Miscellaneous-DM7025-Images

Rocknroll

Staff member
Administrator
Messages
6,174
7025 COLOSSEUM IMAGE 1.1
build date 01/07/2006


CVS:
Enigma2 CVS 01.07.2006 (with Timeshift exit fixed ;-)
Secondstage v #45
satellites XML 18/06
Picture in Picture
MediaPlayer (VOB and MPG included)
TeleText
C.I. fixed
Enigma1 like Radio Mode (new!)

TuxboxCommander 7025 INCLUDED (new!!)

Nemesys Blueline skin INCLUDED (4 skins!!)


Colosseum Image Exclusive Features

- EPG Browser 1.1
Licence Granted from the original Author in June 2006, thanks for the sources

- Colosseum Control Center
- Manual install from /tmp
- Uninstall addons
- Skins manager
- Hard Disk setup

- COLOSSEUM SMART STREAMING (NEW!!)
Auto run VLC and auto set-up current channel for streaming!
Just ZAP to any channel with your RC and VLC will start immediately to stream it!

NO EMUS / NO KEYS
 
Last edited:

Rocknroll

Staff member
Administrator
Messages
6,174
Colosseum 1.2

OE Build Configuration:
BB_VERSION = "1.3.0"
OE_REVISION = "feffecbe7b7bd979d907e3681928bda43a855908"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm7025"
DISTRO = "opendreambox"
TARGET_FPU = "soft"


CVS:

- Enigma2 CVS 15/07/06 (modified by CTEAM)

NEWS:

- CCC panel (Colosseum Control Center) new activation:
BLUE Key (short press) = CCC panel
BLUE Key (long press) = Extensions window (PiP, subtitles, etc.)


COLOSSEUM EXCLUSIVE NEWS:

- PiP: quick swap between PiP service <-> main TV service with 0 (zero) key
When PiP is enabled, you can swap PiP<->TV services by pressing the 0 (zero) key
When PiP is disabled, the 0 key returns to its standard function

- Movieplayer: remember last position when exiting !!
When you exit from Movieplayer back to TV, the current playing position is saved.
Then, when you start to watch the recorded movie again, you will be asked to restart from the last position, instead of from the beginning.
If you answer YES the vision will restart from last saved position
If you answer NO the vision will restart from the beginning
(The movie position is saved only after the first minute of length.)

- OSD Setup (CCC panel)
You can now set both the OSD display timeout (default: 4 sec) and the VOLUME bar display timeout (default: 1 sec)

- Advanced Infos (CCC panel)
The "Advanced Infos" window is now automatically refreshed every 5 seconds.


- SmartStreaming 0.2 beta:
Added support for displaying current Event name and Event descryption on remote PC


- SKINS:
IMPORTANT: on latest CVSs the E2 Skin System has been totally renewed.
This means that old skins DON'T work on new CVS, as this image is.
Old skins must be recompiled and adapted by their autors.
So, in this image, it is included the Default Enigma2 screwed stone skin only, the only one that actually work.
 

atm

Registered
Messages
36
Colosseum 1.3 7025 Image..

CVS STANDARD FEATURES:

Enigma2 Opendreambox CVS 30.07.2006 (mod by CTeam)
Secondstage loader v #45
satellites XML Lyngsat 01/07
Picture in Picture
Subtitles
MediaPlayer
TeleText
C.I. fixed with multiple decoding
Alternative (Enigma1 like) Radio Mode
MHW-EPG enigma cache enabled

Nemesis Flatline Skin included, original version



BUTTONS SHORTCUTS:

- YELLOW BUTTON: (new!)
Short press = Plugins window
Long press = Timeshift start

- BLUE BUTTON:
Short press = CCC panel (Colosseum Control Center)
Long press = show Extensions (PiP enable and subtitles)

- ZERO (0) BUTTON:
If PiP (Picture in Picture) is active, the "0" button swaps
between main service and PiP service.
If PiP is disabled, the "0" button returns to its standard function.



COLOSSEUM EXCLUSIVE FEATURES:

NEW:

- INADYN SETUP (new!)
The first 7025 image with inadyn GUI setup.
You can easily setup and configure auto update for your IP on dyndns.org

- COLOSSEUM SMART STREAMING & ZAPPING (new!)
Version 0.5beta, full renewed and enhanced, with zapping included.
The most complete PC interface to your Colosseum image.
It automatically reads your favourites (bouquets and services), parse and display
them on your PC desktop. You can do ZAPPING to any 7025 channel without the
remote control, directly from SmartS&Z interface (just like on 7000's web interface!).
Then, you can stream the video on your PC, with auto-sense of channel zapping
and auto-restart of VLC player.
The program also displays the Service name, NOW event and NEXT event Title,
Start time, Duration, Descryption (full).
Advanced infos tab for current service is also provided, like on previous versions.

- Colosseum EPG BROWSER (new!)
Totally rewritten, incredible speed-up enhancement.
No more long time for parsing channels after epg download:
now epg is IMMEDIATELY available for browsing just after downloading.
No more huge memory leech (unlike the enigma mhw-epg built in cache ;-).
Epg Browser automatically zap to EPG data download channel (user definable), and
provides a smart interface to easily browse the EPG for any downloaded service,
and also can program the Timer for recording, including event descryption infos.

