Tvheadend + OscamEmu + Powervu

slim789

Registered
Messages
6
Hi all trying to view the SIS channels on 4.8e but keep getting a black screen with vlc.
I get the keys Auto Updating fine.
New keys get written to my softcam.key everyday, so the ecms should be fine.

Using the latest tvheadend, I have also tried astra cesbo with same result.
Using OSCam svn11.505 Emu -r791

Anyone have any clue on this? Or is tvheadend/ubuntu just not supported?
2019/03/20 20:55:25 2EF9A530 c (ecm) dvbapiau (0E00@000000/0000/0036/40:2CDCBF1A09C3C6C847C276EE858ED963): found (0 ms) by Reader-0 - WH 2
2019/03/20 20:55:26 2EF9A530 c (ecm) dvbapiau (0E00@000000/0000/0036/40:ED3806B792463C8E5B6A26A0C1F6AC40): found (1 ms) by Reader-0 - WH 2
2019/03/20 20:55:26 2EF9A530 c (ecm) dvbapiau (0E00@000000/0000/0036/40:DA0FA9BBEF54545A835237F36295CB64): found (1 ms) by Reader-0 - WH 2

Oscam.conf
[global]
logfile = stdout
nice = -1
waitforcards = 0
disablecrccws = 1
disablecrccws_only_for = 0E00:000000


[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
listen_port = 9000
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc

Oscam.server
[reader]
label = Reader-0
protocol = emu
device = Emulator
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 2,1,2,1
saveemm-u = 1
disablecrccws = 1
emu_auproviders = 0E00:000000
auprovid = 000E00
 

Rickk

Registered
Messages
2,375
from the oscam emu wiki

From Emu version r775 and on, you need to tell OSCam to skip the checksum test for CWs.
This can be done by either of the following ways:

A. Edit the Emu reader with one of these ways:

Delete you current Emu reader and let OSCam-Emu create a new one for you, with all necessary settings.
Add the 0E00:000000 string in the Skip CWs checksum test only for option under the general reader settings.
Add the disablecrccws_only_for = 0E00:000000 directive in the oscam.server file under the Emu reader section.

B. Edit the global OSCam configuration with one of these ways:

Add the 0E00:000000 string in the Skip CWs checksum test only for option under the global config settings.
Add the disablecrccws_only_for = 0E00:000000 directive in the oscam.conf file under the global section.
 

slim789

Registered
Messages
6
from the oscam emu wiki

Added that in and the same thing?
[global]
logfile = stdout
nice = -1
waitforcards = 0
disablecrccws = 1
disablecrccws_only_for = 0E00:000000

[cache]



[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
listen_port = 9000
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc

[reader]
label = Reader-0
protocol = emu
device = Emulator
disablecrccws_only_for = 0E00:000000
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 2,1,2,1
saveemm-u = 1
disablecrccws = 1
emu_auproviders = 0E00:000000
auprovid = 000E00
 

nautilus7

VIP
Messages
607
The red ones need to be removed...

Added that in and the same thing?
[global]
logfile = stdout
nice = -1
waitforcards = 0
disablecrccws = 1
disablecrccws_only_for = 0E00:000000

[cache]



[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
listen_port = 9000
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc

[reader]
label = Reader-0
protocol = emu
device = Emulator
disablecrccws_only_for = 0E00:000000
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 2,1,2,1
saveemm-u = 1
disablecrccws = 1
emu_auproviders = 0E00:000000
auprovid = 000E00

I am not sure they cause the problem though.

A log with all debug levels enabled is needed.
 
Last edited:

slim789

Registered
Messages
6
Ok removed
Oscam log
2019/03/21 16:41:07 00000000 s (main) System name = Linux
2019/03/21 16:41:07 00000000 s (main) Host name = svbl123
2019/03/21 16:41:07 00000000 s (main) Release = 3.13.0-165-generic
2019/03/21 16:41:07 00000000 s (main) Version = #215-Ubuntu SMP Wed Jan 16 11:46:47 UTC 2019
2019/03/21 16:41:07 00000000 s (main) Machine = x86_64
2019/03/21 16:41:07 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22290
2019/03/21 16:41:07 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2019/03/21 16:41:07 00000000 s (emu) OSCam-Emu version 791
2019/03/21 16:41:07 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2019/03/21 16:41:07 00000000 s (main) signal handling initialized
2019/03/21 16:41:07 00000000 s (config) 10 service-id's loaded in 0 ms
2019/03/21 16:41:07 00000000 s (net) newcamd: initialized (fd=4, port=3000)
2019/03/21 16:41:07 00000000 s (net) -> CAID: 0E00 PROVID: 000000
2019/03/21 16:41:07 00000000 s (reader) emulator [emu] creating thread for device emulator
2019/03/21 16:41:07 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2019/03/21 16:41:07 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2019/03/21 16:41:07 00000000 s (anticasc) anti cascading disabled
2019/03/21 16:41:07 6D3C9EFC r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2019/03/21 16:41:07 46D9A79B c (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2019/03/21 16:41:07 46D9A79B c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/03/21 16:41:07 46D9A79B c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2019/03/21 16:41:07 1CE6CBCC h (webif) webif: decompressed 172582 bytes back into 429720 bytes
2019/03/21 16:41:07 1CE6CBCC h (webif) HTTP Server running. ip=0.0.0.0 port=8881
2019/03/21 16:41:08 6D3C9EFC r (reader) emulator [emu] card detected
2019/03/21 16:41:08 46D9A79B c (dvbapi) Client connected: 'Tvheadend 4.2.8-21~g0c36205' (protocol version = 2)
2019/03/21 16:41:08 46D9A79B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1818 PROVID: 000000
2019/03/21 16:41:08 46D9A79B c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in caPMT
2019/03/21 16:41:08 46D9A79B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/03/21 16:41:08 46D9A79B c (dvbapi) Demuxer 0 continue decoding of SRVID 00A8
2019/03/21 16:41:08 46D9A79B c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in caPMT
2019/03/21 16:41:09 6D3C9EFC r (reader) emulator [emu] found card system emu
2019/03/21 16:41:09 6D3C9EFC r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2019/03/21 16:41:09 6D3C9EFC r (emu) Reading key file: /usr/local/etc/SoftCam.Key
2019/03/21 16:41:09 6D3C9EFC r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:166 D:0 T:0 A:0
2019/03/21 16:41:09 46D9A79B c (dvbapi) Demuxer 0 restarting decodingrequests after 501 ms with 1 enabled and 0 disabled ecmpids!
2019/03/21 16:41:09 46D9A79B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1818 ANY CHID PMTPID 1430 VPID 0064
2019/03/21 16:41:09 46D9A79B c (dvbapi) Demuxer 0 found 1 ECMpids and 4 STREAMpids in PMT
2019/03/21 16:41:36 1CE6CBCC h (webif) Refresh Readers requested by WebIF from 86.151.68.92
2019/03/21 16:41:37 6D3C9EFC r (emu) Reader is shutting down
2019/03/21 16:41:37 6D3C9EFC r (emu) Freeing keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:166 D:0 T:0 A:0
2019/03/21 16:41:38 1CE6CBCC h (config) readerdb 1 readers freed
2019/03/21 16:41:38 1CE6CBCC h (reader) emulator [emu] creating thread for device emulator
2019/03/21 16:41:38 4B806935 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2019/03/21 16:41:38 4B806935 r (reader) emulator [emu] card detected
2019/03/21 16:41:39 4B806935 r (reader) emulator [emu] found card system emu
2019/03/21 16:41:39 4B806935 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2019/03/21 16:41:39 4B806935 r (emu) Reading key file: /usr/local/etc/SoftCam.Key
2019/03/21 16:41:39 4B806935 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:166 D:0 T:0 A:0
2019/03/21 16:41:39 46D9A79B c (dvbapi) Demuxer 0 stop descrambling program number 00A8 (BETFRED SIS - CISCO 1)
2019/03/21 16:41:43 46D9A79B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 17A6 PROVID: 000000
2019/03/21 16:41:43 46D9A79B c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in caPMT
2019/03/21 16:41:43 46D9A79B c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2019/03/21 16:41:43 46D9A79B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17A6 ANY CHID PMTPID 13BE VPID 0384
2019/03/21 16:41:43 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:31B0136BF3B8DF567DDCFEC2ABA9566B): found (1 ms) by emulator - WH 2
2019/03/21 16:41:44 46D9A79B c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
2019/03/21 16:41:44 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:036E961BDF88E494632D3C1EB76902A9): found (0 ms) by emulator - WH 2
2019/03/21 16:41:45 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:D11C6E8FC198768D5CB72A3B5F211343): found (0 ms) by emulator - WH 2
2019/03/21 16:41:46 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:45310037A6354B6FE98493CB03F85F4D): found (0 ms) by emulator - WH 2
2019/03/21 16:41:47 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:A433331B0E55FF4A8B8ED72282BFDF08): found (0 ms) by emulator - WH 2
2019/03/21 16:41:48 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:5AC7F61DCFF13945DDA99E9AAB714955): found (0 ms) by emulator - WH 2
2019/03/21 16:41:48 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:A7101D617127C8FF745EEBB5CC98C42F): found (1 ms) by emulator - WH 2
2019/03/21 16:41:49 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:75A6AF5B2AB8B52926D103A9B03ED172): found (1 ms) by emulator - WH 2
2019/03/21 16:41:50 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:1507EE51E3A1788683D672D6DE8B901D): found (1 ms) by emulator - WH 2
2019/03/21 16:41:51 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:A52EC2ECE90439DD132C4AE0237B39C9): found (1 ms) by emulator - WH 2
2019/03/21 16:41:51 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:B7ED70A7DF67264F57759CEE3F30DE2E): found (0 ms) by emulator - WH 2
2019/03/21 16:41:52 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:E3C6F25D1652A5E46272F76FF250C271): found (0 ms) by emulator - WH 2
2019/03/21 16:41:53 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:32FD10FD9B59579ADF4B1D1F019346B9): found (0 ms) by emulator - WH 2
2019/03/21 16:41:54 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:1655DF3F6EF23CFF1C9E28014B06F642): found (0 ms) by emulator - WH 2
2019/03/21 16:41:55 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:9CFA6E390F79CF965E64584767AD6028): found (1 ms) by emulator - WH 2
2019/03/21 16:41:56 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:BE46D226C23C7EA1EBFC0CA05949CBBA): found (0 ms) by emulator - WH 2
2019/03/21 16:41:56 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:D7368CB62942926369F5706529A2DAFD): found (0 ms) by emulator - WH 2
2019/03/21 16:41:57 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:3AC26F6E7E1D89A5AECA8100DE2CC2BB): found (0 ms) by emulator - WH 2
2019/03/21 16:41:58 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:0D6577FE4DD749DBAE270A317CFA65A5): found (0 ms) by emulator - WH 2
2019/03/21 16:41:59 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:12C7C150AD45A9A3EAF66918A9C52B52): found (1 ms) by emulator - WH 2
2019/03/21 16:42:00 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:02011425D93B48BFAB56742EDF5B3E25): found (1 ms) by emulator - WH 2
2019/03/21 16:42:00 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:0D1EECF0452C664C787B31518FCC54BF): found (1 ms) by emulator - WH 2
2019/03/21 16:42:01 46D9A79B c (ecm) dvbapiau (0E00@000000/0000/0036/40:C26367FD4E4BE009070F5D814CE19AC5): found (0 ms) by emulator - WH 2
 

