NCam (official)

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,194
Code:
########################################################
###                                                  ###
######     NCam 0.1 #1 Compiled: 19-07-20012      ######
###                                                  ###
########################################################

NCam cardserver v0.1, build #1 ( MIPS, X86 )
Copyright (C) 2012 NCam developers.
This program is distributed under GPLv3.
NCam is based on OScam

------------------------------------------------------------

Features  : webif monitor dvbapi anticascading pcsc loadbalancing
Protocols : newcamd cccam cccam_share cache-exchange serial
Readers   : nagra seca viaccess

-------------------------------------------------------------
Compilados:

Ncam.mips	enigma2 - Mipsel
Ncam.x86	Linux PC (32 bit)

Pendientes:

PENDIENTE1 - Ncam.ppc	enigma1 - Power PC 
PENDIENTE2 - Ncam.x86_64	Linux PC (64 bit) 
PENDIENTE3 - Ncam.sh40	 Enigma2/Spark - (qbox/ipbox/kathrein/Golden Media)

------------------------------------------------------------

Instalación NCam (Mipsel):

/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional

*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist

-------------------------------------------------------------

Intalación Ncam (Linux PC (32 bit):

/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/usr/local/etc/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional

*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist 

-------------------------------------------------------------

Configuración de Ncam vía web:

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam

In English

Code:
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # #
# # # # # # 0.1 # 1 Compiled NCAM: 19-07-20012 # # # # # #
# # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

NCAM cardserver v0.1, build # 1 (MIPS, X86)
Copyright (C) 2012 NCAM developers.
This program is Distributed under GPLv3.
NCAM is Based On Oscam

-------------------------------------------------- ----------

Features: pcsc anticascading Webif dvbapi monitor loadbalancing
Protocols: cccam newcamd cccam_share serial cache-exchange
Readers: nagra viaccess dry

-------------------------------------------------- -----------
compiled:

Ncam.mips enigma2 - Mipsel
Ncam.x86 Linux PC (32 bit)

pending

PENDIENTE1 - Ncam.ppc enigma1 - Power PC
Outstanding2 - Ncam.x86_64 Linux PC (64 bit)
PENDIENTE3 - Ncam.sh40 Enigma2/Spark - (Qbox / ipbox / kathrein / Golden Mean)

-------------------------------------------------- ----------

Installation NCAM (Mips):

/ usr / lib /: libpcsclite.so.1, libpcsclite.so.1.0.0 (permissions 755)
/ usr / bin /: NCAM (permissions 755)
/ var / tuxbox / config /: ncam.user, ncam.server, ncam.conf (permissions 755) * the rest is optional

* Optional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist

-------------------------------------------------- -----------

NCAM Channel Install (Linux PC (32 bit):

/ usr / lib /: libpcsclite.so.1, libpcsclite.so.1.0.0 (permissions 755)
/ usr / bin /: NCAM (permissions 755)
/ usr / local / etc /: ncam.user, ncam.server, ncam.conf (permissions 755) * the rest is optional

* Optional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist

-------------------------------------------------- -----------

NCAM configuration through the web:

NCAM Admin Control: http://127.0.0.1:8181/ (192.168.xx)
user: root
password: ldteam

THanks lonasdigital team
 

elgeneral

Registered
Messages
7,811
########################################################
### ###
###### NCam 0.2 #1 Compiled: 22-07-20012 ######
### ###
########################################################

PHP:
NCam cardserver v0.2, build #1 ( MIPS, X86 )
Copyright (C) 2012 NCam developers.
This program is distributed under GPLv3.
NCam is based on OScam

------------------------------------------------------------


 Features  : webif monitor dvbapi pcsc
 Protocols : newcamd cccam cccam_share
 Readers   : nagra seca viaccess videoguard


-------------------------------------------------------------
Compilados:

Ncam.mips    enigma2 - Mipsel
Ncam.x86    Linux PC (32 bit)

:nana:
 

juli13

Staff member
Administrator
Messages
10,194
0.2.1 NCAM Rev.1


changes:
- Added back the loadbalancing
- Modification of code in internal parts of the NCAM
 

juli13

Staff member
Administrator
Messages
10,194
NCAM 0.2.2

Code:
[B]changes:[/B]
- Added support for Conax cards.
- Rewrite and internal debugging code NCAM.
- Removed the option SCRIPT web.
THanks lonasdigital team
 

juli13

Staff member
Administrator
Messages
10,194
########################################################
### ###
###### NCam v0.2.2 Compiled: 23-07-2012 ######
### ###
########################################################

Code:
 NCam cardserver v0.2.2, ( MIPS, PPC, X86, X86_64, SH40 )
 Copyright (C) 2012 LD TEAM.