OTHER FEATURES:

- CCC panel 1.3 (Colosseum Control Center)
- Colossemu (softcam manager)
- Configured for zapping from remote PC
- Configured for streaming video to remote PC
- Skin manager (own release)
- Advanced infos for current playing service
- Manual install and remove of addons
- PiP swap services with 0 button

DOWNLOAD
 

atm

Registered
Messages
36
DaVinci Image for DM7025

CVS features:
- Enigma2 CVS 25.05.2006
- Secondstage v #44
- satellites XML 19/05
- TeleText
- MediaPlayer
- Multiple instant recordings


SDT features:

- SDT EPG Browser 1.0 !!! new !!!
The first MhwEpg automatic downloader/browser ever made for Enigma2, totally coded in Python
EPG download channel is easy configurable by the user thru the GUI interface
Direct Timer programming from the EPG details window
Recording start/end offsets in minutes (user definable)
EPG data file storing on all devices: hard disk, usb stick, or compact flash
New Epg data file structure, about 1 megabyte smaller than the original!
No need to reload data file every time you run the EPG Browser:
All data will be preserved (even in stand-by mode) for immediate access (until you restart enigma2)

- SDT Boss Panel v1.0
- Emuboss v1.0
- Manual install of addons from /tmp
- Uninstall addons
- SDT Skins manager - 4 skins included
- Hard Disk setup via SDT Boss panel

- Full italian translation by SDT Team (SDT Boss Panel included)
- Full french translation by Mimi74 included
- 4 skins by Mimi74 included + Default Skin

DOWNLOAD DAVINCI 2.0
 

Rocknroll

Staff member
Administrator
Messages
6,174
CVS Image for DM7025

Thx to dragon48:

-add "infobar timeout", "show infobar on channel change", "show infobar on skip forward/backward" options to Customize config
-change keys for activating/controlling PiP to color keys instead of number keys
-fix linked tuners option in tuner config,
fix tuner equal to X option in tuner config
-use "killall -9" instead of "killall" to apply restored settings
-fix more ConfigSatlist defaults
-fix bluescreen in manual scan
-fix bluescreen when pressing exit in alternative selection
-improve parental control retry count
-show radio (rds) text when available
-fix pip
-add enigma2 web interface
-add skinselector
 

ggiuseppe

Registered User
Messages
1,728
Neutrino Image for DM7025

Neutrino DREAM Plus v0.02beta/32bit-colorset for DM7025

**********************************************************************
NEUTRINO GUI DOES SUPPORT 1ST TUNER AND SECOND TUNER ON LOOP-CONNETION ONLY!
**********************************************************************

Welcome to Neutrino.DREAM Plus!

Neutrino.DREAM Plus v0.02beta/32bit-colorset
**********************************************************************
**Audioplayer**Movieplayer**PictureViewer**TS MovieBrowser**PIP*Yweb**
**Live-veiw by web**Timeshift**Auto-timeshift per channels zap**
**Muiti-EPG: TPS/D+/Sky Italia/Cyfra+*EPG cash*TuxBox Commander**
**Support gotoXX/USALS commands for DisEqC 1.2 motors**
**Bouquet editor**Virtual Zap**Zapit options menu**
**Manual scan per frequency**Movie-cutter**
**Acoustics spectrum lcd-analyzer**VNCviewer**Tuxmail**Tuxcal**
Lockales: deutsch, dutch, english, french, hungarian, italiano,
lithuanian, polski, portugues, russkij.

bonus: Links WWW Browser v2.1pre26/32bit-colorset w/usb-mouse support
bonus: LGames - LBreakout2, LTris, Kobo Deluxe

file: dm7025_n32plus_v0.02beta_20070304.nfi
md5sum: A52F7E6CAA85305011DBD5F42293AC05

Kernel 2.6.12.6
version=0001200703040002
comment=ruDbox ruDbox dream image
creator=ruDbox team

Original bootlogo by •Dream•Box•Busters•

There is 0.02beta-version of Neutrino.DREAM/32bit-colorset for dreambox dm-7025s.
**********************************************************************
WE'RE USING Neutrino.DREAM AS BASE IMAGE ON DREAMBOX!
FLASHING IS SAME AS DMM-IMAGE.
NEUTRINO GUI DOES NOT SUPPORT CI-CAM.
**********************************************************************
OUR Neutrino.DREAM Plus USING SPECIAL NEW CHANNELS-FORMAT SETTINGS.
YOU MAY TO EDIT CHANNELS-SETTINGS WITH DreamSet-EDITOR.
DreamSet - _http://mmedit9800.tripod.com.
Special thank to John Vossos for great support nplus-format!
**********************************************************************
*************

