Comp*l Channels

in Streamrelay config try change value for "ECM fix delay"

same by me. I tried to modify ecm fix delay to 800 without success

runs with me with openatv 6.3
slight misfires
best value by me ecm fix delay = 270

The ecm fix delay doesn't do anything for compel. Compel doesn't send ecm's.

The problems you mention are "normal" and are described by anubis as well.

i have to contradict that
at over 500 i only see pixel at below 250 nothing
there must be some impact

look here

I'll check it...

Work with stream_ecm_delay 300 on Edision Mio4K.

as nautilus says stream_ecm_delay is not responsible for that, i've updated my oscam with an .ipk and now it no longer has any effect.
possibly updating an oscam emu has been buggy

On the new oscam Emu r785, the lack of a picture only interrupts the voice

Comp*l, Pw stream

Hi.
I have an DM8OOO HD receiver with last oscam-11471-mipsoe20-emu , and today i have find that don't work on stream, Comp*l and Pw. I have instaled back oscam-11462-mipsoe20-emu, and work both Comp*l and Pw. With oscam-11463-mipsoe20-emu don't work Comp*l and open Pw. With oscam-11465-mipsoe20-emu don't work Comp*l and Pw. With oscam-11466-mipsoe20-emu, and oscam-11471-mipsoe20-emu, when i try to open stream receiver is dead, must to reboot to start.
My seting is.
[streamrelay]
stream_ecm_delay = 300
#stream_relay_enabled = 0
stream_relay_enabled = 1
stream_emm_enabled = 1
stream_relay_ctab = FFFE

If stream_relay_ctab = FFFE, 0E00 open Comp*l and don't open Pw
If stream_relay_ctab = FFFE open Comp*l and Pw.
Who can check if is working wih last oscam-11471-mipsoe20-emu.
Or post right setting.
Thankyou.

i am also back on 11462
because pw and cp did not work with streamrelay

used: oscam-svn11471-arm_v7-webif-oscam-emu-patched

Comp*l, Pw stream

Hi.
With last version OSCAM 11478 with emu 785, and 11479 with emu 785, dont open Pw and Comp*l channel. From version 11462 with emu 784 stoped to open in stream.
Dested on DM 8000 HD. If other can test to confirm that.
Thankyou.