-------------------------------------------------------------
 Features  : webif monitor dvbapi pcsc loadbalancing
 Protocols : newcamd cccam cccam_share
 Readers   : nagra conax seca viaccess videoguard
-------------------------------------------------------------


Compilados:


Ncam.mips      Enigma2 - Mipsel
Ncam.x86       Linux PC (32 bit)
Ncam.x86_64    Linux PC (64 bit) 
Ncam.ppc       Enigma1 - Power PC 
Ncam.sh40      Enigma2/Spark - (qbox/ipbox/kathrein/Golden Media)


------------------------------------------------------------




Instalación NCam (Mipsel, sh40):




/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional




*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist




-------------------------------------------------------------


Instalación NCam (PPC):


Igual no son necesarias las librerías aquí, si no os la pide no ponerlas.


/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional




*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist


--------------------------------------------------------------


Intalación Ncam (Linux PC (32 bit y 64 bit):




/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/usr/local/etc/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional




*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist 




-------------------------------------------------------------




Configuración de Ncam vía web:




Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam


changes:- Added binary SH40

- Added binary PPC
- Added binary X86_64
- Does not change the version only, new architectures supported.
 

tani1

Staff member
Super Moderator
Messages
17,767
########################################################
### ###
###### NCam v0.3 Compiled: 28-07-2012 ######
### ###
########################################################


Changes:
- Added support for Irdeto.
- Added support for cryptoworks.
- Modified the part of CCcam, MAX / MIN connections, MAX / MIN ECM / EMM.
- Modified MAXHOP, reshare, IGNRSHR, STEALTH, reconnection times, etc.
- Major changes in general in the CCcam protocol.
- Added support for more number of clients / servers CCcam.
- Modifcados nagravision reader internal parameters (looking for more stability).
- Modified dvbapi reader parameters (looking to improve reading times).
 

tani1

Staff member
Super Moderator
Messages
17,767
NCam-1.1-r2 (Oficial)


#########################################################################


NCam cardserver v1.1-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).

Source Code: https://github.com/javilonas/NCam
#########################################################################


************************************************************************
Important notice !!

This is the OFFICIAL version (18.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
************************************************************************


Compiled:


ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


************************************************************************

Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!


************************************************************************


Changelog v1.1-r2:


- Added support for CCcam.cfg native.
- Added new option auto block sid in CCcam.
- Added support for auto restart reader after some time and extend reset cycle for network reader.
- Added friendly output debug message for CCcam.
- Added Support for streamguard.
- Update jquery-3.2.0
- Upgrade reader tongfang.
- Support httputf8 webif (on/off).
- Added latest OScam patchs till the date 18-03-2016.
- Tandberg ecm and emm algorithm fix.
- Added support radegast.
- Added Ping time feature.
- Added MAX accepted ECM time.
- Added Support for never retry failed load balanced things.
- Define which client can use option force reopen.
- Improved logging and enabled debug mode again.
- Live log active.
- Changes in webif status.
- New option of services in the reader to select a reader in priority.
- Added option ECM timeout limit.
- Fix N*D*S CWs are dropped when connected to real CCCam servers.
- Increase to 128 the service limit.
- Increase ECM length and Fix check_sec_len for some large ecm data.
- Fix card matching for prov is 0 in CCcam.
- General Arrays in CCcam Protocol, now works more like the native CCcam.
- Arrangements to reduce blockages and freezes.
- Support for Rasp pi 3 (Prismcube uses this same binary).
- Fixed the problem of anticascading.
- Fix for aggressive-loop-optimizations warnning.
- Add extended allowed timeframe request.
- Accept all providers when provider is not specified
- Add full support for multiport supported by Cs378x.
- add support AES key to dvbapi and newcamd
- Completely reconfigured by default. Do not forget to redo your config.
 

tani1

Staff member
Super Moderator
Messages
17,767
########################################################
### ###
###### NCam v1.2-r3 Compiled: 20.3.2017 ######
### ###
########################################################

Changelog v1.2-r3:

- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.

Important notice !!

This is the OFFICIAL version (20.3.2017)
There are no later versions.