QuickNew.
-----------
1. Yweb v2.5.0
_http://www.yjogol.de
2. Time-Syncronisation
Main Menu, Settings, Network Settings, Syncronisation via - off/on
3. EPG search incl. Lower Case/Upper Case
Event-List/[red], [red]Evetlist current programm, [green]Search
4. Coloured Keys(buttons) can be configured
Main Menu, Settings, Key Setup, User menu: user menu for red/green/yellow/blue buttons
5. Set preferred EPG language
_http://www.hyper.fi/dbox2/sectionsd/
7. Temporary timeshift
Main Menu, Settings, Recording, direct recording settings, Temporary timeshift - off/on
8. Reboot added to main menu
9. added 2SUB - DVB subtitles
10. added Tuxmail
11. added Tuxcal - Calender
12. added VNC
13. Some test was made on UK-cable, seems it must to working

QuickStart.
-----------
1. Language Setup, Make your choice and press [Lame/Exit]
2. Main Menu, Settings, Network Settings, Make your choice and press [red]setup network now
3. Main Menu, Settings, Misc settings, Timezone, Make your choice
4. Main Menu, Settings, press [red]save settings now
5. Main Menu, Services, Zapit options, set necessary values and parameters, press [red]save settings
("Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6! "Tune timeout" - 20.)
6. Main Menu, Services, Servicescan, set necessary values and parameters, Scan mode: Fast!,
press [red]save settings, start scan
7. Main Menu, Services, Video Settings, Video system: PAL/PAL-M/NTSC
8. Main Menu, Services, Audio Settings, English: off/on
(auto-switch on english-soundtrack if the "English"-name is present on the channels)

TimeShift settings.
-----------
1. Main Menu, Settings, Recording Settings, recording device: direct(file)/off/server
(set to "direct(file)" and set direct recording settings[green], [red]activate changes)
2. Main Menu, Settings, Key Setup, Timeshift, setup new key
(most of keys is not free to use by default, set fee-key(example,bouquet+-) or change non-free
to free before start to set timeshift-key)
3. Main Menu, Settings, Movieplayer Settings, Timeshift pause: on/off
("on" - timeshift starting record and stop movieplyer to pause, "off" - timeshift starting record
and play continue)
4. Main Menu, Addons, Emu Type, Camd: no/mgcamd/newcamd/camd3/scam
(Timeshift supporting mgcamd/newcamd/camd3/scam emu for crypt-channels,
we're using mgcamd+newcs on dm-7025)
**********************************************************************
Question: How to switch on auto-timeshifting mode?
**********************************************************************
ANSWER: Main Menu/Settings/Recording/direct recording settings/Auto-timeshift start pause.
Set entry more than zero. 1 or 2 or 5... or 300.
Now at each zap channel record automatically will begin.
Auto-Record(files) of the previous channel will automatically delete at each zap channels.
Auto-timeshifting mode is a special mode of recording, but it can be switched on original record-mode.
Features menu/Move timeshift to records.

Scripts.
-----------
Main Menu, Scripts
1. Backup your settings - store your personal neutrino settings to
addon files, so next time just upload addon_restore.bin for installing all settings.
2. Load MHW epg - Muitiepg loader/TPS/D+/Sky Italia/Cyfra+
Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
Zapit to one of:
NOT TESTED! Canal+/CanalSatellite France : Astra 19.2E / 12363 V / 27500
NOT TESTED! Canal Digitaal : Astra 19.2E / 12515 H / 22000
WORKING! Digital+ : Astra 19.2E / 10847 V / 22000
WORKING! Sky Italia : Hot Bird 13E / 12418 V / 27500
WORKING! Cyfra+ : Hot Bird 13E / 10719 V / 27500
WORKING! TPS : Hot Bird 13E / 10892 V / 27500
3. Reset EPG
4. NOTIMEUPDATE
On different channels there is not an exact times. If there is a file /var/tuxbox/.notimeupdate
and the difference of more than 10 minutes, current time does not update.
5. Readme 1st/Image info

Default Keys(buttons)
-----------
1. [dream/menu] - Main Menu
2. [blue] - Features
3. [help] - channel info
4. [help][help] - channel EPG
5. [help][help][help] - channel EPG bigest font size
6. [help][help][help][help] - channel EPG normal font size
7. [info] - channel info (same as [help])
8. [video] - TS MovieBrowser
9. [audio] - Audioplayer
10. [green] - Select language
11. [red] - EPG Programm Information
12. [tv] at tv-mode - open clock on topleft, second press - close clock
13. [radio] at radio-mode - open clock on topleft, second press - close clock
14. [shift]+[radio] - saving live screenshot to /hdd/screenshots/channelname_programmname_yyyymmdd_hhmmss.bmp
(MTV2._[19E]_MTV2_S_100_TRACKS_OF_200620061231_141022.bmp)
15. [ok] - open channels-list
16. [ok]+[soundoff] - switch on dbv2000/channel-list mode
17. [shift]+[blue] - switch to standby mode and lock rc
18. [shift]+[tv] - lock scart
18. [red]+[unlock key] - unlock rc and scart
19. [shift]+[red] - switch on mini-mode: blocking main menu and features menu, second press - switch off
20. [soundoff] - del files and records

MovieBrowser special Keys(buttons)
-----------
[radio] - screenshot for record-logo
[shift]+[radio] - saving record screenshot as much as you have to press

Neutrino Movie-cutter.
-----------
Trimming-editing of the records material.

