Smart MX04 HDCA mit USB und RAPS

Features des ALi M3602

    Embedded high performance CPU
     Support DDR SDRAM
     Support serial / parallel flash
     DVB-CSA de-scrambler supported
     CI interfaces supported
     Smart card interfaces
     MPEG-2 MP @ HL video decoder
     H.264 video decoder [email protected]
     JPEG decoding accelerator
     Build-in DVI and HDMI
     USB host interface
     Parallel ATA interface for hard-disk devices
     Power down control

The receiver's automatic programming system RAPS received this year's "PLUS X AWARD" for outstanding ease of use. 
Technical Data Smart MX04 HDCA:

- HDMI Output
- 5000 TV and radio channels
- DiSEqC Support
- Pre-programmed Astra, Hotbird, Türksat
- 8 favorite lists
- USB interface
- Digital Audio Output: coax
- Scart connection
- Accessories: Remote control, batteries, manual
- Dimensions (WxHxD): 260 x 50 x 220 mm

Specifications:
LNB and Tuner input
F female to IEC 169-24
Frequency Range 950 MHz ~ 2150 MHz
Input level range -65 dBm to -25 dBm
LNB power supply 13/18V, max. 400 mA
LNB-Control signal 22 kHz, 0 / 12 V
DiSEqC Control DiSEq full support

Demodulator
Front-end module, QPSK, 8PSK
Input data rate of 2 MS / s to 90 MS / s

System Resources
333 MHz processor
SDRAM 2PCS 32 × 16Mbit/64Mbyte DDRs
FLASH 1PC 16MBit/2MByte

Video Decoder
Video Resolution (Video Format) 1920 x 1080 1280 x 720, 720 x 480
Aspect Ratio 4:3, 16:9

Remote Control
Range up to 7 m
2x AAA batteries

PSU
Power consumption max. 30 W
Standby power consumption below 1 W

[COLOR="Red"]RAPS
[/COLOR]
PLUS X AWARD

The Automatic Receiver Programming System RAPS was established in May 2009 with the prestigious Plus X Award. The prize went to the system for its ease of use. 

RAPS is the ultimate programming system for your digital satellite receiver, after a short preset, you can forget everything else.