Tutorials for Qbox / Mini HD

elgeneral

Registered
Messages
7,811
How to:
- Turn the receiver off.
- Unzip the file.
- Read the readme file.
- Copy the qboxhd_update folder in a usb stick.
- Put the usb stick behind the receiver in a USB port.
- Power ON the receiver.
- Wait until you see the update is done on the display.
- Remove the USB stick.
- Restart the receiver.

Using this update all your receiver configuration will be lost.
 

elgeneral

Registered
Messages
7,811
Actualizacion QBox HD

Actualizacion QBox HD

We will use the software Duolabs Qbox HD 1.0.2 Updater

UPDATE ON STAGE 1:
Actualizacion QBox HD

Define connection parameters, so the IP of your Qbox-Hd and password to connect:

Login = root
Pass = qboxhd

To test whether there can be communication:
conexion.jpg


So far this list ready to send the update, press the Update icon Qbox-HD, for the rest sobran comments:
qboxhd102.jpg

onoffbutton.jpg

updatecomplet.jpg


UPDATE ON STAGE 2:

The second and equally simple step, you need a USB key formatted (FAT, FAT32), or will put the files l 'image, an outstanding attention qboxhd_update d directory' there put the two files as shown below.
archivo1.jpg


archivo2.jpg


Now remove your USB key and puts it over the Qbox-HD as shown in the photograph (the terminal is turned off)

usbupdate.jpg


Turning the Qbox-HD and see the small LCD on the update done, wait a minute (3 to 5 minutes), then the terminal will return to put in place to make completely solo.Volver feed Qbox-Hd ( do not forget to remove the wash USB)

update1j.jpg

...sbcompletf.jpg


Perfect Upgrade went well.

nuevaimagen.jpg




Translate document spain
 

elgeneral

Registered
Messages
7,811
Configuration Ftp Qbox-hd

CONFIGURATION FTP QBOX-HD

Code:
Ip = xxx.xxx.xx.x
Login = root
Password = qboxhd
qboxhdpar4.jpg


Thanks a Subsilver
 

elgeneral

Registered
Messages
7,811
Configuracion Telnet Qbox-hd

CONFIGURACION TELNET QBOX-HD

Code:
Ip = xxx.xxx.xx.x
Login = root
Password = qboxhd
qboxhdpar5.jpg


Thanks a Subsilver
 
Last edited:

elgeneral

Registered
Messages
7,811
How to restore the original filesystem in the USB Stick

How to restore the original filesystem in the USB Stick:thum:

19th june 2009
 

elgeneral

Registered
Messages
7,811
How to use VLC as Media Streamer and configururation for YouTube® and YouPorn® Plug-in

How to use VLC as Media Streamer and configururation for YouTube® and YouPorn® Plug-in

23nd june 2009:)
 

kiliantv

Super VIP
Messages
7,057
Tutorials for the Q-Box HD

Tutorials


Tutorial # 1 – “How to restore the original filesystem in the USB Stick”

Tutorial # 2 – “How to get a logs from the QBoxHD”

Tutorial # 3 – “ How to use VLC as Media Streamer and configururation for YouTube and YouPorn Plug-in”

Tutorial # 4 – “How to update the QBoxHD"
 

elgeneral

Registered
Messages
7,811
The oficials 5 Tutorials version spain

11 julio 2009

These manuals are translated and adapted by elgeneral from oficial Site


Tutorial # 1 – “Como restaurar el USB para el nuevo filesystem”

Tutorial # 2 – “Logos en QBoxHD”

Tutorial # 3 – “ Como usar y configuarar el VLC Media Streamer para YouTube® y YouPorn® Plug-in”

Tutorial # 4 – “Manual actualización QBoxHD”

Tutorial # 5 – “Como ajustar los canales (Settings) en QBoxHD”


Big Thanks for people Duolabs for manuals :thum:
 

elgeneral

Registered
Messages
7,811
How to use NetworkBrowser QboxHD and share DISK with share name d (tutorial by Matrix nabilosat)

:thum:
 

elgeneral

Registered
Messages
7,811
How to Qbox Mini HD

How and what do I do when I get the big Q-Box Mini?
HELLO EVERYONE!

Here's to all the "beginners" (not!) Some simple guides:
- Update the filesystem via USB,
- Settings on the first boot
- Download the lineups.

