Latest Version of Wally West

juli13

Staff member
Administrator
Messages
10,194
wallywest_5.03

30.09.2009

Code:
	After steadfastly refusing to burnish his Thowi Multiboot and it nice and slow time is the Wally West is growing up here, let's try the version 5 of WW a bit. 

What is different / new: 

When you install the plugin makes it installed if no BA is no longer found the hitherto usual Umformatiererei of BA devices on the WW layout with a 96 MB FAT partition large. 

The real novelty lies therefore in the plugin itself WW The pure size of the FAT with backup / restore change was always too inflexible and too complicated to solve. 

Furthermore, one can protect his image in the BA before, inasmuch as the fly out first! 

Therefore, I have missed a small but now WW partitioned Wizzard where, after the first plugin installation the device which can partition and format / may want to choose (something you always want what you have) and want to partition in the device as you follow: 

And you can not choose now 3 types of partitioning: 

1) 
whole device as ext3 

= Barry Allen Classic 

2) 
FAT at the beginning of 16-2048MB in size (you get way, man 0 selects Case 1) - Rest of the device as a large ext3 partition 

Classic = Wally West as the directory where the images are in ext3. 

3) 
FAT at the beginning and end of image up to 8 partitions (0 Partition you get to choose the way, case 2) - = similar Thowi's multi-boot, only the 3rd partition is no longer the mbx but the logical partition where the image partitions are indoors and partition 2 is like the classic WW / media / ba. 

So you Could the WW 5 times on your boxes in all versions durchtesten (CF / USB / SD, only Hardddisk he refuses to partition and format / and it comes with Hardddisk as before, only Case 1 with the existing ext3)
 

juli13

Staff member
Administrator
Messages
10,194
wallywest_5.0.11

11.10.2009

I still have a quick check 5.0.11 made by the SLD if the flash image is then gefroozen gff. to unfreeze the partition or erase the safe denied.

So please do not upgrade stress, otherwise there is nothing new to 5.0.8 from WW

THX gutemine
 

juli13

Staff member
Administrator
Messages
10,194
wallywest_5.0. 17

enigma2-plugin-extensions-wallywest_5.0. 17
 

fushkrujs

VIP
Messages
1,123
Wally West 6.1 für Barry Allen 6.1

Wally West 6.1 für Barry Allen 6.1

Code:
Hi !

Wie versprochen geht es hier mit Wally West weiter. 

ABER nachdem WW 6.1 für BA 6.1 ist kann man die beiden noch NICHT zusammen verwenden weil das BA 6.1 noch NICHT public ist.

Der kit hier ist also erstmals NUR dafür da um die WW Funkionalität zum Partitionierne zu testen, NICHT um ihm mit BA 6.0-* zusammen zu verwenden.

Es wird also ausser Ärger NICHTS bringen wenn Ihr nachdem Ihr WW gestetet/benutzt habt ein BA 6.0.9 installiert (na ja ausser im layout 1 wo kein FAT und keine Imagepartitionen existieren, weil das macht BA sowieso selbst auch).

Ich möchte einfach mal wissen ob der WW kit sauber in allen Varianten (Layout 1,2,3 - also ohne FAT, mit FAT und einer ext3 Partition für /media/ba und alle Images sowie mit FAT, Partition für /media/ba und bis zu 8 Imagepartitionen /media/ba/1...8 auf allen boxen sauber funktioniert).

WW 6.1 unterstüzt nur mehr Devices ab 512MB und alles bis zu 32GB wird als device akzeptiert.

Bitte seit beim layout 3 auch nicht zu streng was die partitionsgröße angeht, durch den Filesystemoverhead und die fixen Blöckgrößen wird die letzte Image Partition oft ein bisschen zu klein oder zu gross sein. Nur wenn das extrem ist (also mehr als +/- 20%) oder eine Partition fehlt das daher als Fehler reporten.

Bitte auch beachten das WW NUR in Images finltioniert wo das fdisk in der busybox ist, AAF und OpenPLi wo es nur sfdisk gibt sind für das Partitionieren mit WW daher NICHT geeignet und ausser eine Fehlermeldung wird WW sich daher auch nicht benutzen lassen.

Und bitte auch testen ob es mit mehreren Devices funktioniert das gewünschte auszuwählen und vor allem auch ob es mit CF Karten noch auf der 7025 geht.

Und auch nicht nur das formatieren testen, sondern auch das Checken von Imagepartitionen und das Formatieren, sowie Backup und Restore des ganzen BA Mediums von /media/ba auf die Harddisk als ba.tar im /media/hdd/backup (das backup ist eh schnell wenn es noch leer ist)

Na ja und Crashen sollte es auch nicht :-)

Viel Spass beim WW Testen und je schneller Ihr damit durch seit, umso schneller wird es auch das BA 6.1 geben um das Ergebnis der Partitioniererei von WW auch benutzen zu können.

Und wie schon gesagt kommt mir nicht mit Fehlern einer anschließenden BA installation, das kann nicht gehen und testen wir auch noch nicht.

LG
gutemine


Code:
Hi!

As promised, just come along with Wally West.

Can BUT after WW is 6.1 to 6.1 for BA to use the two together because the BA has NOT yet 6.1 is NOT public.

The first kit so here's just there to test the WW SMDs to Partitionierne, NOT to use it with BA to 6.0 * together.