Mode-1. Set label " Movie end " for record (file).
Starting from this label the contents of record will be cut off
and thrown out" without of restoration.

Mode-2. Set labels " Movie start " and " Movie end ".
The contents of record between these two labels will be copied in a new file (record).
The original file (record) will not be changed.

Mode-3. Set label " jump over ".
If such label is installed, at usual viewing record the contents inside of a label is passed - ignored.
In our case the contents inside of a label will be written down (copied) in a new file (record).
Such labels inside of one record it is possible to set up to 10 and then we shall receive ten new records.
Differently the label " jump over " is a piece of record (file). Each of such pieces forms new record (file).
The original file (record) will not be changed.

Mode-4. Set labels " jump over ".
"Pasting" of all pieces in one record (file). The original file (record) will not be changed.

Arrangement of labels is carried out at viewing record in TS MovieBrowser by pressing the [blue]-button
and a choice of necessary type of a label.

Cutters Buttons on MovieBrowser.
-----------
[video] - Mode-1.
[audio] - Mode-2.
[text] - Mode-3.
[radio] - Mode-4.

Buttons fast rewind of record.
-----------
<1> - On 1 minute ago
<4> - On 5 minutes ago
<7> - On 10 minutes ago
<3> - For 1 minute forward
<6> - For 5 minutes forward
<9> - For 10 minutes forward
<2> - In the beginning of record
<5> - In the middle of record
<8> - In the end of record
PgUp - for 10 seconds forward
PgDown - on 10 seconds ago

Links WWW Browser Keys(buttons).
-----------
[dream] -> Links menu,
arrows -> up/down(urls),
left-right -> back/forward,
[ok] -> Enter,
[help] -> page down,
[mute] -> page up,
colors buttons -> mouse moving,
[vol+] -> mouse click,
[!Lame/EXIT] -> exit,
[vol-] -> backspace

LGames Keys(buttons).
-----------
[help] - quick help
[!Lame/EXIT] -> exit
[red] - yes
[blue] - no
[mute] -pause
[vol-+]/[bouquet-+] - flight under 45 degrees (Kobo Deluxe)

Channels logo.
-----------
Picture types - JPG and GIF.
The recommended size - 52 x 39 points.
The storage directory of files -/var/share/icons/logo/.
File with a logo the name from values of three parameters is given.

/ts id/on id/s id/.gif

TS id = "042a" on = "0001" frq = "11739000" inv = "2" sr = "27500000" fec = "3" pol = "1"
S i = "6ff8" n = " MTV Hits. [19E] " v = "be1" a = "be2" p = "be1" pmt = "151" tx = "0" t = "1"/

Accordingly the file for the channel " MTV Hits. [19E] " should have the following name.

42a00016fee.gif

EPG Cash.
-----------
Settings->Misc settings->-------Epg settings-------
Be carefull with "Dir for epg cash"!!!
There is must be freespace on hdd or your mount-partion/directory named as /hdd/, /mnt/, /media/, /tmp/.
Example: /hdd/epg, /mnt/your_dir/epg, /media/your_dir .

Acoustics spectrum lcd-analyzer
-----------
For audioplayer play-mode.
Main-menu->settings->audioplayer->lcd a-spectrum - no/yes

Live-veiw from dreambox-web.
-----------
Before to start Live-veiw from dreambox-web:
install VLC _http://downloads.videolan.org/pub/videolan/vlc/0.8.x/win32/vlc-0.8.x-win32.exe



Default cardserver and emu.
-----------
Newcs is default cardserver, mgcamd - emu.
**********************************************************************
Question: How to activate mgcamd and newcs?
ANSWER: Cardserver newcs mustbe to activate/restart at first!
ANSWER: Main Menu/Addons/Cardserver: no->newcs /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd /Restart camd
**********************************************************************
Question: How to install camd3 or @box?
ANSWER: camd3 mustbe to added /var/emu as - camd3, pcamd to /var/bin as pcamd, othere files to /var/keys
ANSWER: @box mustbe to added /var/emu as - @box or camdd, othere files to /var/keys
Question: How to activate camd3 or @box?
ANSWER: Cardserver newcs mustbe deactivate at first!
ANSWER: Main Menu/Addons/Cardserver: newcs->no /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd->...camd3 /Restart camd
ANSWER: Main Menu/Addons/Camd: no->mgcamd->...@box(or daemon) /Restart camd
**********************************************************************
Please, remember that
"Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!
See QuickStart.
You can start recording the crypt-channel and...
and zap to next crypt-channel and to look it or to zap next and next, etc.
JUST SWITCH EMU TO MGCAMD AND START YOU RECORD/VIEWING!
Mgcamd mustbe present in image inside.

PiP (a picture in a picture) on Neutrino/dm-7025
-----------
That PiP has earned in a mode of "record", before inclusion of boxing, it is necessary to make loop-connection.
Connect "output" of the first tuner on "input" of the second. Now it is possible to switch on box.