I hope we can help! ;)

Update file system via USB:

  • 1. Connect the decoder to your TV and satellite plant;
  • 2. Do not remove the usb stick from the decoder supplied (in case of suspected damage to the stick, the formatting is recommended in "FAT32" using a PC or replacement with a new key);
  • 3. Download the latest update from www.qboxsvn.com / filesystem;
  • 4. Unzip the *. rar file you just downloaded a program with eg winrar;
  • 5. Qboxhd_update save the folder onto a USB stick;
  • 6. Put the usb stick in receiver and turn it on;
  • 7. The update will start automatically and will end when the TV in the classic menu wizard.
  • 8. Remove the memory stick inserted for the update.

Settings menu wizard:

The first time the decoder will be asked for basic settings.
  • 1. Choose the language;
  • 2. Set your type of facility

ES: One Feed (HOTBIRD)
Mode config. Simple
Single Mode
Satellite Hot Bird 21 13.0E
No InviareDiSEqC

ES: Dual Feed (HOTBIRD + ASTRA)
Mode config. Simple
Mode DiSEqC A / B
Port A Hot Bird 21 13.0E
Port B 23 Astra 19.2E
Config. Volt. And Yes 22KHz
InviareDiSEqC ... No

  • 3. Search channels optional.

If you intend to download a list of channels you do not need to search.


Installing Addons (Lineups, etc.)

  • 1. Connect the power cable and turn on the decoder (or set the network settings menu);
  • 2. Press Menu / Setup Menu / addons, download AddOns (green button), Duolabs Ok;
  • 3. To list channels go to "Settings" and select your setting
  • ES: DUALFEED / Vhannibal DUALFEED 13-19 East
  • OK
  • 4. Confirm the various questions by pressing OK or the green button when prompted.
  • 5. Repeat the process with other AddOns that you want.
  • 6. When finished, exit the menu by pressing "Exit".
  • 7. You may need to restart the decoder (to be performed by the menu!).


RECOVERY QBOX MINI HD

If the decoder does not respond and hangs on boot or reboot constantly must be made to restore the system with one of these ways:
Download and install the latest version of the program for Recovery "QBoxHD_Updater" from the website www.qboxsvn.com

First way:
  • 1. Connect the receiver to the LAN with a LAN cable normal;
  • 2. Temporarily remove the firewall to protect your PC (Firewall active can cause lack of communication between your PC and QBoxHD MINI);
  • 3. Open the software "QBoxHD Updater";
  • 4. In settings make sure it is set to the ip of the pc (ie 192.168.0.3) and how to set ip QBOX any free ip (eg 192.168.0.40)
  • (ONLY THE FIRST START, then to change these settings, press the "Program Settings");
  • 5. Save the settings, press the "Show Console";
  • 6. Press the "Recovery";
  • 7. Turn on the receiver while holding down the front of the Q-Box HD MINI;
  • 8. When prompted, select the *. QHU (Al 01/12/10: "qboxhd_boot_update_2010_05_10.QHU" with Q-Box HD, "qboxhd_mini_boot_10_06_2010.QHU" with Q-Box Mini HD);
  • NB: The files will find them in the folder from where it started the setup or can be downloaded from the site www.qboxsvn.com.
  • 9. In about 10 seconds recovery should begin;
  • 10. Once the recovery to proceed with updating the file system via USB.

Second way:

  • 1. Connect the decoder to the PC directly to a normal LAN cable;
  • 2. Set the PC a static IP (eg 192.168.0.3);
  • 3. Temporarily remove the firewall to protect your PC (Firewall active can cause lack of communication between your PC and QBoxHD);
  • 4. Open the software "QBoxHD Updater";
  • 5. In settings set the ip of the pc (ie 192.168.0.3) and as a decoder ip any ip (eg 192.168.0.40)
  • (ONLY THE FIRST START, then to change these settings, press the "Program Settings");
  • 6. Save the settings, press the "Show Console";
  • 7. Press the "Recovery";
  • 8. Turn on the receiver while holding down the front of the Q-Box HD MINI;
  • 9. When prompted, select the *. QHU (Al 01/12/10: "qboxhd_boot_update_2010_05_10.QHU" with Q-Box HD, "qboxhd_mini_boot_10_06_2010.QHU" with Q-Box Mini HD);
  • NB: The files will find them in the folder from where it started the setup or can be downloaded from the site www.qboxsvn.com.
  • 10. In about 10 seconds recovery should begin;
  • 11. Once the recovery to proceed with updating the file system via USB.


Mil gracias a bambabo
 
Top