Thanks to LonasDigital Team !!
 

tani1

Staff member
Super Moderator
Messages
17,767
########################################################
### ###
###### NCam v1.3-r7 Compiled: 01.04.2017 ######
### ###
########################################################

Changelog v1.3-r7:

- Added support for more architectures.
- Improved support for CCcam multiport.
- Fix for ppc and ppc-old (user and pass).
- Fix libs for ppc and ppc-old.
- Fix posible crash in webif.
- New functions for loadbalance.
- Improved reload reader function on loadbalanced.
- New functions for ACOSC.
- Added IP information in the readers tab.
- Added Port last conection in the users tab.
- Fix for refresh tittle in status.
- New link to logo, embedded in base64.
- Improved connection between multics/newbox.
- Disable default debug.
- Update parse entitlements for streamguard.
- Fix ON/Off dvbapi.
- Add support for dvn jetcas.
- Streamrelay optimized.
- Fix excache in webif for rasp, prismcube, etc...
- Fix for "Skip CWs checksum test only for" in readers.
- Optimized German caid (try fewer freezes).
- Various arrangements during the tests during the last days.

Important notice !!

This is the OFFICIAL version (01.04.2017)
There are no later versions.

Thanks to LonasDigital Team !!
 

tani1

Staff member
Super Moderator
Messages
17,767
########################################################
### ###
###### NCam v1.4-r0 Compiled: 02.04.2017 ######
### ###
########################################################


Changelog v1.4-r0:

- Added support for stapi5.
- New config somewhat more globalized (If you have cuts, adjust the config to your needs).
- Increased values of ECM_FMT_LEN, CXM_FMT_LEN, and MAX_ATR_LEN.
- Compiled with new FLAGS to avoid problems in 4k architectures.

Important notice !!

This is the OFFICIAL version (02.04.2017)
There are no later versions.

Thanks to LonasDigital Team !!
 

tani1

Staff member
Super Moderator
Messages
17,767
########################################################
### ###
###### NCam v1.5-r0 Compiled: 04.04.2017 ######
### ###
########################################################


Changelog v1.5-r0:

- Added support for i686.exe.
- Added NodeID generator to CCcam.
- Fixed issue reported on new options in loadbalanced.
- Small arrangements in the webif in different areas (little appreciable).
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam 1.7

NCam Emu_1.7-r1 from javilonas

for prismcube just choice ncam-arm raspbian and send for prismcube with dcc if you have old ncam 1.5 just send ncan and chmod 755 reboot
this ncam config is official from ncam 1.5 test ok and work 100/100

[global]
logfile = /dev/null
maxecmtime = 0
maxecmtimenotfound = 0
fallbacktimeout = 1500
waitforcards_extra_delay = 700
preferlocalcards = 1
lb_min_ecmcount = 5
lb_max_readers = 1
lb_nbest_readers = 3
lb_savepath = /tmp/stats
disablecrccws_only_for = 0500,0100,1811,1819,1810,1802,0B04,0604,1880,1815, 0D97,0B02,0B00,090D,0B0F,093E,090F,0D00,0BAA,1805, 09CD,093B,1803,1813,1861,0B01,183D,0629,09C4,098C, 1830,1843,0D95,0D08,0D96,0963,4AEE,4AE1,09AF,09BE, 092F,4AE0,091F,1867,1863
[anticasc]
ac_enabled = 1
numusers = 1
aclogfile = /tmp/ncam_ac.log
[cache]
max_time = 7
csp_port = 20090
csp_serverip = 127.0.0.1
csp_allow_reforward = 1
[newcamd]
port = 50001@1810:000000,004001,004101;50002@0100:004106, 004108,005001;50003@0100:003311,003315,003317;5000 4@0000:003311
allowed = 0.0.0.0-255.255.255.255
key = 0102030405060708091011121314
[cccam]
port = 15020
serverip = 192.168.xx.xx
nodeid = 08CE5Axxxxxxxxxx
version = 2.2.1
reshare = 1
updateinterval = 30
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
dvbapi_enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = visor
boxtype = dreambox
[webif]
httpport = 8181
httpuser = root
httppwd = root
httplocale = en_EN
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httputf8 = 0
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam 1.7-r4 (oficial)

NCam 1.7-r4 (oficial)

NCam cardserver v1.7-r4, (MIPS, PPC, X86, X86_64, SH4, ARM, EXE) Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).