1. Call the list of channels - button " OK ".
2. Rise in the list on that channel which wish to observe in window PiP.
3. Press button " VIDEO ".
In the left top corner there will be a PiP-window with a picture of the chosen channel.

Simultaneously in an active mode it is possible to look channels only same tp!

Additional buttons of management.

Mode move/resize:
SHIFT+GREEN - movings and change the size of a PiP-picture,
SHIFT+YELLOW - movings and change the size of the basic tv-picture.

In this mode " big arrows " move, BOUQUET +/- changes the size, OK - to keep, LAME/EXIT - to skip.

Mode of viewing at PiP on mode:
" BOUQUET + " - zoom in/out for a PiP-window,
" BOUQUET - " - to switch off a PiP-window,
The little-arrow ">" - changes the basic (live) and PiP channels places.
If PiP is not included, pressing an little-arrow ">" - includes a PiP-window for the current channel.

Mode of viewing of records:
VIDEO - switches on and off a PiP-window of the channel on which were up to an entrance in a player of records;
OK - at viewing record call the list of channels, only if to this button other function is not set;
VIDEO - switches on and off a PiP-window of any channel from the list caused by pressing on "OK".

Mode of record of the channel.
Work same buttons as in a mode of viewing of channels.


VNCviewer.
-----------
You can access your handheld desktop simultaneously from dreambox
over a network connection. RealVNC (http: // _www.realvnc.com/) or
TightVNC (http: // _www.tightvnc.com/) can be used as a server.
You must create config file, /var/tuxbox/config/vnc.conf

server=10.0.0.2
port=5900
passwd=test
scale=1

10.0.0.2 IP of VNC server, 5900 port of server, test - password,
1 - size per screen

More info - _http://wiki.tuxbox.org/Plugins:VNCviewer



How to get updates and addons.
-----------
At first, dreambox must has internet-connection!
1. Main Menu, Service, Software Update, Updatemode: internet
2. search for new version...

How to install addons manual.
-----------
At first, our neutrino's addons is not same as enigma's addons!
1. Put addon-file(addon_name.bin) to /tmp
1. Main Menu, Service, Software Update, Updatemode: manual(ftp)
2. search for new version...
3. Filebrowser /tmp/, press to addon-file(addon_name.bin)
4. follow instruction

We have nothing against modifications to our Neutrino
images, if you follow our small conditions, namely:
1. The original Readme files must remain in archives with
your mod image.
The same counts to all readme and info files within the image.

How can you check who is original creator of the image?
There is information in file called ".version" in root
directory of every image.
Please, leave it also unchanged.

2. NO KEYS/RSA/ROM files within your renamed - modified image.
3. We are glad, NAME of our team(ruDbox) in file names of your
archives and mod image independently to see,
e.g. - ruDbox **** _mod_your_name or your_name_mod_ruDbox ***.

That's all.
Certainly you cannot follow our requirements and continue
everything like it is.
Believe, however, that attention of our friends who use
our private images is enough for us.

ruDbox Team
 

ggiuseppe

Registered User
Messages
1,728
CVS Emupack Manager 1.0rc3 DM7025

CVS Emupack Manager v1.0-rc3 DM7025
========================================
INSTALLATION:
========================================
Das Paket kann in folgende Pfade installiert werden:

: /usr/Timeport (Flash od. Multiboot Partition)
: /media/cf/Timeport (Compact Flash)
: /media/mbX/Timeport (Compact Flash)
: /media/usb/Timeport (USB-Stick)
: /media/hdd/Timeport (Harddisk)

------------------------------------
.WICHTIG !! Vor der Installation ...
------------------------------------
Achtet darauf, dass ihr genügend Platz im Flash habt, falls ihr dort das Paket installieren wollt.
Weiters, erstellt ein Timeport Directory dort wo ihr das Packet hinhaben wollt
oder es wird standartmäßig nach -> /usr/Timeport installiert.
Es darf aber nur ein Timeport Directory bei der In- und Deinstallieren existieren!!
Harddisk ist nicht zu empfehlen, da diese dann ständig läuft!

------------
.Per Telnet:
------------
.ipk ins /tmp kopieren...
cd /tmp
ipkg install enigma2-plugin-extensions-emupackmanager-cvs_1.0-r2_mipsel.ipk

---------------
.Per Multiboot:
---------------
.ipk ins MB_Images kopieren ...
und im Multiboot Menü unter: install options/ipk install


========================================
DER EMUPACK MANAGER BEINHALTET:
========================================

-------------------
.Extensions & CAMs:
-------------------
Fantastic v0.1.1-r0 by gutemine
CCcam Info v0.1 by AliAbdul
CCcam 1.6.2
Evocamd 2.14
MGcamd 1.19
Scam E2 23.03.06
NewCS 1.20
MP-Cardserver v0.8k-rc15

Beim Start wird automatisch das Emupack Manager Menu für Fantastic generiert.
In der /usr/Timeport/emustart könnt ihr euch das ansehen und auch erweitern.
Wenn ihr euch vertut könnt ihr mit der Rebuild Funktion die Standart Menus wieder herstellen.
Diese Dateien werden generiert:

main.cfg, config.cfg, enableipkg.cfg, extensionslist.cfg, colorbuttons.cfg, emumain.cfg, emustandart.cfg, cccam.cfg, evocamd.cfg, mgcamd.cfg, newcs.cfg, mpcs.cfg

========================================
CAM/EXTENSION/CONFIG/SCRIPT PFADE:
========================================


------------
.Extensions:
------------
/usr/Timeport/extensions/...


