OSCam Easy Build Script (script only!)

marcel · Aug 22, 2010

UPDATE:
update!
v0.2.0
- so gut wie alles neu!
- 01_BINARIES folder heisst nun : BUILD
- many bugfixxes!
- manual.pdf hinzugefügt!
- optik komplett überarbeitet
- libusb support für alle plattformen hinzugefügt!
- option "13"-"site 2: yes" zeigt nun nur die oscam's an wovon es auch die toolchain gibt!
- option "10" baut nun alle kombinationen durch
Es checked dabei welche toolchains man mit option "11" installiert hat und baut auch nur diese!
Ebenso überspringt es dabei den jeweiligen buildprozess sofern diese svn-rev-version schon vorhanden ist!

update!
v.0.2.1
- small fix on "fritzbox-build"
- manual updated
- debug deleted
- speed optimized

update!
v.0.2.2
- main-menu-14-8 "easy-setup" added (turn on/off dl/installed chains if want!)
- nslu2 unslung added
- small code fixxes

PLEASE READ "MANUAL.PDF" FIRST!!!

- who's using older versions:
if exists 01_binaries folder, delete them
delete folder "easyscript"
delete oscam-svn/Makefile
rename oscam-svn/Makefile.save to Makefile
delete folder opensll*
delete folder libusb*

quick start guide:
checkout oscam-svn
place make.sh in
cd oscam-svn
./make.sh
do "12"
do "11"
make your choice
do "10"
wait...

update!
v0.2.2a
- fix typo on "13" "y"

elgeneral · Aug 22, 2010

v.0.2.3
- "build all": oneinall cfg fixxed!

marcel · Aug 22, 2010

update!
v.0.2.4
- EASY-SCRIPT ONLINEUPDATE ACTIVATED!
Zitat:
#####################################
Oscam-Easy-Script v0.2.3
Easy-Config
#####################################
1) DUO-CORE-CPU ? (OFF)
2) ONEINALL-CONFIG ? (ON)
3) WEBIF ? (ON)
4) LIB-STAPI ? liboscam_stapi.v0.03b.a
5) LIBUSB ? (OFF)
6) DD-WRT 3.4.6-uclibc-0.9.28 ? (OFF)
7) SVN CHEKOUT OLDER REV ? actual: (2948,2948 )
8 ) Easy-Menu SETUP ?
9) UPDATE EASY-SCRIPT
10) Cleanup 'BUILD-Folder' ?
11) Delete ALL Logfiles+EasyInfo ?
12) DistClean OSCAM-SVN ?
*) Back to MAIN-MENU
#####################################

Select target (1-12) ? 9
Watch online for EASY-UPDATE (y/N) ? y

VERSION-ONLINE=v0.2.4, LOCAL-VERSION=v0.2.3
UPDATE EASY SCRIPT WITH ONLINE-VERSION (y/N) ? y

UPDATE DONE, restart make.sh...
#####################################
Oscam-Easy-Script v0.2.4
Main-Menu
#####################################
1) Do svn up

PLEASE READ "MANUAL.PDF" FIRST!!!

marcel · Aug 23, 2010

Since OSCam-EASY-Script v0.2.4 ...
update by online-update-option:
main-14-9

changelog.txt:
Zitat:
v.0.2.5
- new menu add: main-14-10 "HowTo's/Changelog"
(non ubuntu-user:
change make.sh line 16: PDFVIEWER="evince"
to your prefered pdf-viewer!)
#####################################
Oscam-Easy-Script v0.2.5
HowTo's / Changelog
#####################################
1) Show Changelog ?
2) Show EASY-Manual.pdf ?
3) Show OSCam-Config example ?
4) Show OSCam-WIKI ?
5) Back to EASY-BUILD-CONFIG-MENU

juli13 · Aug 23, 2010

OSCam Easy Build Script 0.2.6a

23/08/2010

v.0.2.6a
- On onlineupdate set EasyBuild.conf to default
- moved "PDFVIEWER=evince" to EasyBuild.conf

marcel · Aug 24, 2010

v.0.2.7
- add Fedora, Opensuse, Debian support! Please test!!
- manual updated
- sh4-toolchain build logfile fixxed

marcel · Aug 24, 2010

v.0.2.8
- small dd-wrt fix
- ppc-dreambox(500,600,7020)/Dbox2 add

if problems after updating:
delete EasyBuild.conf
rm oscam-svn/Makefie
rename oscam-svn/Makefile.save to Makefile
and restart script again!

