How to use SBCL/VPLUG with a Dreambox

Status
Not open for further replies.

vamos

Registered
Messages
359
remember

also
go to france4 , if not work, restart emu CCcam2.0.9 or Mgcamd130d
and go other channel of Tps or Absat 13°

no insert CAM , and SoftCam.Keys not rk. whit V 007C00.....
============== =====================

bye
 

largepint

Registered
Messages
4
hm , i get picture for about 50 seconds.. and then it becomes black again , even if i try this on different cams.. still the same :S .. anyone having same problems?
 

dtbois

Registered
Messages
33
Try changing your ECM_Filter_Timeout_Sec in your vPlug.ini settings. Mine is set to 40 as I also had similar problems.

You can do this either in vPlug program by clicking on Preferences (looks like a gold cog!)or in the vPlug.ini file in your plugin folders.
 
Last edited:

MyB5

Registered
Messages
99
Same here, I don't understand what's wrong...:mad:
I get this:

13:24:37: Connecting IP 192.168.1.101 to TunerTCP
13:24:37: TCP Ncd RX: 004000006D67FF60CEE97411E00028726F6F7400243124616263646566676824575131775A5A534C74772E722F423066576A3668773000CD7CAA
13:24:37: TCP Login accepted
13:24:37: TCP Ncd TX: 000000000000000000000000E10000
13:24:37: TCP Ncd RX: 001800000000000000000000E30000FB1E06
13:24:37: TCP Sending Card Info
13:24:37: TCP Ncd TX: 000000000000000000000000E4002300010000000000062CE932020000650000000000000000000068000000000000000000
13:25:32: [1] Filter 0 detached.
13:25:35: [1] Filter 0 active - PID: 255.
13:25:35: [1] Filter 1 active - PID: 1.
13:25:47: [1] Filter 0 detached.
13:25:47: [1] Filter 1 detached.
13:25:49: [1] Filter 0 active - PID: 255.
13:26:29: [1] Filter 0 detached.
13:26:29: [1] Filter 0 active - PID: 255.
13:26:29: [1] Filter 1 active - PID: 255.
13:26:32: [1] Filter 1 detached.

Plz help...:thum:
 

surv55

Registered
Messages
2
I have the same problem as the last post
Have set up as instructions but there is no traffic in the raw ecm stream. is there anyone who is willing to point out obvious mistakes I might have made?

18:38:25: Connecting IP 192.168.1.75 to TunerTCP
18:38:25: TCP Ncd RX: 004000004343000000000000E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E70726830003E826B
18:38:25: TCP Login accepted
18:38:25: TCP Ncd TX: 000000000000000000000000E10000
18:38:25: TCP Ncd RX: 001800000000000000000000E300006BD35B
18:38:25: TCP Sending Card Info
18:38:25: TCP Ncd TX: 000000000000000000000000E4002300010000000000062CE932020000650000000000000000000068000000000000000000
18:38:57: [1] Filter 0 active - PID: 20.
18:38:57: [1] Filter 1 active - PID: 255.
18:38:57: [1] Filter 2 active - PID: 1.

Date - Message -
[16/08/2008 18:38:16] SBCL v1.1b: - Timeout on ECM-PID: $0000
[16/08/2008 18:38:16] SBCL v1.1b: - ECM filter has been stoped...
[16/08/2008 18:38:16] SBCL v1.1b: - No. of keys in v_keys.db: 522
[16/08/2008 18:38:16] SBCL v1.1b: - No. of rows in v_sids.db: 861
[16/08/2008 18:38:16] SBCL v1.1b: - SBCL v1.1b.exe - vPlug2.1.4
[16/08/2008 18:38:16] SBCL v1.1b: - vPlug's location: C:\SBCL\Plugins\
[16/08/2008 18:38:16] SBCL v1.1b: - Working dir: C:\SBCL\Plugins\
[16/08/2008 18:38:16] SBCL v1.1b: - MD-API Version 01.03 - 1.06 [MD-API]
[16/08/2008 18:38:57] SBCL v1.1b:SBCL - tp_id=$0000, SID=$0000, PMT=$0000
[16/08/2008 18:38:57] SBCL v1.1b:SBCL - ECM from SidCache: $00FF
[16/08/2008 18:38:57] SBCL v1.1b:SBCL - StartECM_Filt-> $00FF
[16/08/2008 18:38:57] SBCL v1.1b:SBCL - Added PMT filter, pid=$0000
[16/08/2008 18:40:57] SBCL v1.1b:SBCL - Timeout on ECM-PID: $00FF
[16/08/2008 18:40:57] SBCL v1.1b:SBCL - -> empty pid -> starting AutoECM...
[16/08/2008 18:40:58] SBCL v1.1b:SBCL - StartECM_Filt-> $00FF
 

surv55

Registered
Messages
2
well I have kept trying and have found that sbcl v1.1b wont work for me however v1.0i does at least it gives the ecm streams
has anyone had any problems with v1.1b ?
 

