PowerVu Chat [only chat, don‘t post keys here]

fmoreira

fmoreira

Registered
Messages
249
skyscan said:
Try the suggestions here (in blue) - worked for me.
Click to expand...

Thanks for your answer...

I already use those settings!!

Until today I was using previous version (OSCam-Emu version 775 - revision 11438). Everything was working ok with auto update (Afn and Sis).

After i change to version 776 Afn continued to work fine with auto update but Sis stopped...

It could be some change on Power Vu used by Sis?
 
fmoreira

fmoreira

Registered
Messages
249
T

technodvl2

Registered
Messages
251
anyway

sis

SPANISH -pvu2

works without any key
and has done for months

whichever way you want to view it

stream relay or without

and here just updated
6qvgbq.jpg
 
Last edited:
S

skyscan

Registered
Messages
36
naja said:
It could be some change on Power Vu used by Sis?
Click to expand...

No.
I changed to the same Oscam-Emu version, and AU is working fine (after updating settings) on the PV providers I tested, including SIS.

If you are sure it isn't a settings issue, try cleaning your keyfile of old keys. Worth a try.
 
N

nautilus7

VIP
Messages
607
naja said:
Thanks for your answer...

I already use those settings!!

Until today I was using previous version (OSCam-Emu version 775 - revision 11438). Everything was working ok with auto update (Afn and Sis).

After i change to version 776 Afn continued to work fine with auto update but Sis stopped...

It could be some change on Power Vu used by Sis?
Click to expand...

Only change was the emm key capacity increase.

What is the sis channel you're trying to auto update? What emm keys do you use? Also post a livelog.
 
fmoreira

fmoreira

Registered
Messages
249
Thanks for your answers...

I am not home to provide logs and check info... But before I left I try Sis auto update with a image backup I made before I change to rev775... And auto update work well...

This back up had only 3 differences for my actual image : oscam bin, reader configuration (do not have disablecrccws_only_for = 0E00:000000 setting) and softcam.key (do not have the keys from auto update from November from Afn and sis)

Tomorrow I will try follow your advices and provide a log
 
Last edited:
fmoreira

fmoreira

Registered
Messages
249
I have two readers on oscam.server

This is my present configuration (worked ok with SIS and AFN auto Update until the update to the last OScamEmu version. Now only works on auto update on AFN)

I appreciate if someone could validate if this settings are ok:



[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
disablecrccws_only_for = 0E00:000000


Thanks!!
 
Last edited:
N

nautilus7

VIP
Messages
607
Like you were said in the other forum, you need the disablecrccws_only_for = 0E00:000000 in ALL your powervu readers, so they work properly.
 
fmoreira

fmoreira

Registered
Messages
249
nautilus7 said:
Like you were said in the other forum, you need the disablecrccws_only_for = 0E00:000000 in ALL your powervu readers, so they work properly.
Click to expand...


Sorry, i made a copy/past from a hold backup ...

In my present oscam.server both readers have the disablecrccws_only_for = 0E00:000000 command...

First reader correction:

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:00000 0
disablecrccws_only_for = 0E00:000000
 
Last edited:
R

Robertooo

Senior Member
Messages
5,689
How should I write AFN EMM keys in softcam.key file for 9.0 E and for 34,5 W?

When I write them with P 0009 ident then they're OK at 9.0 E but not OK at 34,5 W.
 
S

Shamra

Registered
Messages
196
Robertooo said:
How should I write AFN EMM keys in softcam.key file for 9.0 E and for 34,5 W?

When I write them with P 0009 ident then they're OK at 9.0 E but not OK at 34,5 W.
Click to expand...
Probably because @34.5°W other srvid parameters and for this satellite need to create a separate group of keys in the SoftCam.Key.
 
R

Robertooo

Senior Member
Messages
5,689
Shamra said:
Probably because @34.5°W other srvid parameters and for this satellite need to create a separate group of keys in the SoftCam.Key.
Click to expand...

I've tried with other ID too (P 0345) but not OK.

Is it possible to watch MTN package on 4132 R 30000 frequency?
 
S

Shamra

Registered
Messages
196
Robertooo said:
I've tried with other ID too (P 0345) but not OK.

Is it possible to watch MTN package on 4132 R 30000 frequency?
Click to expand...
You need to see what srvid the AFN channels on this satellite, and in accordance with this to create a new group keys for these channels with separate identification.
That is, you should have two sets of keys for the AFN, one for @9.0°E, the second for @34.5°W.
Sorry, unfortunately I do not accept satellite @34.5°W and cannot verify.
 
Last edited:
T

technodvl2

Registered
Messages
251
Robertooo said:
How should I write AFN EMM keys in softcam.key file for 9.0 E and for 34,5 W?

When I write them with P 0009 ident then they're OK at 9.0 E but not OK at 34,5 W.
Click to expand...



with the oscam.services for AFN 34,5 W

any ID you want as long as its not being used

and reader to them services

i would run oscam with them only



good luck

i have never seen keys or services for 34.5w
 
fmoreira

fmoreira

Registered
Messages
249
nautilus7 said:
Like you were said in the other forum, you need the disablecrccws_only_for = 0E00:000000 in ALL your powervu readers, so they work properly.
Click to expand...

skyscan said:
Try the suggestions here (in blue) - worked for me.
Click to expand...

skyscan said:
No.
I changed to the same Oscam-Emu version, and AU is working fine (after updating settings) on the PV providers I tested, including SIS.

If you are sure it isn't a settings issue, try cleaning your keyfile of old keys. Worth a try.
Click to expand...


Auto Update are now working ok on AFN and SIS!

I Kept last oscamEmu version and all my settings. The only change I made was to delete from the softcam.key the November keys coming from auto update.... was probably a old key interference problem!!

Thanks!!
 
fmoreira

fmoreira

Registered
Messages
249
nautilus7 said:
Like you were said in the other forum, you need the disablecrccws_only_for = 0E00:000000 in ALL your powervu readers, so they work properly.
Click to expand...

skyscan said:
Try the suggestions here (in blue) - worked for me.
Click to expand...

skyscan said:
No.
I changed to the same Oscam-Emu version, and AU is working fine (after updating settings) on the PV providers I tested, including SIS.

If you are sure it isn't a settings issue, try cleaning your keyfile of old keys. Worth a try.
Click to expand...


Auto Update are now working ok on AFN and SIS!

I Kept last oscamEmu version and all my settings. The only change I made was to delete from the softcam.key the November keys coming from auto update.... was probably a old key interference problem!!

Thanks!!
 
You must log in or register to reply here.
Top