Please help Ariva 102E

AlexR6 said:

Please you can help me to installing EMU on ariva 102E.
Thanks for all

Click to expand...

(1) Decompress the ZIP-file and copy software file to the root directory of the USB portable
memory.
(2) Plug USB portable memory into USB port of receiver.
(3) Go to Menu->Tools->Upgrade By USB

(4) As upgrade mode please choose: Allcode+bootloader
(5) Select desired software file
(6) Press start to upgrade receiver

(7) Please wait... After upgrade done successfully receiver will reboot automatically


Due to fact that new software don't contain any user data base (channel list), as last step
you have to check antenna settings and search satellite or upgrade receiver with desired channel list.

Here is a section of the receiver HD ****
http://www.sat-universe.com/forumdisplay.php?f=401

AlexR6 said:

Yes, ok and after........
i Have installed this patch but after the other steps??

Click to expand...

Edit and Upload the keys to ARIVA ****> http://www.sat-universe.com/showpost.php?p=856242&postcount=3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Loading shares data from USB

Receiver software enable to load all sharing settings directly from simple text file.
Text file name must be set to: allshares.dat and look like:




To update all sharing settings from file go to → Upgrade By USB and choose:



'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Card sharing over LAN on Ariva based M3606 by NewCamd

Solution support up to 4 client in LAN connection:




Server

1. Change MAC address, save, shutdown restart, and remember to
plug-in card!

2. Set NewCamd Server and press red button to configure.

3. Set server port 8000 (recommended), user name and password.
Default DES key is
01020304050607
08091011121314
4. Press the start button, open the server, button will become a
stop (second press will shut down the server). Do not press stop,
EXIT to main menu or other operations, such as watching television



''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Client

1. Change MAC address, save, shutdown restart!

2. Set NewCamd Client and press red button to configure.

3. Enter the server's IP and PING to check LAN connection first.

4. If success than enter port, user name, password, etc.

5. Login and through NewCamd agreement, you can watch TV




In the server side you will find “connect success” it illustrate the success of the client
connections.

AlexR6 said:

On my decoder i don't see "flash config". i don't can install the file allcode.db
I see defaultDB and userdb on the upgrade mode but don't install it.
Where is the problem.

Click to expand...

to update all the files must be copied directly onto the memory stick, can not be placed in folders

memory stick > allshares.dat (OK)
memory stick > allshares > allshares.dat (NO)

AlexR6 said:

Yes the file is directly on the usb stick
but when i use the file allcode.dat
i search:
allcode+bootloader--------no file
HS17----------------------no file
maincode------------------no file
seecode-------------------no file
radioback-----------------no file
ariva 102e----------------no file
seeback-------------------no file
data1---------------------no file
data2---------------------no file
defaultdb-----------------no file
userdb--------------------no file
dump_factory--------------dump_factory.abs
dumpfile------------------dumpfile.abs

i see all file on my usb but no "allcode.dat"
y don't know????

Click to expand...

you must first upload, A102E_20110922_1.10B4_patch

AlexR6 said:

i see all file on my usb but no "allcode.dat"
y don't know????

Click to expand...

This file is to be allshares.dat

keys = key.db
setting = user.db or default.db

Test

About STB with ALI M3606C

Hello!

I'm interested in firmware loader for my 1080P STB, also based on ALI M3606C. Model: AZ America S920HD, it's is double turner model, for SKS... and the TEAM (developers) offer IKS for Satt on 70ºW and 61ºW, to buyers (about 180ch brazilian dedicated programation, 25HD), free of charge.

But, the manufacturer isn't release loader from this new model of this STB yet.
Just start the sale with some buged firmware... Now, I have problems and need recovery it.

Someone knows if other LOADER could works on it??

Some pics:










Thanks!


P;S.: sorry my poor, very poor english...

JAKITAKI said:

http://www.sat-universe.com/showthread.php?p=859015

Click to expand...

Thanks for reponse. But this files I already have.

Explained better:

I need a DUMP/CHANNEL editor that works with ALI M3606C, because the manufacturer AZ America, not release it.

I have another AZ America model S900HD, with chip ALI M3602. But that dump editor is not compatible with S920HD (ALI 3606C), the dump created is not aceptted on S920HD, understand?

Maybe, any channel/dump editor of the any STB running ALI M3606C will be compatible??

Thanks in advance... and sorry my english!!

thxxxxxx

Hi guys i just baught a ferguson ariva 102e can you please sugest me the last fw for this dec thank you.

For setting and list channel ita 13E you can find on ebay... is good and with ita channel

bn jr a tt svp le flachage de ferguson ariva 102e

Is it possible to convert "vhannibal" channel list to an ariva decoder?