.

Camd3: = 'var/keys/camd3.keys'

Biss: = 'var/keys/biss_key'

Evocamd: = 'var/keys/Autoupdate.Key' and 'Keylist.txt'

MGcamd: = 'var/keys/AutoRoll.Key' and 'SoftCam.Key'

CamX: = 'var/keys/SoftCam.Key'

Scam: = 'var/keys/irdeto,nagra,seca,tps,via' etc

****: = 'var/keys/irdeto,nagra,seca,tps,via' etc
__________________
Ask yourself NOT what you can get from SAT,UNIVERSE
BUT
what you can give to the SAT,UNIVERSE community


"Vengeance is mine;I will repay,saith the lord"
" I will have my vengeance, in this life or the next."
The Following 3 Users Say Thank You to RIDER For This Useful Post:
Joepke (10-03-2009), mathreg (18-10-2008), pari (14-04-2008)
  #14  
Old 22-08-2007, 16:51  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
RIDER's Avatar
RIDER RIDER is offline
"Vanity is definitely my favorite sin"
 
Join Date: Jul 2006
Location: Hunting you everyware
Posts: 7,851
Thanks: 2,195
Thanked 5,871 Times in 2,677 Posts
Country: Country Flag
Default

There are lots of other things which you will pick up with trial and error and you will certainly get to know the correct paths for the softcam files!!

LAST COMMENT - Do NOT forget to protect yourself by backing up your image before you edit, think this is good practice whatever prog/plugin you use with the Dreambox.

Hope you derive some learning and satisfaction from this great plugin.

Would appreciate constructive critisism and updates/additions on this posting for peoples easier use. - please PM remarks or open a new thread in the Dreambox section!

All said and done the Dreambox is a truly fantastic receiver.
__________________
Ask yourself NOT what you can get from SAT,UNIVERSE
BUT
what you can give to the SAT,UNIVERSE community


"Vengeance is mine;I will repay,saith the lord"
" I will have my vengeance, in this life or the next."
The Following 7 Users Say Thank You to RIDER For This Useful Post:
arifagic (19-04-2008), atm (23-08-2007), bugia (24-09-2007), [email protected] (11-04-2009), McFLY (22-08-2007), samsonsam (20-10-2007), stanleyshng (22-09-2007)
  #15  
Old 11-04-2009, 16:15  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
k@lkov's Avatar
[email protected] k@lkov is offline
 
Join Date: Dec 2007
Location: Joe Louis Arena
Posts: 10,004
Thanks: 26,510
Thanked 38,811 Times in 8,799 Posts
Default Guides HowTo make some tip and tricks on your dreambox

Code:
How to Find your Dreambox Pin using Tuxbox Commander

For whatever reason, there may be a pin code set on your dreambox. 
Sometimes this is done to keep nosey people changing settings and 
messing things up. It’s also used to block certain channels if you don’t 
want the kids accessing them (if you know that I mean).

If you forget that pin, usually you would flash an image that you know 
doesn’t have the pin code set.

Or…you can use the tuxbox commander plugin to get the pin. 
Most images have this plugin and it’s accessable via the plugins 
menu, usually yellow or blue button.

Go to /var/tuxbox/config/enigma…

There’s a file called config

View it and look for lines like…

i:/elitedvb/pins/parentallock=
i:/elitedvb/pins/setuplock=

These are hex numbers. Use your windows calculator in Scientific mode, 
click on Hex, enter the value in your file (last 4 numbers, not with the 
zeros in front of them), click Dec and that will be your pin.
__________________
Note: Viewing Pay TV without a valid subscription is illegal
All the files available here are kept for experimental and educational purpose only
NO CARD SHARING DISCUSSIONS
No support via PM
Use the "THANKS" button
Read the next few threads and all will be OK:

---> RULES <---
---> RESPECT TO BE RESPECTED <---
---> ATTACHMENT DOWNLOAD LIMITS <---
---> THANKS BUTTON <---
---> SIGNATURE <---
http://www.sat-universe.com/imagehos...a5bf67c301.gif


