NEW:
(Standard OSCam use another way)
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable
And for reader "Emulator" please set emmcache to "1,1,2,1"
Live-Log:
Now row for search-strings are variable and with beep for a positive event
Polling:
Polling can be paused now
EMU:
Now with support for PowerVU and Drecrypt2
BISS/ConstCW config
===================
Syntax for keys in SoftCam.Key: (key number can be '00' or '01')
F <service id><ecm pid> <key number> <key>
Example:
service id: 2222
ecm pid: 1111
key: 0102030405060708
F 22221111 00 0102030405060708
Important:
The correct ecm pid is only available when using oscam dvbapi.
For example:
oscam (dvbapi) <-> OSEmu
oscam (dvbapi) <-> oscam <-> OSEmu
When using another client like cccam, the ecm pid seen by OSEmu will always be '1FFF'
For example:
cccam <-> oscam <-> OSEmu
cccam <-> OSEmu
In this case the above example key line needs to be changed to:
F 22221FFF 00 0102030405060708
PowerVU config
==============
Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677
AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677
For PowerVU the Stream Relay must be used:
IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.
For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize
If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.
When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.
Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)
IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.
Note:
When using DreamBoxEdit:
A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
Drecrypt2 config:
=================
IMPORTANT:
Drecrypt2 support is experimental at the moment.
Most likely you will encounter problems, which need to be fixed first.
Keys in SoftCam.Key:
D <caid><provider> <key type><key index> <key>
example:
D 4AE1FF AA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF
AU keys:
D <caid><provider> MK<key type><key index> <key>
example:
D 4AE1FF MKAA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF
(Standard OSCam use another way)
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable
And for reader "Emulator" please set emmcache to "1,1,2,1"
Live-Log:
Now row for search-strings are variable and with beep for a positive event
Polling:
Polling can be paused now
EMU:
Now with support for PowerVU and Drecrypt2
BISS/ConstCW config
===================
Syntax for keys in SoftCam.Key: (key number can be '00' or '01')
F <service id><ecm pid> <key number> <key>
Example:
service id: 2222
ecm pid: 1111
key: 0102030405060708
F 22221111 00 0102030405060708
Important:
The correct ecm pid is only available when using oscam dvbapi.
For example:
oscam (dvbapi) <-> OSEmu
oscam (dvbapi) <-> oscam <-> OSEmu
When using another client like cccam, the ecm pid seen by OSEmu will always be '1FFF'
For example:
cccam <-> oscam <-> OSEmu
cccam <-> OSEmu
In this case the above example key line needs to be changed to:
F 22221FFF 00 0102030405060708
PowerVU config
==============
Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677
AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677
For PowerVU the Stream Relay must be used:
IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.
For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize
If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.
When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.
Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)
IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.
Note:
When using DreamBoxEdit:
A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
Drecrypt2 config:
=================
IMPORTANT:
Drecrypt2 support is experimental at the moment.
Most likely you will encounter problems, which need to be fixed first.
Keys in SoftCam.Key:
D <caid><provider> <key type><key index> <key>
example:
D 4AE1FF AA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF
AU keys:
D <caid><provider> MK<key type><key index> <key>
example:
D 4AE1FF MKAA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF