Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

EnoSat

Senior Member
Messages
1,978
Point of the situation.

1-installed a new image OPENATV 6.1
2-installed Oscam EMU oscam-1.20_svn-r11438 with reader
3-I uploaded via FTP from the Astra folder (Albertis)
4-I executed the command (ssh) opkg install astra-sm
5-reconfigured the astra.conf file in the box
6-I added with Dreamboxedit the bouquet albertis

canals albertis... just a black screen.

What am I doing wrong?

BISS key
 

rom20051

Registered
Messages
73
Point of the situation.

1-installed a new image OPENATV 6.1
2-installed Oscam EMU oscam-1.20_svn-r11438 with reader
3-I uploaded via FTP from the Astra folder (Albertis)
4-I executed the command (ssh) opkg install astra-sm
5-reconfigured the astra.conf file in the box
6-I added with Dreamboxedit the bouquet albertis

canals albertis... just a black screen.

What am I doing wrong?

And edit lame.db and upload it to the box in stopped enigma, not through DreamboxEdit.
 

escu29

Registered
Messages
5
Hello, I followed the manual to the letter in my vu + last 4k and all black ... could someone send me a copy for the last 4k greetings from Spain
 

00007

Registered
Messages
8
Do you know any solution for the sound in Vu + zero 4k after upgrading to the openATV 6.2 version?
Thank you
 

00007

Registered
Messages
8
Do you know any solution for the sound in Vu + zero 4k after upgrading to the openATV 6.2 version?
Thank you
 

00007

Registered
Messages
8
Do you know any solution for the sound in Vu + zero 4k after upgrading to the openATV 6.2 version?
Thank you
 

BobRX

Registered
Donating Member
Messages
21
I'm having big trouble getting it to run on a DM820HD (Mipsel) with OpenATV 6.1... Picture drops after 5-10 seconds, only the autonomicas with low bitrate run without interruption.

Seems as if the abertis script for astra-sm either crashes or cannot cope with the higher data rate of the HD and other SD channels (log says 'dropped x packets while waiting for child'). Reception is fine, >13dB.
 
Last edited:

pipino

Registered
Messages
205
I'm having big trouble getting it to run on a DM820HD (Mipsel) with OpenATV 6.1... Picture drops after 5-10 seconds, only the autonomicas with low bitrate run without interruption.

Seems as if the abertis script for astra-sm either crashes or cannot cope with the higher data rate of the HD and other SD channels (log says 'dropped x packets while waiting for child'). Reception is fine, >13dB.

may be its a RAM issues in your box
 

BobRX

Registered
Donating Member
Messages
21
A typical log would look like this (works for 5 or so seconds then stops):

Code:
Nov  5 23:10:56 dm820 user.warn kernel: [31258.608000] audio ch0: lock
Nov  5 23:10:56 dm820 user.warn kernel: [31258.608000] audio ch0: sample rate changed isr (48000)
Nov  5 23:10:56 dm820 user.warn kernel: [31258.608000] audio ch0: adjusting GA threshold to: 36ms
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: pnr: 1703
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: pid: 8191 PCR
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: CAS: caid: 0x2600 pid: 8191
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: Service: HSA-65U3
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: Provider: HSA-65U
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] DATA: pid: 703 type: User private (0x90)
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] DATA: descriptor: 0xFB06000900000000
Nov  5 23:10:56 dm820 user.info astra[631]: [Abertis PID 703 #1] PMT: crc32: 0x347205E4
Nov  5 23:10:56 dm820 user.err astra[631]: [Abertis PID 703 #1] Bitrate:21071Kbit/s PES:0 CC:3
Nov  5 23:10:57 dm820 user.warn kernel: [31259.218000] audio ch0: status ready isr
Nov  5 23:10:57 dm820 user.warn kernel: [31259.427000] VIDEO0: first pts 0x1b12a6f58
Nov  5 23:10:57 dm820 user.warn kernel: [31259.577000] VIDEO0: enable tsm
Nov  5 23:10:57 dm820 user.err astra[631]: [Abertis PID 703 #1] Bitrate:20021Kbit/s PES:0 CC:0
Nov  5 23:10:58 dm820 user.err astra[631]: [Abertis PID 703 #1] Bitrate:21561Kbit/s PES:0 CC:0
Nov  5 23:10:58 dm820 user.err astra[631]: [Abertis PID 703] Failed to switch to reserve
Nov  5 23:11:00 dm820 user.warn kernel: [31262.517000] rtc set to 1541455856
Nov  5 23:11:00 dm820 user.warn kernel: [31262.519000] rtc set to valid now
Nov  5 23:11:04 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 388 packets while waiting for child
Nov  5 23:11:05 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 187 packets while waiting for child
Nov  5 23:11:09 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 231 packets while waiting for child
Nov  5 23:11:11 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 563 packets while waiting for child
Nov  5 23:11:11 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 267 packets while waiting for child
Nov  5 23:11:16 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 639 packets while waiting for child
Nov  5 23:11:23 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 555 packets while waiting for child
Nov  5 23:11:27 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 211 packets while waiting for child
Nov  5 23:11:28 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 187 packets while waiting for child
Nov  5 23:11:30 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 235 packets while waiting for child
Nov  5 23:11:33 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 183 packets while waiting for child
Nov  5 23:11:35 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 563 packets while waiting for child

