How toConfigure Emp centurie S8/1PCP-W2 switch to use monoblock without power pass filter

amila4341

Registered
Messages
22
Hi
Emp centurie S8/1PCP-W2 switch
I have connect monoblock to 8×1 switch

My configuration for monoblock connect with power pass splitter
Output from power pass splitter is connected to 5 th and 6 th ports of DiseqC switch

Configuration Mode: Advanced
Satelitte: sat1
LNB: Lnb5
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats one

Configuration Mode: Advanced
Satelitte: sat2
LNB: Lnb6
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats one


if i remove power pass filter and connect monoblock to diseq switch it is not working give me right config please
 
Top