So it will bring trouble NOTHING except if your after your WW gestetet have used / installed 6.0.9 a BA (well except in a layout where there are no FAT partitions and no image, because the BA itself also makes it anyway).

I just want to know even whether the WW kit clean in all versions (1,2,3 layout - without FAT, FAT and ext3 partition for / media / ba and all images and works with FAT, partition for / media / ba and Up to 8 partitions Image / media/ba/1...8 clean on all boxes to work).

6.1 Only WW supports more devices from 512MB up to 32GB, and everything is accepted as a device.

Please layout for the three and not too strict in terms of the partition size by the file system overhead and the fixed block sizes, the last image partition is often a bit too small or too large to be. Only if this is extreme (ie more than + / - 20%) or a partition therefore lacks the reports as an error.

Please also note that ONLY WW finltioniert in images where the fdisk in busybox is OpenPLi AAF and where there are only sfdisk for partitioning are therefore NOT suitable with WW and WW except an error message is, therefore, can not even use.

And please also test whether it works with multiple devices and select the desired especially if it goes with CF cards are still on the 7025th

And also try not only to format, but the check in of image partitions and formatting, as well as backup and restore of the entire BA medium / media / ba on the hard disk as ba.tar in / media / hdd / backup (the backup is always quickly if it is still empty)

Well it should, and not crashing :-)

Have fun testing WW and the faster your order by Date, the faster it will also give BA 6.1 to the result of the Partitioniererei WW can also use.

And as I said do not come here with a subsequent BA installation errors that can not go and test it, we still do not.

LG
gutemine



Thanks gutemine
 

fushkrujs

VIP
Messages
1,123
Scheinbar wird das hier wieder ein Monolog nachdem alle danach gerufen haben :)

Und wenn es dann nach Euren ausgiebigen Tests wieder nicht gleich funktioniert bin ich wieder Schuld ...

Aber egal, auf der ersten Seite ist jetzt ein 6.1.1 kit von Wally West wo ein paar Bugs gefixed wurden die ich selber noch gefunden habe.

Bitte nur mehr diesen kit zum Testen verwenden.

Apparently this is again a monologue after all have called after

And if it does then your after extensive testing again I'm not the same fault again ...

But anyway, is now one of the first page of Wally West 6.1.1 kit where a few bugs now fixed that I found myself even more.

Please only use this kit for testing.

Thanks gutemine
 

notropil

Registered
Messages
628
Wally West 6.1.4

Code:
Wie versprochen geht es hier mit Wally West weiter. 

ABER nachdem WW 6.1 für BA 6.1 ist kann man die beiden noch NICHT zusammen verwenden weil das BA 6.1 noch NICHT public ist.

Der kit hier ist also erstmals NUR dafür da um die WW Funkionalität zum Partitionierne zu testen, NICHT um ihm mit BA 6.0-* zusammen zu verwenden.

Es wird also ausser Ärger NICHTS bringen wenn Ihr nachdem Ihr WW gestetet/benutzt habt ein BA 6.0.9 installiert (na ja ausser im layout 1 wo kein FAT und keine Imagepartitionen existieren, weil das macht BA sowieso selbst auch).

Ich möchte einfach mal wissen ob der WW kit sauber in allen Varianten (Layout 1,2,3 - also ohne FAT, mit FAT und einer ext3 Partition für /media/ba und alle Images sowie mit FAT, Partition für /media/ba und bis zu 8 Imagepartitionen /media/ba/1...8 auf allen boxen sauber funktioniert).

WW 6.1 unterstüzt nur mehr Devices ab 512MB und alles bis zu 32GB wird als device akzeptiert.

Bitte seit beim layout 3 auch nicht zu streng was die partitionsgröße angeht, durch den Filesystemoverhead und die fixen Blöckgrößen wird die letzte Image Partition oft ein bisschen zu klein oder zu gross sein. Nur wenn das extrem ist (also mehr als +/- 20%) oder eine Partition fehlt das daher als Fehler reporten.

Bitte auch beachten das WW NUR in Images finltioniert wo das fdisk in der busybox ist, AAF und OpenPLi wo es nur sfdisk gibt sind für das Partitionieren mit WW daher NICHT geeignet und ausser eine Fehlermeldung wird WW sich daher auch nicht benutzen lassen.

Und bitte auch testen ob es mit mehreren Devices funktioniert das gewünschte auszuwählen und vor allem auch ob es mit CF Karten noch auf der 7025 geht.

Und auch nicht nur das formatieren testen, sondern auch das Checken von Imagepartitionen und das Formatieren, sowie Backup und Restore des ganzen BA Mediums von /media/ba auf die Harddisk als ba.tar im /media/hdd/backup (das backup ist eh schnell wenn es noch leer ist)

Na ja und Crashen sollte es auch nicht :-)

Viel Spass beim WW Testen und je schneller Ihr damit durch seit, umso schneller wird es auch das BA 6.1 geben um das Ergebnis der Partitioniererei von WW auch benutzen zu können.

Und wie schon gesagt kommt mir nicht mit Fehlern einer anschließenden BA installation, das kann nicht gehen und testen wir auch noch NICHT.

Und die für WW nötigen dosfstools liegen bei einem OoZooN Image auf dem Feed und installieren sich mit sofern man vorher ipkg update gemacht hat, oder man holt sie von dort von Hand:

Thx To Gutemine

enigma2-plugin-extensions-wallywest_6.1.4_mipsel.ipk

dosfstools_3.0.11-r2_mipsel.ipk
 
Top