Possible to have 4/1 with 7w 13e 19.2e and 28.2e ?

meho7

Registered
Messages
318
Hey guys
I need some advice
Is it possible to have 7w sat position with 13e,19,2e & 28.2e??
Currently I have 13e,19.2e,23.2e & 28.2e on a 1m dish, my location is south central Europe. I would change the 23.2e with 7w

thanks for all the future answers

cheers :)
 

skyscan

Registered
Messages
36
If you got a strong signal, it might be possible.

Not sure though if it'll work with a standard 1m dish, as the signal could be out of reach/focus with your range of 35 degrees from 28.2E to 7°W
 

csell

Registered
Messages
120
Hey guys
I need some advice
Is it possible to have 7w sat position with 13e,19,2e & 28.2e??
Currently I have 13e,19.2e,23.2e & 28.2e on a 1m dish, my location is south central Europe. I would change the 23.2e with 7w

thanks for all the future answers

cheers :)

Hi Meho7.

It will depend on your LNB multi holder.

I am using a Triax TD MULTIBLOCK from ebay.co.uk
It gives up to 20 degree span on a 80cm, 100cm or 110cm dishes.

I suceeded to get 19.2E 13.0E 7.0E 1.0W and 7.0W on a 75 cm dish in southeast Spain.

But I don't belive you can get 35 degrees span on a normal dish.

For 35 degree you will need a Toroidal T90 or two separate dishes.

Regards Carsten.
 
Top