After a while it works again for up to 10 seconds, log:
Code:
Nov  5 23:12:34 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 983 packets while waiting for child
Nov  5 23:12:39 dm820 user.debug astra[631]: [child/pipe_xfrm Abertis PID 703 #1] stderr pipe got closed on far side
Nov  5 23:12:39 dm820 user.debug astra[631]: [child/pipe_xfrm Abertis PID 703 #1] caught signal 11 (Segmentation fault)
Nov  5 23:12:39 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] process exited with code 139; restarting in 5 seconds
Nov  5 23:12:44 dm820 user.debug astra[631]: [pipe_xfrm Abertis PID 703 #1] attempting restart...
Nov  5 23:12:44 dm820 user.debug astra[631]: [child/pipe_xfrm Abertis PID 703 #1] attempting to execute `/etc/astra/scripts/abertis 703'
Nov  5 23:12:44 dm820 user.info astra[631]: [pipe_xfrm Abertis PID 703 #1] process started (pid = 8786)
Nov  5 23:12:44 dm820 user.err astra[631]: [pipe_xfrm Abertis PID 703 #1] dropped 67584 packets while waiting for child

Segfault and code 139... on the autonomicas it works flawlessly.

The process
/etc/astra/scripts/abertis 703
gets a new PID every couple of seconds, so obviously it crashes and gets restarted all the time.

The box has
- 7.000 MIPS Dual Core Processor
- 4 GB Flash
- 2 GB RAM
Specs sound ok?

Memory use doesn't seem to be the problem as far as I can tell:
Code:
root@dm820:~# pmap -d 10231
10231:   /etc/astra/scripts/abertis 703
Address   Kbytes Mode  Offset           Device    Mapping
00400000       4 r-x-- 0000000000000000 0b3:00001 abertis
00410000       4 rw--- 0000000000000000 0b3:00001 abertis
00bd8000     132 rwx-- 0000000000000000 000:00000   [ anon ]
76e84000    1288 r-x-- 0000000000000000 0b3:00001 libc-2.25.so
76fc6000      64 ----- 0000000000142000 0b3:00001 libc-2.25.so
76fd6000      12 r---- 0000000000142000 0b3:00001 libc-2.25.so
76fd9000      12 rw--- 0000000000145000 0b3:00001 libc-2.25.so
76fdc000       8 rw--- 0000000000000000 000:00000   [ anon ]
76fde000     128 r-x-- 0000000000000000 0b3:00001 ld-2.25.so
7700b000       8 rw--- 0000000000000000 000:00000   [ anon ]
7700d000       4 r---- 000000000001f000 0b3:00001 ld-2.25.so
7700e000       4 rw--- 0000000000020000 0b3:00001 ld-2.25.so
7ff40000     132 rwx-- 0000000000000000 000:00000   [ stack ]
7ffff000       4 r-x-- 0000000000000000 000:00000   [ anon ]
mapped: 1804K    writeable/private: 300K    shared: 0K

Is the code of the abertis executable available anywhere?
 
Last edited:

007.4

VIP
Messages
364
Try this:
_https://cesbo.com/wiki/linux/network_tuning

Brilliant! :)
That fixed the pixellation/freezing on my ARM based Ultimo4K. :)

I edited the file /etc/sysctl.conf to add these lines
Code:
## added for Abertis ###
net.core.rmem_default = 16777216
net.core.rmem_max = 16777216
net.core.wmem_default = 16777216
net.core.wmem_max = 16777216
net.ipv4.udp_mem = 8388608 12582912 16777216
net.ipv4.tcp_rmem = 4096 87380 8388608
net.ipv4.tcp_wmem = 4096 65536 8388608
net.ipv4.tcp_tw_recycle = 0

Then in telnet, to apply the changes I ran
Code:
sysctl -p

After a short period of stabalization the picture is now perfect.
 
Last edited:

BobRX

Registered
Donating Member
Messages
21
007.4 said:
xosef1234 said:
Try this:
_https://cesbo.com/wiki/linux/network_tuning

Brilliant!
That fixed the pixellation/freezing on my ARM based Ultimo4K.

Same here! It works after applying these changes on my DM820 with OpenATV6.1! Thank you so much @xosef1234 (and @007.4)!
:) :thum:
 
Last edited:
Top