------
.CAMs:
------
/user/Timeport/emu/...
Die EMUs im Verzeichnis haben keine Endung,
und können somit einfach gegen neuere Versionen ersetzt werden.
in der .emuinfo habe ich die Versionen eingetragen.


-------------------------------------
.Configs für alle Cam`s & Cardserver:
-------------------------------------
/usr/Timeport/keys/... (Evocamd configs, Mgcamd configs, Keys)
/usr/Timeport/keys/cccam... (CCcam configs)
/usr/Timeport/keys/newcs... (NewCS config)
/usr/Timeport/keys/mpcs... (MPCS configs)
Hier sind alle Configs drin, Keys kommen natürlich auch da rein;-)


-------------------------------------------------------------------------------
.Einzelne CAM Startscripte, und ein zusätzliches AIO Startscript für alle CAMs:
-------------------------------------------------------------------------------
/user/Timeport/script/...
/user/Timeport/userscript/emustart.sh (AIO)


-----------
.LOG Files:
-----------
/usr/Timeport/log/...
Derzeit kommen nur LOG Files vom MP-Cardserver rein


------------
.Infoscript:
------------
/usr/Timeport/userscript/info.sh
Ein paar Exempels die natürlich erweitert und in verschiedenen Foren gepostet werden können.


========================================
Timeport Emupack Manager - Menu
========================================


---------------------
.Standart EMU - Menu:
---------------------
Im "Standart EMU - Menu" aktivierte EMUs werden beim Reboot wieder über die "emustart" getartet
und das ausgewählte CAM automatisch in der "emuconfig" eingertragen, dort können auch per Hand bis zu 3 Einträge gemacht werden.
Die "emustart" verwendet die Startscripte vom /usr/Timeport/script/ ... Verzeichnis.

Zum erweitern der CAMS im "Standart EMU - Menu", einfach das neue Startscript "emuname_start.sh" ins
/usr/Timeport/script/... legen, und das neue CAM ins
/usr/Timeport/emu/... Verzeichnis, diese werden dann nach einem Rebuild im "Standart EMU - Menu" angezeigt


---------------------
.Andere EMU - Menu`s:
---------------------
Bei den restlichen EMU Menüs werden die CAMS nicht über die "emustart" sondern über die "emustart.sh" im
/usr/Timeport/userscript Verzeichnis gestartet.


---------------------
.Unter Menus:
---------------------
Selbsterklärend ...


========================================
Timeport Emupack Config Menu:
========================================


---------------------------------------------
.Enable/Disable Shift & Colorbuttons Support
---------------------------------------------
Selbsterklärend ...


-------------------------------------
.Enable/Disable Timeport IPKG Server:
-------------------------------------
Stellt Pakete vom Timeport Server in Official/OoZooN/BoxMan Images zu verfügung.
Sollte mal ein Update kommen, kann dieses auch per Plugin Browser installiert werden.
Dazu muss vorher das entsprechende Image für das Server Update enabled werden.


----------------------------------
.List Extensions from IPKG Server:
----------------------------------
Listet alle Erweiterungen vom Timeport/Official/OoZooN/Boxman Server auf.


-------------
.IPKG Update:
-------------
Selbsterklärend ...


---------------------------------
.Install Timeport Emupack Update:
---------------------------------
Installiert ein Emupack Update vom Timeport Server.
Ist nicht ausreichend getestet, also verlasst euch nicht darauf das es funktioniert!


----------------------------
.Uninstall Timeport Emupack:
----------------------------
Selbsterklärend ...
Ist nicht ausreichend getestet, also verlasst euch nicht darauf das es funktioniert!


---------------------------------------
.Rebuild Timeport Emupack Manager Menu:
---------------------------------------
Generiert automatisch das Manager Menu für Fantastic.
Wenn ihr euch beim Menu basteln vertut, könnt ihr hier das Manager Menu wieder herstellen.



Installation getestet mit "Flash od. Multiboot Partition" und "Harddisk".

Ein besonders großes Danke an gutemine, der mich jederzeit mit Rat & Tat unterstützt hat!
Und danke auch an AliAbdul für die Erlaubnis sein CCcam Info Extensionen in meinem Paket integrieren zu dürfen.

Das Packet beinhaltet keine Keys oder Keyupdater und ist nur für CVS Images geeignet!

