• Discussion in the Admin room about nightly images, we dont really need or want these posting for the following reasons.

    1. We all know where to get them.
    2. Never have a change log.
    3. The changes if any are not worthy of anyone upgrading there boxes on a daily basis.
    4. They clutter the forum up.

    Posts will be removed.

    Ferret

Latest Tiger HD Firmware

bozomustafa_68

Registered
Messages
16,935
==========================
V1.39 - 2009-12-14
==========================
Fix:
1) In USALS Setup menu, input longitude angle more than 180 or latitude angle more than 90;
2) Page number not displayed when enter teletext again after exit teletext in some speceal pages;
3) The number of files not correct displayed in USB menu when it is more than 127;
4) Burst A and Burst B not correct when switch DiSEqC1.0;
5) Favorite channel list not correct after delete favorite channels;
6) Cut off power of USB disk when standby;
Add:
1) Twin Protocol and Micro Protocol;
2) Home sharing;


---- open hb 11727
 
Last edited:

bozomustafa_68

Registered
Messages
16,935
==========================
V1.40 - 2009-12-24
==========================
Fix:
1) Russian channel name displayed not correctly;
2) 22K always off after motor moved;
 
Last edited:

marokino08

Super VIP
Messages
7,462
==========================
V1.54 - 2010-03-31
==========================

1)Fix RCU remote by itself, disable continuous function of RCU
2)Change information to Enable / Disable by press F1+678
3)Ask for password when make update software through USB or FTP
 

marokino08

Super VIP
Messages
7,462
17.05.2010

How to update new sw?

1.unzip the file ,you can will get the file: NxpRom.bin;
2.create a new folder with the name "files" under root directory (important, has to be under root directory)
of your usb disk with fat or fat32 format(important, has to be fat or fat32),
copy the "NxpRom.bin" file to the "files" folder, then you will get "files/NxpRom.bin" in your usb disk;
3.Insert the usb disk to the stb,then restart the stb,it will check "NxpRom.bin" in the usb's "files" folder,
if it find the "NxpRom.bin" in "files" folder, it will upgrade the file automatically.

Note: during the process of upgrading the S/W, stb will be restarted several times, it's normal ,please don't power off, and don't remove the usb disk.
4.After finishing upgrade, STB will auto enter menu or play channel;

5,Set to factory default,then you can search channels and test it.
 

bozomustafa_68

Registered
Messages
16,935
Tiger T600 HD_single_usb_V1.49_0528

Code:
How to update new sw?
1.unzip the file ,you can will get the file: NxpRom.bin;
2.create a new folder with the name "files" under root directory (important, has to be under root directory)
  of your usb disk with fat or fat32 format(important, has to be fat or fat32), 
  copy the "NxpRom.bin" file to the "files" folder, then you will get "files/NxpRom.bin" in your usb disk;
3.Insert the usb disk to the stb,then restart the stb,it will check "NxpRom.bin" in the usb's "files" folder,
   if it find the "NxpRom.bin" in "files" folder, it will upgrade the file automatically.

 Note: during the process of upgrading the S/W, stb will be restarted several times, it's normal ,please don't power off, and don't remove the usb disk.
4.After finishing upgrade, STB will auto enter menu or play channel;

5,Set to factory default,then you can search channels and test it.
 
Last edited:

marokino08

Super VIP
Messages
7,462
24.06.2010

How to update new sw?

1.unzip the file ,you can will get the file: NxpRom.bin;
2.create a new folder with the name "files" under root directory (important, has to be under root directory)
of your usb disk with fat or fat32 format(important, has to be fat or fat32),
copy the "NxpRom.bin" file to the "files" folder, then you will get "files/NxpRom.bin" in your usb disk;
3.Insert the usb disk to the stb,then restart the stb,it will check "NxpRom.bin" in the usb's "files" folder,
if it find the "NxpRom.bin" in "files" folder, it will upgrade the file automatically.

Note: during the process of upgrading the S/W, stb will be restarted several times, it's normal ,please don't power off, and don't remove the usb disk.
4.After finishing upgrade, STB will auto enter menu or play channel;

5,Set to factory default,then you can search channels and test it.


rename the sw file by pc or usb maneger to use again

after sw NxpRom11 rename to NxpRom
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
New Software v1.75 30-12-2010

Corected job HDD NTFS
added a package of Sky Italy
Fixed a problem disappearing sound (sattelit Amos 4W)
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
NEW Software v1.77 6-01-2011

Do reset to factory settings, rescan channels
sw bugs
Code:
> 1-ACC sound cutting
> ---fixed ,please chech new s/w
> 2-in Russian language can writ but not found the move in you tube
> ----fixed
> 7- THIS CHANNEL SOUND TOO MUCH CUTTING ac3
> AMOS 4W
> 1+1 - 10722 H 27500 3/4 VideoPID 769 AudioPID 770 Uk
> ÒÂi - 10722 H 27500 3/4 VideoPID 1537 AudioPID 1538 Uk
> Òîíèñ - 10759 H 30000 3/4 VideoPID 65 AudioPID 66 Uk
> -------fixed ,please check the s/w
> 8-in FAV list when delete channel should be not delete from all channel
>
> 9-when move channel in FAV list the channel number not change
>
> 10-can not open ORF channel
> ------please check the new s/w
> 11- when add sattelite can not add TP should make blind saerch
 

bozomustafa_68

Registered
Messages
16,935
T500_V1.61

Code:
==========================
V1.61 - 2010-11-24
==========================
	1)Replace G-Share+ to GSh2
	2)To open TNTSAT:http://en.kingofsat.net/pack-tntsat.php ?
	3)Update DRE CA
	4)Change ftp address
 
Last edited:

Haitoku

Registered
Messages
3,933
21/02/2011


PHP:
[B]Add LNB 5150/5750 option and set default LNB to 5150/5750 for C band satellite[/B]
 
Top