Firmware Openbox S9 HD

JAKITAKI

Super VIP
Messages
9,214
deep_c2ds2_cmt_1112130641

processing firmware is s10 of matching s9 13/12/2011
MENU is already open for s9
To get to the network settings you must enter the menu and remote control 4x6 then punish the Network Setup!
To get to
CCcam Client Setup-4x0
MG CAMD Setup Plug-4x0
Newcamd Server Setup-4x0
After turning off the remote control box on display shows off that does not go out and probably does not enter into standby for no LED is off or the clock instead of which I can not run. When you press the POWER button on the remote control appears on the display ON BOOT box and then starts up normally.
:):):)
 

JAKITAKI

Super VIP
Messages
9,214
HDS2_S9_by_anonymouSX

For Clone Openbox / Skybox S9

September version :) with Clone TimeBomb Disabled and some other fix .

Fixed by anonymouSX 5 jan 2012

fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed

i need your feedback so you know where i'm :)

AnonymouSX developer on forum.Ouedkniss.com

thanks to EliteForce helped me to understand cpu ali 3602

World First Firmware hacked for Openbox S9 ali 3602 .

all futur release on forum.Ouedkniss.com


Best Regards

AnonymouSX
 

HackTheNet

Registered
Messages
71
HDS2_Openbox_by_anonymouSX_V2_New_Red_GUI

HDS2_Openbox_by_anonymouSX_V2_New_Red_GUI

For Clone Openbox / Skybox S10 CCCAM SOftcam Mediaplayer Mkv AVI VOB ect.. support

New GUI menu Red Version with Clone TimeBomb Disabled and some other fix .

This Version Make the Original Openbox Firmware cheaper Welcome In 2012 .

Version AnonymouSX V2 FOR S9/S10/S11

Fixed by anonymouSX 02 feb 2011

fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed

AnonymouSX developer

thanks to EliteForce helped me to understand cpu ali 3602

Special thanks to my friend satsonne for this bitmap design

Thanks to my Beta Tester's mbtexascity and ipsgyn

You can support me i need some stuff for making new Firmware's .

Best Regards

With love AnonymouSX

Bilder:
img20120203002423.jpg

img20120203002438.jpg

img20120203002501.jpg

img20120203002534.jpg

AcWX0.jpg


Download: http://mir.cr/DTONB11Y
 

magictails

Registered
Messages
428
Openbox S9 software


DEEP_C2DS2_CMT_1112130641 (S10_S9) test

new style like blue color

MENU Open for s9
To get to the network settings you must enter the menu and remote control 4x6 then punish the Network Setup!
To get to
CCcam Client Setup-4x0
MG CAMD Setup Plug-4x0
Newcamd Server Setup-4x0
After turning off the remote control box on display shows off that does not go out and probably does not enter into standby for no LED is off or the clock instead of which I can not run. When you press the POWER button on the remote control appears on the display ON BOOT box and then starts up normally.
 

bozomustafa_68

Registered
Messages
16,935
Skybox/Openbox/Solomend S9/S10/S11/S12


Code:
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
 

HackTheNet

Registered
Messages
71
Europe-S9_S10_S11_S12-20120801 AnonymouSX V2B: 0481

Europe-S9_S10_S11_S12-20120801 AnonymouSX V2B: 0481

problem with
TP_PROG.dbs when booting from flash. It is better to pour on the
toolom competence in ABS.

OR MY bakup

HDS2_DUMP_TELEKARTA_STANDART_85e_AnonymouSX

S9 3 days for normal flight. In no clone did not test.

gracias a AnonymouSX

Neue AnonymouSX Firmware hier:

http://www.sat-universe.com/showpost.php?p=943076&postcount=32
 
Top