So, das wars - hoffe ich hab nichts vergessen;-)

Thanks to Time-X
 

aitchala

VIP
Messages
1,394
CVS for DM7025 from Schaedelmeister 31.03.07

CVS for DM7025 from Schaedelmeister 31.03.07

Code:
NOTE: build 200703311738: started

OE Build Configuration:
BB_VERSION     = "1.6.6"
OE_REVISION    = "299a5bba67fe8b549b69a516379c8da2651fedab"
TARGET_ARCH    = "mipsel"
TARGET_OS      = "linux"
MACHINE        = "dm7025"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"
 
Last edited:

Acech

Registered
Messages
678
digital-satfreaks-cvs-image-dm7025

digital-satfreaks-cvs-image-dm7025


OE Build Configuration:
BB_VERSION = "1.6.6"
OE_REVISION = "862a0b96abf5c1544885184468d642f9b8edf308"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm7025"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited:

aitchala

VIP
Messages
1,394
CVS for DM7025 from Schaedelmeister 20070501

NOTE: build 200705011303: started

OE Build Configuration:
BB_VERSION = "1.6.6"
OE_REVISION = "format_version "1"

new_manifest [0000000000000000000000000000000000000001]

old_revision [c920dc59c1d44a83e38a3c067357af93e27c8ab2]"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm7025"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited:
B

boxgot

Enigma v2.2 from 16-01-2008

Enigma v2.2 from 16-01-2008
#Frontprosessor-Versjon 7
#2SUB_ install whit Norwegian Subtitles

Available Download

#MView
#WebIf
#BarryAllen V4.4
#Orwell-v0.95
#EMU
# more is coming

Old attachment removed to preserve space
 
B

boxgot

Merlin_Reloaded_DM7025_30032008

Merlin_Reloaded_DM7025_30032008



Bei dem Image wurde Wert auf Schnelligkeit und Stabilität (Bitte bedenken, das es sich hier aber "nur" um ein Snapshot handelt) gelegt.

Es wurde bewusst darauf verzichetet, aufwändige Grafiken und "nice to haves" zu verbauen. Funktionalität stand und steht an erster Stelle.


Features:

* automount
* Dccamd handler (DreamCC. You have to place a functional script to "/usr/script/cam/" to activate the functions for dccamd)
* Merlin Browser (Browse your Dreambox in Filemode, Musicmode etc. File editor and Manipulator and much more. Switch between Listings with "Bouquet Up / Bouquet Down" Explore Options with "Menu" Key)
* Dreamfeeder (Downloadclient for our own addonserver, supports *.ipkg, *.tar.bz2, *.tar.gz)
* Merlin Racer Skin
* CVS from 30.03.2008
* picon puretext (save png´s as like the servicename calls)
* own addonserver
* and many more ....

This Image doesnt contain any emu software, or keys.

Nachladbar ist:
samba
sambaserver
nfsserver
viele plugins
picons für /media/cf
(und sehr vieles mehr )

Es werden dann fast täglich Updates auf den Addonserver gelegt (unter updates :) ) sodaß man enigma2 dann tagesaktuell halten kann. Sollten einzelne Module neu installiert werden müssen, so wird das bei Merlin-Project for Enigma-2 angekündigt.

Wir hoffen das Image gefällt euch schon jetzt und wir freuen uns über Rückmeldungen aller Art.

Old attachment removed to preserve space
 

marce

VIP
Messages
7,115
LoadEPG..

LoadEPG by Lastrico

The two novelties are:

1) in the menù configuration found the possibility of restartare Enigma after you/he/she has been uploadato the file street FTP. Does the option work if and only if the option FTP is also activated (if I don't send the file street FTP because I immediately would owe after restartare Enigma?).
LoadEPG effects a connection street Telnet (what therefore it has to be active on the DM7025), him logga with the username and password that you define in the configuration (generally "root" and your password) and the command is sent "killall enigma2". obviously The hostname is the same of the command FTP.
Assure not to have you recordings in progress


Nota1: if you want to use another I command to the place of "killall enigma2" it is enough that you edit the file LoadEPG.ini and in the section [Telnet] you manually insert the line:
Reset=[comando for the reset]
Then currently the default (it doesn't foresee in the. ini) it is:
Reset=killall enigma2


Nota2: in order to debug it is possible to visualize the traffic sent away telnet.
To activate him/it, always in LoadEPG.ini, you can manually add in the section [Telnet] the line:
Log=1


2) in the briefcase of LoadEPG 2.13 will find the file text LoadEPG.esc
This file (editabile simply with Notepad) it contains the list of the SIDs that you don't want that LoadEPG considers and therefore this allows to resolve the problem of the double channels with the same name. The SID you can simply infer him/it opening with WordPad the file lamedb, looking for the name of the channel: the line as soon as before the name of the channel it is the SID.


Here is an example:
in my file lamedb I am me two channels named as "La7" but in mine "favourites" I have solo one of the two. After some test I have identified that undesirable (it doesn't foresee in my Favouriteses) I have added him in LoadEPG.esc (a banal copia&incolla) and the game is made.


