openbox x5 boot problem

openbox x5 boot problem
i have openbox x5 but i have problem in booting it cant start up
im trying to boot by usb port but it give me open failed massege

plz i need ur help to solve this problem

Try recover it to original firmware

1. Should you format the usb to fat32.
2. The file name should be changed to "KD_P9000E_HD".
The name is different, and will receive a "fail" message.
3. Satellite receiver, you must wait until the cold

Thanks its works for me

jlquintanilla said:

Thanks its works for me

Click to expand...

hello.

i have the same prob and when i try to load firmware i get fail messeage. which firmware did u use and how you did it please can u explain to me.

thank you.

shakyA23 said:

hello.

i have the same prob and when i try to load firmware i get fail messeage. which firmware did u use and how you did it please can u explain to me.

thank you.

Click to expand...

firmware file must be located directly on the memory stick, not a folder

HELLO. JAKITAKI.
I PLACED FIRMWARE ON MEM STICK KD_P9OOOE_HD BIN FILE. THEN I PWER RECIVER N PRESS POWER BUTON WHEN SHOWS LOAD I RELEASE AND I GET MESSEAGE FAIL.PLEASE ANY SUGGESTION.

THANK YOU.

JAKITAKI said:

firmware file must be located directly on the memory stick, not a folder

Click to expand...

CAN U SUGEST WHICH FIRMWARE TO USE.

Openbox x5 dead

Whenever i try to boot my openbox x5 from usb it load up 100% and say check Error . Try again im i doing something wrong ? Please i need help.