cimbom28

Registered
Messages
8
this will be the case in your config settings.

oscam.conf

[dvbapi]
enabled = 1
extended_cw_api = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 1
user = visor
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox

extended_cw_api varies according to device 1 or 2 will be made in the dm500 hd 2 vudo 1

oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0E00,0604,0500
detect = cd
group = 1
emmcache = 2,2,2,0
saveemm-u = 1
emu_auproviders = 0E00:000000

oscam.user

[account]
user = visor
pwd = visor
keepalive = 1
au = 1
group = 1

Powervu okey In this way I have no problem
 

slim789

Registered
Messages
6
this will be the case in your config settings.

oscam.conf

[dvbapi]
enabled = 1
extended_cw_api = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 1
user = visor
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox

extended_cw_api varies according to device 1 or 2 will be made in the dm500 hd 2 vudo 1

oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0E00,0604,0500
detect = cd
group = 1
emmcache = 2,2,2,0
saveemm-u = 1
emu_auproviders = 0E00:000000

oscam.user

[account]
user = visor
pwd = visor
keepalive = 1
au = 1
group = 1

Powervu okey In this way I have no problem

Im not using a receiver though i am using ubuntu/tvheadend.
So not sure this will work?

edited tried these settings from dreambox to
boxtype = pc-nodmx
 
Last edited:

cimbom28

Registered
Messages
8
Im not using a receiver though i am using ubuntu/tvheadend.
So not sure this will work?

edited tried these settings from dreambox to
boxtype = pc-nodmx

[dvbapi]
enabled = 1
pmt_mode = 6
user = anonymous
boxtype = pc-nodmx
 

slim789

Registered
Messages
6
Now I receive
2019/03/21 19:43:24 46D9A79B c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
2019/03/21 19:43:24 46D9A79B c (dvbapi) socket connect error (errno=2 No such file or directory)
 
Top