- Messages
- 17,767
3p1 FLASHIMAGE 1730-MINI FÜR UFS-910!!!"
Windoze USER FOR THE NO FLASH IN THE MINI-SUBMARINE HAVE ONLY flashable WITH THE FLASH SUITE 1.2.8
(possibly also with older Flash ner Suite version, but without guarantee!)
WHAT IS EVO-MINI:
THEREIN IS THE SO-CALLED BY MINIUBOOT "solala (FAT THX AGAIN) INCLUDED!
SO IT IS POSSIBLE VIA RC BOAT ON HIS IMG CHOOSE WHAT IS STARTING TO, WHETHER FLASH, USB OR NFS!
THIS SHOULD BE MADE ONLY IN THE bootargs FLASHUITE IN 3P1MINI.TXT ADJUST AND THE EVO *. IMG DEPOSITED IN FLASH SUITE FOLDER.
THERE ARE POSSIBLE ENTRIES FROM 0-9! (GO TO CONFORM. TXT FILE)
THEREIN BEFORE BOOTARGSÜBERTRAG AND ONLY VERY UP YOUR IP, GW, ServerIP, NETMASK
ADAPTED FROM YOU ARE ALREADY CAN Flash and ARGS TRANSFERRED, AND EVEN THEN it boots DIRECTLY FROM WHERE TO FLASH VIA JICH RC CHOOSES WHAT ELSE! Bootargs EXTENSIONS FOR EITHER THE EVO IMG FW_SETENV STOP THE USE OR TXT MODIFY AND AGAIN TRANSFERRED.
OBIS INSTRUCTIONS FOR VARIOUS WAYS TO FIND UNDER "INSTRUCTIONS"
new in mini1.2-final:
emerg is back, it can now flash if the mini is back to normal from usb flash stick.
give you more information in the download thread to the mini-1.2-final here and here
who is already a mini-evo-img in flash can also have the mini-1.2-final preliminary "flash" to flash then the evo-mini-1730.img as in the mini-thread explains via usb-stick to then!
it simply an old evo-mini can (eg boot 1501) and the copy miniUPDATE.img by means of ftp / tmp ufs, but kill only after
Now after mini tmp directory via ftp and then:
at evo images:
aaf images at:
HOW IS THE ONLY IF YOU ALREADY TOLD DE EVO IMG WITH MINI IN reflashing Did!
then after that is also here:
new structural and constructive!
var / etc is mounted on boot after / etc. rw in it and everything is so can be processed!
usr/lib/enigma2/python was transferred into the var!
var usr + rw are thus freely editable!
usr is nich but completely rw / usr/lib/eniga2/python all of which contain important what one wants to change or supplement to hire ma! However, as always, with all applicable:
paperboard moving up too full or it might burst and not boot Thereby. always with df-h and see how much space is still available and always a free pad of mind 150kb left (must have e2 !!!).
Just for swapfile on usb-stick/hdd a folder called: Creating a swap put on swapfile, off, on, done. telnet: Free should now show when swap not 0 more! Alternatively, use swappart (recommended!)
epg for saving on stick / hdd, then a folder: epg create and put it on usb / hdd epg save the setup!
for the record, ts, etc., as usual folder on the media partition (sda5 create):
mp3 -> corresponds to bind to / hdd / music
Record -> corresponds to bind to / hdd / movies
pictures -> corresponds to bind to / hdd / pictures
timeshift -> corresponds to bind to / hdd / timeshift
own_movies -> corresponds to bind to / hdd / own_movies
epg -> corresponds to bind to / epg
swap -> corresponds to bind to / swap
Windoze USER FOR THE NO FLASH IN THE MINI-SUBMARINE HAVE ONLY flashable WITH THE FLASH SUITE 1.2.8
(possibly also with older Flash ner Suite version, but without guarantee!)
WHAT IS EVO-MINI:
THEREIN IS THE SO-CALLED BY MINIUBOOT "solala (FAT THX AGAIN) INCLUDED!
SO IT IS POSSIBLE VIA RC BOAT ON HIS IMG CHOOSE WHAT IS STARTING TO, WHETHER FLASH, USB OR NFS!
THIS SHOULD BE MADE ONLY IN THE bootargs FLASHUITE IN 3P1MINI.TXT ADJUST AND THE EVO *. IMG DEPOSITED IN FLASH SUITE FOLDER.
THERE ARE POSSIBLE ENTRIES FROM 0-9! (GO TO CONFORM. TXT FILE)
THEREIN BEFORE BOOTARGSÜBERTRAG AND ONLY VERY UP YOUR IP, GW, ServerIP, NETMASK
ADAPTED FROM YOU ARE ALREADY CAN Flash and ARGS TRANSFERRED, AND EVEN THEN it boots DIRECTLY FROM WHERE TO FLASH VIA JICH RC CHOOSES WHAT ELSE! Bootargs EXTENSIONS FOR EITHER THE EVO IMG FW_SETENV STOP THE USE OR TXT MODIFY AND AGAIN TRANSFERRED.
OBIS INSTRUCTIONS FOR VARIOUS WAYS TO FIND UNDER "INSTRUCTIONS"
new in mini1.2-final:
emerg is back, it can now flash if the mini is back to normal from usb flash stick.
give you more information in the download thread to the mini-1.2-final here and here
who is already a mini-evo-img in flash can also have the mini-1.2-final preliminary "flash" to flash then the evo-mini-1730.img as in the mini-thread explains via usb-stick to then!
it simply an old evo-mini can (eg boot 1501) and the copy miniUPDATE.img by means of ftp / tmp ufs, but kill only after
Now after mini tmp directory via ftp and then:
at evo images:
aaf images at:
HOW IS THE ONLY IF YOU ALREADY TOLD DE EVO IMG WITH MINI IN reflashing Did!
then after that is also here:
new structural and constructive!
var / etc is mounted on boot after / etc. rw in it and everything is so can be processed!
usr/lib/enigma2/python was transferred into the var!
var usr + rw are thus freely editable!
usr is nich but completely rw / usr/lib/eniga2/python all of which contain important what one wants to change or supplement to hire ma! However, as always, with all applicable:
paperboard moving up too full or it might burst and not boot Thereby. always with df-h and see how much space is still available and always a free pad of mind 150kb left (must have e2 !!!).
Just for swapfile on usb-stick/hdd a folder called: Creating a swap put on swapfile, off, on, done. telnet: Free should now show when swap not 0 more! Alternatively, use swappart (recommended!)
epg for saving on stick / hdd, then a folder: epg create and put it on usb / hdd epg save the setup!
for the record, ts, etc., as usual folder on the media partition (sda5 create):
mp3 -> corresponds to bind to / hdd / music
Record -> corresponds to bind to / hdd / movies
pictures -> corresponds to bind to / hdd / pictures
timeshift -> corresponds to bind to / hdd / timeshift
own_movies -> corresponds to bind to / hdd / own_movies
epg -> corresponds to bind to / epg
swap -> corresponds to bind to / swap