New patch for TM-8000 HD Combo

juli13

Staff member
Administrator
Messages
10,194
Here is the first Phantompatch for technomate TM 8000 HD

At the pictures are all the Specification of the TM-8000 HD Combo.
 

tani1

Staff member
Super Moderator
Messages
17,767
New Phantompatch for TM-8000 Series - 14-07-2010

Flash Via USB
Go to system info screen and press 2011, after patch activated, menu can be accessed by pressing mute then exit

Working with newcamd and cccam Plus 'extras'
 

elgeneral

Registered
Messages
7,811
9.08.2010

PHANTOM_TM8000_9AUG2010.tbn


1- TV Globo issue solved using softcam key.
2-updat by LAN
go to systemsetting/ip setting
 

juli13

Staff member
Administrator
Messages
10,194
Phantompatch TM-8000 HD Combo 20.08.2010

Code:
[B]20-08-2010[/B]

1. in the Blind Search Menu 
Symbolrate => STEP SCAN, FAST/DETAIL => FAST(3MHz)/DETAIL(5MHz)
3Mhz and checking freq is 10800, It will be checked
10799,10800,10801 in one time.
If you select 5Mhz and checking freq is 10800, It will be checked
10798,10799,10800,10801,10802 in one time. Therefore IMhz and 2Mhz step is not needed.
2. In blind searching menu.
"freq-pol-symbol" display is changed to "freq-pol-symbol-s1/s2-FEC value".
3. In banner of no menu.
PID value display area is changed to " S1/S2 - FEC Value".
this tuner will make channels automatically without S1/S2 and FEC value information.
Therefore stored TP information do not have this S1/S2 and FEC value.
First time, if you change to channel, This information(S1/S2 and FEC value) will be changed 
to correct value when banner is displayed.
This changed information is saved when user power off by Remote controller.
4. Polish language is added.
5- In advanced search menu.
no need to add TS type(S1/S2) and Modulation type(FEC value).
tm-8000 tuner search this TS type and Modulation automatically.
no need of inserting any value.
6. When Video format change, Rebooting issue.
Solved.
 

bozomustafa_68

Registered
Messages
16,935
Phantompatch-TM-8000-HD-27Feb2013


Code:
Fixed.
1-Rebooting
2-press yellow button 0000 to view and add edit.
3-Menu/system setting/ip setting/connect-update patch/channel list/key by lan
4-Ci+ fixed
5-increas channel change speed.
6-signal sensitivity improved
7-channel sorting fixed.
8-Epg improved.
 

bozomustafa_68

Registered
Messages
16,935
Phantom Patch_TM-8000Ci+_14Jun2013

Code:
Updated Issue]

Fixed.

1. local c/s issue 1( 9.0E Astra1 11895-v-27500, 12402-v-27500) 
2. blind scan issue
3. process a/v message
( No Audio/Video, No signal, Scrambled)
4. deletion old channel data after scanning
if transponder found it's channel when scanning, it is cleared old channels data of this TP.
5. data channel scanning option.
I inserted option "Search data channel" at osd setup menu.
If this item made to "YES", You can search all data channel without video/audio data. 
6. update recall functionality 
recall funciton operate between satellites.
7. Ci Channel
Ci CAM initializing didn't success at FTA Channel.
Ci MMI Message box is updated.
8. Favoirte Mode is updated..
9. Via, code is updated for EMM auto.
 

bozomustafa_68

Registered
Messages
16,935
Phantompatch-8000Ci_07Nov2013

Updated as below
1- New TP update list of all satellite.(Please make new channel
list using an attached software for upload ftp server)
2- Free CAS Sorting by Soft cam any channel open by soft cam key will display green }press ok/blue button/free cas see green symbols .
3- AC3 Audio
4- 5-West ATLANTIC Bird 3_10972_V_29500.trp : This TP have AC3 flag but no AC3 Stream. Fixed.
5- Installation Part Control by front key
5- Old patch use a key data in patch code and changed key is not adjust to descramble
This software is modified to use softcamall.key data for TNT Sat France.
============================
There has been lots of fundamental changes in this patch.
After downloading this patch you have to factory reset and scan new channel list.
 
Top