Oscam EMU Test

O

ooOO_SORGOS_OOoo

:confused: DEAR @oys is it ok now?

Code: 
2019/02/21 19:28:59 7E1C2DC8 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2019/02/21 19:28:59 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2019/02/21 19:28:59 7E1C2DC8 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/02/21 19:28:59 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
2019/02/21 19:29:03 7E1C2DC8 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2019/02/21 19:29:14 7E1C2DC8 c        (-) -- Skipped 2 duplicated log lines --
2019/02/21 19:29:14 7E1C2DC8 c   (dvbapi) Demuxer 0 stop descrambling program number 1A18 (NLO TV)
2019/02/21 19:29:14 7E1C2DC8 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2019/02/21 19:29:14 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2019/02/21 19:29:14 7E1C2DC8 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/02/21 19:29:14 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
2019/02/21 19:29:18 7E1C2DC8 c   (dvbapi) [COLOR="Red"]Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers![/COLOR]
2019/02/21 19:29:23 7E1C2DC8 c        (-) -- Skipped 1 duplicated log lines --
2019/02/21 19:29:23 7E1C2DC8 c   (dvbapi) Demuxer 0 stop descrambling program number 1A0E (34)
2019/02/21 19:29:23 7E1C2DC8 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2019/02/21 19:29:23 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 4 STREAMpids in caPMT
2019/02/21 19:29:23 7E1C2DC8 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/02/21 19:29:23 7E1C2DC8 c   (dvbapi) Demuxer 0 found 1 ECMpids and 4 STREAMpids in PMT
2019/02/21 19:29:27 7E1C2DC8 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

pls need conf files send here..
 
xsat

xsat

Registered
Messages
228
Hi @juli13,

Working great, AFN and Discovery, even CNBC(Tandberg, also Biss channels on My ATV6.1 DM920 with No boot.

hopefully, with add protocol:constcw again like 11495.

Thanks again,
 
xsat

xsat

Registered
Messages
228
Hi @juli13,

Working great, AFN and Discovery, even CNBC(Tandberg, also Biss channels on My ATV6.1 DM920 with No boot.

hopefully, with add protocol:constcw again like 11495.

Thanks again,
 
juli13

juli13

Staff member
Administrator
Messages
10,198
Here you have oscam with protocol constcw enable. See the photo.

Test it, is openpli4.0 but should work on all mipsel.
 
xsat

xsat

Registered
Messages
228
Yes, Arm 11495 works fine with protocol constcw enable.
Updated version 11500 - 11503 has left.
read only oscam.version -OSCam r11503 r790 as ,
----
Built-in SoftCam.Key: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: yes
serial: no
constant CW: no
Pandora: no
ghttp: no

Reader support: yes
----
 
A

antrabe

Registered
Messages
530
i could read that swtching between powevu and others system not needed to reboot on dreambox 7080 its right?
 
hisakatano

hisakatano

Member
Messages
909
OSCAM EMU Test

Great work with My DM900UHD(Clone)
166 Discovery TP <-> 113 AFN TP Working Fine(No Rebooting)
and also Biss Channel Working Goog
Very Nice Work !!!!!! Thanks !!!!!!!!
 
fmoreira

fmoreira

Registered
Messages
249
Thanks for trying to solve this old and annoying issue...

I have a DM900Uhd with OpenAtv 6.2 image. Without stream relay:

Afn - Ok
EFE (30W) - Ok
SIS, Discovery and Fight Network (15W)- Au woks ok but i have a black screen... :(



The log is "normal":

2019/02/22 10:04:18 72D09C6F c (ecm) dvbapiau (0E00@000000/0000/0014/40:6B9E22584146BECE09DE237D5B8D1D91): found (1 ms) by emulator - CORAL TV1 - PVU4
2019/02/22 10:04:19 72D09C6F c (ecm) dvbapiau (0E00@000000/0000/0014/40:448EC2A02504713EF9E4E422B98A2C23): found (1 ms) by emulator - CORAL TV1 - PVU4
2019/02/22 10:04:20 72D09C6F c (ecm) dvbapiau (0E00@000000/0000/0014/40:B1587FFFC6C798C1073472D7AD9D7D3D): found (1 ms) by emulator - CORAL TV1 - PVU4
2019/02/22 10:04:21 72D09C6F c (ecm) dvbapiau (0E00@000000/0000/0014/40:6331D060EF5B2817DF8F24C5454E2878): found (1 ms) by emulator - CORAL TV1 - PVU4

Can be a OScam.conf settings problem? Or it is a Oscam version problem?

Thanks again!!!



Edit:
I do not have constant CW enable. It is possible enable it by myself or do i need a different Oscam version?
 
Last edited:
A

antrabe

Registered
Messages
530
yes in this last attached works powervu and can switch to other system without has to reboot the dreambox but still freezes on powervu
 
R

regdal

Registered
Messages
42
Hi everybody, where I can find only oscam file for Vu+Solo 4K without tar.gz and .ipk? Thank you in advace.
 
You must log in or register to reply here.
Top