Optibox chat!!! All disscusions here

sorin8m

Registered
Messages
19
Thanks Janicar and gigibamse for help. One was start but not have command from procesor for 22khz and second is death, not want to start.

Zahvaljujem se janicaru i gigibamse za pomoc. Jedan risiver se pokrenuo medjutim nedobija iz procesora komandu za 22khz a drugi je mrtav nece da se pokrene.

Multumesc lui Janicar si gigibamse pentru ajutor. Un receptor am rausit sal pornesc insa are probleme cu 22kHz, comanda din procesor iar al doilea e mort de tot, nu porneste deloc.
 

sorin8m

Registered
Messages
19
error-01 on optibox plus FTA

Hello, I back again with other problem. I have now one optibox plus FTA with error-01 on disply. I try to put softwer 1.17.44, he write softwer (with RS232 cable) and on the end when he reboot again apear error-01.
WHat to do?

Pozdrav, evo ja opet sa problemom. Imam jedan risiver optibox plus FTA koji na dipleju ima error-01. Probao sam mu staviti softwer 1.17.44, on upise softwer, sprzi je sve ok do kraja, kada se resetuje na kraju opet se pojavi erroe-01 na displeju. Bilo koji softwer da ubacim isto se desava. Sta da mu radim?
 

csirkecsecs

Registered
Messages
1
Hi . Try again whit the 1.17.67 sw . Only whit RS232 cable . Good Luck .

Hello, I back again with other problem. I have now one optibox plus FTA with error-01 on disply. I try to put softwer 1.17.44, he write softwer (with RS232 cable) and on the end when he reboot again apear error-01.
WHat to do?

Pozdrav, evo ja opet sa problemom. Imam jedan risiver optibox plus FTA koji na dipleju ima error-01. Probao sam mu staviti softwer 1.17.44, on upise softwer, sprzi je sve ok do kraja, kada se resetuje na kraju opet se pojavi erroe-01 na displeju. Bilo koji softwer da ubacim isto se desava. Sta da mu radim?
 

sorin8m

Registered
Messages
19
I try all version of softwer, but nothing not help.
Maybe if somenone send me some softwer with boot to try. Else I don't know what to do.
 

Cryptor68

Registered
Messages
1
Hi janicar
thx for all, are they any new ke+s for the Opticum Optibox HD 2CICX PVR Ready out ? The latest i can find are xkey090717
 

adolf hauer

Registered
Messages
22
AKTA (Prev MaxTv) 4.8E ok

Please help me: I have an OPTIBOX CX PVR READY EXTRA with sw v.1.17.67, loader 1.02 and each time I tried to put with the stick yours keys, do not work. Can you give an explanation or can you help me? :mecry:
 

szonya

Registered
Messages
2
From today appears the "No signal" message, not the "Coded channel" text and it does not working with the new key. What is the problem? Please help me!
 

ig0r

Administrator
Messages
7,161
No signal - your reciever are damage....or your satdish no correct set, or channel no work from satellite from today...
Or cable no insert in reciever

Or satellite no work now...it is possible too
Many variants...

Write what satellite are you recieve....

I think its no about SoftWare or keys files....it more phisical problems :)
 

szonya

Registered
Messages
2
No signal - your reciever are damage....or your satdish no correct set, or channel no work from satellite from today...
Or cable no insert in reciever

Or satellite no work now...it is possible too
Many variants...

Write what satellite are you recieve....

I think its no about SoftWare or keys files....it more phisical problems :)

I have an Optibox PVR Ready, and I used the key by Janicar KEY_090813_by_JANICAR.rar.

Until now it has worked, and I did not touch anything. It is a double head antena, but the other receiver is not working too. The cable is corrected properly...
 

ig0r

Administrator
Messages
7,161
Try use old keys!...
May be need wait janicar for replies...

Or try make FULL RESET in sat reciever!
 

gigibamse

Registered
Messages
19
Please help me: I have an OPTIBOX CX PVR READY EXTRA with sw v.1.17.67, loader 1.02 and each time I tried to put with the stick yours keys, do not work. Can you give an explanation or can you help me? :mecry:


Key unzip and put contents in root stick.
Red button-key download
 

gigibamse

Registered
Messages
19
From today appears the "No signal" message, not the "Coded channel" text and it does not working with the new key. What is the problem? Please help me!




Check the LNB, voltage 14v/18v
Check; Installation**** Satellite setup
LNB power-on
LNB type-universal
LNB freq - 9750/10600
 

ptdvod

Registered
Messages
790
I have an Optibox PVR Ready, and I used the key by Janicar KEY_090813_by_JANICAR.rar.

Until now it has worked, and I did not touch anything. It is a double head antena, but the other receiver is not working too. The cable is corrected properly...

What I have written all the keys in addition to work that is 100% safe because it checked with you to reciver, view cable and connectors for the second one hundred reciver have no signal
 

georgerad

Registered
Messages
1
Hi,
i have an optibox fta pvr ready plus to whom is attached a card reader. Everything works fine accept 2 channels from hotbird, sci-fi and universal which completely blocks the device. Nothing works until hard reboot.
Anyone had this problem. Any fix?
 

pdaniel71l

Registered
Messages
26
Does anyone know of an Optibox TFA PVR Ready soft, that supports conax encryption ? Thanks.

PS: as we all know, as of around 15 PM GTM digi tv W 1.0 is dead on Optibox, any software updates in the near future or we can all throw our optiboxes out :(
 
Top