Vu Solo2 Usals problem

rapahifi

Registered
Messages
30
Hi Guys just flashed out my Vu solo 2 with blackhole 2.1.1 version but the Usals on the motor is not working the settings are set on

Simple
Positioner
Longitude
Latitude

Anyway everything is set as suppose but the motor is not turning anywhere what's the problem ? i've just update to a new channel list of VHANNIBAL 22 oct still no difference ! Help me out !!!:(
 

RIDER

"Vanity is definitely my favorite sin"
Super VIP
Messages
7,849
check the input from dish on reciever see if its TUNER A OR TUNER B then set again on the other try to use example B moreover check the loop from lnb to the motor see that you got enough eart in the wire not corrowtion
 

rapahifi

Registered
Messages
30
The problem was that you cant Set both tuners together unless its a loop just discovered it by mistake .. if tuner A is set on Something the other one shouldn't be configured
 

blitzkrieg

Registered
Messages
14
i have had the same problem, the only solution for me was to install an older open atv image (from 27.09.) or an vti image (whichever)....bye
 
Top