Different emu for different channel : in which way ??

None ;o), I prefer my own image as it does exactly what I expect from an image and works on all boxes I have, DM8000, DM800se, DM800HD, DM500HD, VU+ Solo and VU+ Duo.

... and its based on the best image ever, the DreamElite-BlackHole 1.3.x that was built in 2010 and stopped support for DM boxes.

;o)

TS

You need to download the SSL original NFI boot file from the link I gave you (I repeat below).

http://www.sat-universe.com/redirec...e.com/download/7020/secondstage-dm8000-82.nfi

Then :

1. You press the front button of your DM8000 to have access to WEB interface to load the NFI image.

2. You load my image NFI.

3. You put again the same WEB interface to load the SSL NFI file (without rebooting), it will overwrite the Ferrari SSL and put the original SSL.

Then you can finally reboot, the box will have inside my image with the original SSL (that overwritten the one from the image).

TS

I have a somewhat similar problem I need to switch between cccam and mgcamd for different channels, I need it on ET9000, though. But there are BlackHole images for it, can I hope to achieve that with a BH image?
As it is now, I only can stop one and activate the other manually from the softcam manager menu.

You can install the image you want for box you want (all versions are available).

The images have built in the SSL for Ferrari (the DM800se has also the original SSL).

Once loaded the DE-OpenBlackHole image, you load again the WEB page and load the SSL for your sim card (version SSL82 for sim2, or original). The only after this 2 steps you can reboot box.

Once this is done, you need to do :

1- On the Addon Manager, you have on the second page the OpenBlackHole CAMs list, you can install any you want from the list (or any that is BlackHole compatible).



2- Update the image to latest version of image (On the Addon Manager you find with Green + Yellow button), you will have on the 2nd page at the end the support section for OpenBlackHole. Update the image to latest update on it for your type of box.



DM800se (Ferrari) : http://www.datafilehost.com/download-7f502264.html
DM800se (Original) : http://www.datafilehost.com/download-bb271d9d.html
DM500HD (Ferrari) : http://www.datafilehost.com/download-ee7c40f5.html
DM8000 (Ferrari) : http://www.datafilehost.com/download-f8851deb.html
DM800HD (Ferrari) : http://www.datafilehost.com/download-d0668c46.html
VU+ SOLO (Clone & Original) : http://www.datafilehost.com/download-87d45ac6.html
VU+ DUO (Clone & Original) : http://www.datafilehost.com/download-de83cf5e.html

TS