The Following 3 Users Say Thank You to [email protected] For This Useful Post:
behnam (11-04-2009), m7ckey (02-10-2009), RIDER (11-04-2009)
  #16  
Old 11-04-2009, 16:26  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
k@lkov's Avatar
[email protected] k@lkov is offline
 
Join Date: Dec 2007
Location: Joe Louis Arena
Posts: 10,004
Thanks: 26,510
Thanked 38,811 Times in 8,799 Posts
Default Guides HowTo make some tip and tricks on your Dreambox

How to Connect your Dreambox to your PC

You might want to connect your dreambox to your PC for a number
of reasons; stream MP3s or movies from your PC to the dreambox,
record from the dreambox to a shared folder on your PC, to update
the image, services or bouquets, etc.

What is needed
If your dreambox is going to be connected straight to your PC then
you will need a crossover ethernet cable. This is not the same as a
standard patch ethernet cable that you get with your router or cable
modem, the send and receive wires are crossed, hence the name.
This cable is more commonly used to connect ethernet equipped
PCs together without a hub or router. But we need it to connect
to the dreambox as well.

Configuring your PC
One side of the crossover cable needs to be connected to your PC,
obviously. Most PCs only have one ethernet connection and it’s usually
used for the internet connection. It’s advisable to buy a second network
card and keep it solely for the use of the dreambox, these are about £5
from your local computer shop. But this guide will show you how to
connect it to you existing ethernet connection.

I’m using Windows XP Pro but the steps may be different for other
operating systems.

Go to the Control Panel then Network Connections. Find the ethernet
connection that you would use for your internet. Right click it and select
Properties. Scroll down to ‘Internet Protocol (TCP/IP)’ and select Properties.
If you do use this connection for your internet then it should have the
‘Obtain an ip address automatically’ selected. Change the settings so
that it looks like this…



Select OK and reboot your PC. Remember at this point you will not have
any internet access so make sure you have a copy of all the guides and
tools that you need. Or connect your modem via USB.

Configuring your Dreambox
I will use an enigma image in this example, neutrino can also be used
and the same values should be used although the menus may look
different and be in a different place.

Go to Menu > Setup > Expert Setup > Communication Setup

Change the settings to look like this…



Select Save and exit from the other menus.

Connecting to the Dreambox
To connect to the dreambox we are going to use an FTP Client. There
are many programs available for this, FlashFXP, CuteFTP, Filezilla and
SmartFTP are some examples. For this guide we are going to use FlashFXP.

Once you’ve downloaded it, run the flashfxp.exe file and the program will load.

In the left window is where the dreambox file system will appear after we
connect. In the right window is your PC file system. Treat both windows
like any other windows explorer window. To transfer files between the
dreambx and PC, cimply drag the file from one window to the other and
wait for it to transfer. The bottom left window shows a history of the files
transferred and the progress of current files during transfer.

Near the top, on the toolbar, you should see an icon with a lightening strike
on it, click it and choose ‘Quick connect’ (you can also press F8 on your
keyboard). Configure the options to look like this…



Server or URL: 192.168.1.101

Username: root

Password: dreambox

Port: 21

Click Connect.

You should now see the file system of the dreambox on the left,
i.e. /bin, /dev, /etc, /hdd, /sbin, /var, etc etc.

Source: dreamboxtips.
__________________
Note: Viewing Pay TV without a valid subscription is illegal
All the files available here are kept for experimental and educational purpose only
NO CARD SHARING DISCUSSIONS
No support via PM
Use the "THANKS" button
Read the next few threads and all will be OK:

---> RULES <---
---> RESPECT TO BE RESPECTED <---
---> ATTACHMENT DOWNLOAD LIMITS <---
---> THANKS BUTTON <---
---> SIGNATURE <---
http://www.sat-universe.com/imagehos...a5bf67c301.gif


The Following 6 Users Say Thank You to [email protected] For This Useful Post:
Hemen-19 (03-08-2009), kotkotkot (31-01-2010), m7ckey (02-10-2009), RIDER (11-04-2009), sp987 (13-08-2009), sstylianou (12-04-2009)
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 00:10.


Powered by vBulletin
Copyright ©2006-2016 - Sat Universe