Adding a new satellite to DVB Dream.
- Thread starter dog-man
- Start date
TheHighLander
Super VIP
- Messages
- 4,144
Download and see...:thum:
Yes, I have tried the obvious but although the ini file is in the transponder folder it does not show at all anywhere in DVB Dream.
I assuming that 1.9E will be 0019?
OpenFox
VIP
- Messages
- 1,416
or every one can use this method, on my pic_screens, for addind ANY satellite in DVBDream
1.
[url=https://pixhost.org/show/34/60745348_1.png]
[/URL]
2.
[url=https://pixhost.org/show/34/60745377_2.png]
[/URL]
3.
[url=https://pixhost.org/show/34/60745397_3.png]
[/URL]
4.
[url=https://pixhost.org/show/34/60745421_4.png]
[/URL]
1.
[url=https://pixhost.org/show/34/60745348_1.png]
[/URL]2.
[url=https://pixhost.org/show/34/60745377_2.png]
[/URL]3.
[url=https://pixhost.org/show/34/60745397_3.png]
[/URL]4.
[url=https://pixhost.org/show/34/60745421_4.png]
[/URL]If you do not have the desired satellite file in the transponder folder,you can manually add it to this folder,by doing the following:
1.start Crazyscan and scan the satellite,
2.Save the dvbdream.ini file that was created from Crazyscan,and then,
3.Place it in the transponder folder in the DVBDream directory,
and then,
4.Select the satellite file in Options,diseqc,etc,as described by OpenFox above:
Here's an example.I chose Eutelsat 10E because it is at hand now to me:
1.start Crazyscan and scan the satellite,
2.Save the dvbdream.ini file that was created from Crazyscan,and then,
3.Place it in the transponder folder in the DVBDream directory,
and then,
4.Select the satellite file in Options,diseqc,etc,as described by OpenFox above:
Here's an example.I chose Eutelsat 10E because it is at hand now to me:
