Oscam Manual

Status
Not open for further replies.

elgeneral

Registered
Messages
7,811
Manual OSCAM

Example with DM 500

Gracias a acetatus

TgC_Navidad_25.gif
 

elgeneral

Registered
Messages
7,811
How to install OSCAM to UBUNTU

Since many have been trying to get OSCAM working on UBUNTU with no luck, decided to write up a quick tutorial for getting it to work.

(I have had this running for a couple of days now on ubuntu server, with an ORANGE sub (096c), glitch free)


Code:
cd /lib/
sudo ln -s libcrypto.so.0.9.8e libcrypto.so.0.9.8
sudo apt-get install yum
cd /usr/local/bin/
sudo apt-get install subversion
sudo svn co http://oscam.ump2002.net/svn/oscam/trunk oscam-svn
cd oscam-svn/
sudo apt-get install cmake
sudo mkdir build_dir
cd build_dir
sudo cmake /usr/local/bin/oscam-svn
sudo make
sudo make install
now make your configuration files and place them in /usr/local/etc

oscam.server

Code:
[reader]
label    = fx
protocol = mouse
detect   = CD
device   = /dev/ttyUSB0
mhz = 600
EMMCache = 1,1,2
Group = 1
caid     = 096c
boxid = ********
oscam.conf
Code:
[global]
nice	      = -19
WaitForCards  = 1
[monitor]
port	      = 988
aulow	      = 120
monlevel      = 0
[newcamd]
key           = 0102030405060708091011121314
port          = 10000@096c:000000;

oscam.user

Code:
[account]
user       = test
pwd        = test
uniq       = 1
group      = 1
au         = fx
ident      = 096c:000000
caid       = 096c

now back to terminal:

Code:
sudo oscam -b

now check /var/log/oscam.log for the news..
also,

to calculate boxkey for the new orange sub:
1. get your 11 digit box serial (101*******5)
2. remove the last digit ONLY (101*******) and type it in the windows cal in dec mode
3. click hex. this will give you the exact 8 digit hex to put in your oscam.server.

Also,
I have tested the windows version of oscam which requires cygwin (using usb phoenix 6 mhz), and its too slow. Ecm transaction takes 1300ms compared to 300 ms on dm internal compared to 205 ms on ubuntu with usb phoenix running 6 mhz.

Gracias a jtc2005
 

juli13

Staff member
Administrator
Messages
10,194
[HOW TO] Update Oscam To The Last Version

I made this tutorial because many user ask how to update the oscam to the last version.

So is not nessesary to install allways an ipk softcam file.
After you install once an oscam via ipk install, you simply update the oscam bin file.

The tutorial show the procedure step by step including picture of the process.

Enjoy allways the last oscam.

This tutorial is made by juli13
 
Status
Not open for further replies.
Top