marcel · Aug 25, 2010

v.0.2.8a
- lib_oscam_stapi_v0.03c added

if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

juli13 · Aug 25, 2010

OSCam Easy Build Script 0.2.9

25/08/2010

Code:

[B]v.0.2.9[/B]
- mips-fonera/atheros add
- manual.pdf updated
- small fix i386/x64 pc

if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

marcel · Aug 26, 2010

Since OSCam-EASY-Script v0.2.4 ...
update also available by online-update-option:
main-14-9

changelog.txt:
Zitat:
v.0.3.0
- MIPSEL-AZBOX add
- some code fixxed
- manual.pdf updated

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX

marcel · Aug 26, 2010

v.0.3.0a
- easy-info: azbox fixxed

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX

juli13 · Aug 27, 2010

27/08/2010

v.0.3.1
- new submenu: "build single oscam"
and moved main-menu 2 - 9 in
(for datails watch manual.pdf)
- libstapi config menu fixxed
- manual.pdf updated
- some output info corrected

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX

if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

juli13 · Aug 28, 2010

28.08.2010

Code:

[B]v.0.3.2[/B]
- ARM-DOCKSTAR add
- small code fix
- manual.pdf updated

[B]Actual supported build-platforms:[/B]
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0


[B]Actual supported host-platforms:[/B]
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR



[B]if problems after updating:[/B]
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

juli13 · Aug 29, 2010

29.08.2010

Code:

[B]v.0.3.3[/B]
- dockstar: libusb fixxed
- pcsc add for pc + dockstar only
(only single build!)
- no menuconfig needed now on dockstar + freetz!

[B]Actual supported build-platforms:[/B]
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0


[B]Actual supported host-platforms:[/B]
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR

[B]if problems after updating:[/B]
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

juli13 · Aug 30, 2010

30.08.2010

Code:

[B]v.0.3.3a[/B]
- fritzbox fixxed (make menuconfig back, without no build!)
- some smal other code fixxes

[B]Actual supported build-platforms:[/B]
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0


[B]Actual supported host-platforms:[/B]
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR



[B]if problems after updating:[/B]
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
and restart script again!

marcel · Aug 31, 2010

v.0.3.4
- fritzbox: pcsc added (single build only!)
- dockstar: code fixxed
- onlineupdate: BUILD folder save/copy/insert added
- duocore option deleted (hopeless not working!)
- coolstream build fix

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR

if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
mv ./BUILD ./BUILD_old
and restart script again!

marcel · Aug 31, 2010

v.0.3.4a
- fix coolstream

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR

if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
mv ./BUILD ./BUILD_old
and restart script again!

juli13 · Aug 31, 2010

31.08.2010

Code:

[B]v.0.3.4b[/B]
- fix build all

[B]Actual supported build-platforms:[/B]
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0


[B]Actual supported host-platforms:[/B]
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR



[B]if problems after updating:[/B]
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
mv ./BUILD ./BUILD_old
and restart script again!

baha2 · Sep 2, 2010

02.09.2010

Code:

[B][COLOR="Red"]v.0.3.6a[/COLOR][/B]
- fix dockstar libusb
- fix coolstream libusb
- fix build all

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0


Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR

f problems after updating:
rm /EasyBuildScript/ EasyBuild.conf
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
mv ./BUILD ./BUILD_old
for coolstream build: if old toolchain build please delete them first!
and restart script again

juli13 · Sep 3, 2010

03.09.2010

Code:

[B]v.0.3.7[/B]
- optimized and simplyfied BUILD/oscam*-names for easier identifying

Actual supported build-platforms:
UBUNTU >= 9.10
DEBIAN
FEDORA >= 9
OPENSUSE >=11.0

Actual supported host-platforms:
ARM-COOLSTREAM
MIPSEL-FRTIZBOX
MIPSEL-DREAMBOX
PPC DREAMBOX/DBOX2
MIPSEL-DD-WRT
SH4-DVBAPI
SH4-STAPI
I386/X64 PC
NSLU2 UNSLUNG
MIPS-FONERA/ATHEROS
MIPSEL-AZBOX
ARM-DOCKSTAR



if problems after updating:
rm /EasyBuildScript/ EasyBuild.conf 
rm Makefie
mv Makefile.save Makefile
rm -rf /stapi
mv ./BUILD ./BUILD_old
for coolstream build: if old toolchain build please delete them first!
and restart script again!

OSCam Easy Build Script (script only!)

Registered