Thanks by Lastrico

Old attachment removed to preserve space
 
B

boxgot

EDG-Nemesis Perfect Flash plus v.1.1 for DM7025

EDG-Nemesis Perfect Flash plus v.1.1 for DM7025

Technical Infos:

* Enigma of: 16.05.2008
* New Driver: 30.04.2008
* Linux version 2.6.9
* GCC 4.1.1 Original CVS
* Kernel 2.6.12.6
* Busybox 1.0.1
* Tuxtxt 1.95
* for use in flash or MB (via CF,USB or HDD)
* Date image 17.05.2008

Features:

* SKYEpg 0.5b (include automatic downloader with crond...)
* Crond manager
* Tuxbox commander
* Camd Panel (with xxxmanager)
* xxxmanager for softcam and separated xxxxreader
* Cam predisposition
* Ecm info
* Advanced Info xxx
* Info advanced decoding
* Satellites.xml at 05.05.2008

No xxxs, No xxxs included

Regards:
- Nemesis
- Ronaldd
- Gutemine
- developpers and betatesters



=================================================

!!! ATTENZIONE - IMPORTANTE:
!!! QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' xxxLATORI, NE' INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
!!! EDG-NEMESIS NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

!!! WARNING - IMPORTANT DISCLAIMER:
!!! THIS FIRMWARE DOES NOT INCLUDE xxxS, NOR xxxLATORS, NOR URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
!!! EDG-NEMESIS IS NOT RESPONSIBLE IN ANY WAY FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.



Old attachment removed to preserve space
 
Last edited:
B

boxgot

alis-cvs-dm7025-20080727141723.nfi

alis-cvs-dm7025-20080727141723.nfi

OE frisch gebacken, neues CVS-Image erstellt. Zeit, mal wieder etwas mit euch zu teilen.

Treiber/Weiteres:
-Treiber: 03.06.2008
-Enigma2: 27.07.2008
-Plugins: 27.07.2008
-Ali's Plugins: 27.07.2008

Änderungen an Enigma2:
-autohide_pvrstate_dialog.patch
-autorefresh_pluginlist.patch
-enable_mhw_epg.patch
-show_only_available_languages.patch
-zaphistory.patch

Vorinstalliert:
-twisted-web
-twisted-mail
-python-pyopenssl
-python-email
-aio-screengrabber v0.6

Plugins:
-antiscrollbar
-autotimer
-cutlisteditor
-emailclient
-epgrefresh
-fritzcall
-graphmultiepg
-imdb
-logomanager
-mediaplayer
-movietagger
-netcaster
-ofdb
-pictureplayer
-simplerss
-vlcplayer
-webcamviewer
-webinterface
-rsdownloader
-scriptexecuter
-zaphistorybrowser
-passwordchanger
-mosaic
-commercialzapper

Old attachment removed to preserve space
 

k@lkov

Super VIP
Messages
10,003
alis-cvs-dm7025-20080816075431

Code:
drivers: 03.06.2008
enigma2: 16.06.2008
plugins: 16.06.2008

[B]functions in ali-image:[/B]
-BeyondDreamsSimpleCVS by vali as default skin
-start all found swap-files on bootup
-start automount on bootup looking for /etc/automount.conf
-start a daemon on bootup from /etc/daemon
-load all kernel-modules on bootup that are listed in the file /etc/kernel_modules
-some scripts
-yuvenabled
-multibouquet activated
-setup-level is set to expert

[B]patches:[/B]
-autohide_pvrstate_dialog.patch
-autorefresh_pluginlist.patch
-enable_mhw_epg.patch
-show_only_available_languages.patch
-zaphistory.patch

[B]system-plugins in ali-image:[/B]
-configurationbackup
-frontprocessorupgrade
-hotplug
-positionersetup
-satfinder
-skinselector
-softwareupdate
-videotune

[B]extensions in ali-image:[/B]
-aio-screengrabber
-commercialzapper
-cutlisteditor
-graphmultiepg
-mediaplayer
-mediascanner
-mosaic
-passwordchanger
-pictureplayer
-rsdownloader
-scriptexecuter
-webinterface
-zaphistorybrowser

Kleine Erläuterung zu softcams in diesem Image.
Eine manuelle Installation sollte nun einfach sein. Das Binary per ftp 
nach /usr/bin verfrachten, die Rechte dafür auf 755 setzen und den 
Namen des Bianries in /etc/daemon schreiben. Ein fertiges Päckchen 
ist im Anhang. Beim Bootup wird dieses mit gestartet. Ein Restart 
script ist ebenfalls im scriptexecuter plugin zu finden.

Old attachment removed to preserve space
 

k@lkov

Super VIP
Messages
10,003
Onestep-Image dm7025

Code:
Zum Jahresende freue ich mich euch das erste Onestep-Image zu präsentieren.

[B]Zum Image nur so viel:[/B]
-das Image bewegt sich nah an der OE Version von DMM
-die Cccam 2.0.11 ist im Image drin um euch die Nutzung von Abokarten zu ermöglichen
-Start der Cam funktioniert über das Benutzerskript(Erweiterungen oder Blue Button)
-Updates kommen vom experimentellen Zweig von DMM und vom Onestep Updateserver
-Erweiterung des Plugin Angebotes richtet sich auch nach euren Wünschen.
(NP und Keyupdater sind nicht erwünscht!)

Ich wünsche euch viel Spass mit den Images und würde mich über Feedback freuen.
 
Top