vegeku90

Registered
Messages
1,586
mm...i have not founded it..can you upload sbcl 1.1b in public sat upload for testing?

anyway v1.0i works well
 

palladilardo

Registered
Messages
8
I'am using sbcl 1.1b with vplug 2.3.7, but there is no communication between sbcl and vplug. Only for some ab*at channels there is the raw ecm steram but no vision. For all t*s channel nothing. How can I solve ?
Thank you
 

tintinetmilou

Registered
Messages
16
Still working ???

I just got a brand bew DM7020 and tried to use SBLC/vplug with CCcam2.0.9 but cannot make it working at the moment with latest TPS.bin

Tried to follow all the advices in this thread.

So cannot figure out if this is a config problem either on DM side or PC side or if it's not working any more ?

For the timezone, does 0:2:+ means GMT+2 in vplug.ini?

What about when we'll switch to winter time (will fall back to GMT+1) ?
 

slee1004

Registered
Messages
1
sbcl + with dreambox

Anyone tried?
I have D500 and mytheatre runing on pc.
sox.Key AutoRoll.key is on share folder can be seen from D500.
tried sbcl but no luck.
 

wsky

Registered
Messages
4
who can help me?THX....
22:06:21: [1] Connecting...
22:06:21: [1] Connected with Newcamd CardServer
22:06:21: Reject connection from IP 192.168.11.151 to TunerTCP
22:06:21: Disconnecting IP 192.168.11.151 from TunerTCP
22:06:21: [1] Sending login and password
22:06:21: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:06:21: [1] Disconnected
22:06:49: [1] Restarting connection first time (next in 30 sec.)
22:06:49: [1] Connecting...
22:06:49: Reject connection from IP 192.168.11.151 to TunerTCP
22:06:49: Disconnecting IP 192.168.11.151 from TunerTCP
22:06:49: [1] Connected with Newcamd CardServer
22:06:49: [1] Sending login and password
22:06:49: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:06:50: [1] Disconnected
22:07:19: [1] Restarting connection second time (next in 30 sec.)
22:07:19: [1] Connecting...
22:07:19: [1] Connected with Newcamd CardServer
22:07:19: Reject connection from IP 192.168.11.151 to TunerTCP
22:07:19: Disconnecting IP 192.168.11.151 from TunerTCP
22:07:19: [1] Sending login and password
22:07:19: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:07:19: [1] Disconnected
22:07:49: [1] Restarting connection third time (next in 30 sec.)
22:07:49: [1] Connecting...
22:07:49: [1] Connected with Newcamd CardServer
22:07:50: Reject connection from IP 192.168.11.151 to TunerTCP
22:07:50: Disconnecting IP 192.168.11.151 from TunerTCP
22:07:50: [1] Sending login and password
22:07:50: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:07:50: [1] Disconnected
22:08:19: [1] Restarting connection 4 time (next in 30 sec.)
22:08:19: [1] Connecting...
22:08:19: Reject connection from IP 192.168.11.151 to TunerTCP
22:08:19: Disconnecting IP 192.168.11.151 from TunerTCP
22:08:19: [1] Connected with Newcamd CardServer
22:08:19: [1] Sending login and password
22:08:19: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:08:19: [1] Disconnected
22:08:49: [1] Restarting connection 5 time (next in 30 sec.)
22:08:49: [1] Connecting...
22:08:49: Reject connection from IP 192.168.11.151 to TunerTCP
22:08:49: Disconnecting IP 192.168.11.151 from TunerTCP
22:08:49: [1] Connected with Newcamd CardServer
22:08:49: [1] Sending login and password
22:08:49: [1] Ncd TX: 000000005342000000000108E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E7072683000
22:08:49: [1] Disconnected
 
Status
Not open for further replies.
Top