Changelog v1.7-r4:
- WebIf: show unauthorised access in ncam log.
- Fix for received CW has invalid checksum when CCcam own Node Id > 7FFFFFFFFFFFFFFF.
- When received CWs are different the logged warning contains wrong reader details.
- DVBAPI: parse pmtpid also for PC clients.
- Update a value to specific 15.
- ECM doublecheck is broken.
- CCcam 2.3.1 Support.
- Change CLOCKFIX default to disabled.
- Allow set demux for reader.
- Update EMU.
- Support for VideoGuard Sky Caid 098D.
- Add Max pids for extended CWs.
- Fix for Jet.
- Increase in the value of the maximum EMM / ECM size allowed.

################################################## #######################
************************************************** ********************************************
Important notice !! This is the OFFICIAL version (06.03.2018) There are no later versions. If you have downloaded any version, listed as 1.8, 1.9, 2.x, 3.x 4.x, etc ... These are FAKE versions. Be very careful when downloading non OFFICIAL versions, we are not responsible for those versions or what their authors may have added. The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license. License NCam: https://github.com/javilonas/NCam/blob/master/COPYING Signed: Javier Sayago (Javilonas)
************************************************** *********************************************
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android ARM (For all api android).
ncam.arm-marvell ARM (Synology DS114, DS214 and similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
************************************************** *********************************************
Ncam settings web::
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.
Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225
************************************************** *********************************************Legal warning ------------- NCam does not emulate by default any payment signal without its corresponding suscription. You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), nor www.lonasdigital.com are responsible for what third parties can do with NCam.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam-1.7-r4 (Oficial)

NCam-1.7-r4 (Oficial)
ALL Images mips - arm .ipk .deb

DreamOSat camManager
BlackHole/OpenBlackHole
OpenTSimage/Tsimage
openATV
PBnigma-VIX
ruDREAM
PKT
OpenVIX
SatdreamGr
Egami
OpenDroid
DDD-Demoni
GP3
OpenSPA
ItalySat
Dream-Elite
OpenPLI
Merlin3
newnigma2
OoZooN
VTI
TDW
PeterPan
LT
OpenLD
HDMU
Domica
HDFREAKS
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam_5.0-r1 (Official)

NCam_5.0-r1
@Javilonas

#########################################################################
OFFICIAL version
NCam cardserver v5.0-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
#########################################################################

Changelog v5.0-r1:

- Patch Allow 0 fallback readers in loadbalancer (By Mic)
- Fix ecm CAID 0100.

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************

Ncam settings web::

Ncam Admin Control:http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default.
 

Haitoku

Registered
Messages
3,933
NCam 5.1-r1

Changelog v5.1-r1:
- Patch rewrite doublecheck logic (By Mic).
- Added cw hash mode 30, 31, 32, 33, 34 for powervu.
- Increased MAX ECM length.
- Latest changes Oscam.



Compiled:


ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default.

thx Javilonas
***********************************************************************************************
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
NCam 5.2-r1 (official) 14.09.2020

Changelog v5.2-r1:
- Rework code ref gbox_maxecmsend.
- Fix sharing instability side effect.
- [powervu] Fixed emm algo.
- Fixed warning messages with high GCC 9.x.x
- Fixed warning integer constant is too large for long type.
- Add Newcamd NCam and MGcamd (Stealth mode)
- Fixed gbox module ecm debug string error.
- Add repeat to ask all gbox readers again during fallback time.
- Fixed for CAK7 Cards HD03/04/05.
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************

Ncam settings web::

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam-6.4-r4 (Official)

Changelog v6.4-r4:
- Add support iCam (Thanks to the creator @icb of the ICAM v8 patch).
- Add new KScamd protocol (still in development).
- Fixes for Stream Relay.
- Fixes for Radegast protocol and icam.
- Fixes for Viaccess and VideoGuard.
- Optimized for lower RAM and CPU consumption.
- Fixed issue preventing ICAM from starting
- Fixed issue that forced KScamd to have newcamd line active.
- Fixed the problem that modified the protocols used by users when accessing them via webif.

Thx Javilonas

NOTE: the files were split into two folders. Download both
 

Attachments

  • NCam_6.4-r4.rar
    29.6 MB · Views: 87
  • NCam_6.4-r4(2).rar
    16.1 MB · Views: 74

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,619
NCam-6.6-r1 (Official)

Changelog v6.6-r1:
- Fix bug that prevented ICam from working normally on some architectures.
- Prevent ffdecsa from going through global optimization at compile time (Makes the system more stable).
- Added new build for Armada 38x.

Thx Javilonas

NOTE: the files were split into two folders. Download both
 

Attachments

  • NCam_6.6-r1.rar
    28.8 MB · Views: 130
  • NCam_6.6-r1(2).rar
    17.5 MB · Views: 119
Status
Not open for further replies.
Top