Method of Opening PowerVu Channels in Enigma2 Using Oscam

Youknowme02

Registered
Messages
245
My Octagon 4k when went to watch the UFC fight 95W I got sound but no video, the only way I could watch it was using vlc to my computer?

Anyone else have trouble viewing the UFC (UFC 216) fight using their Octagon 4k box?
 

cristo4

Registered
Messages
90
Which enigma2 receiver can play powervu channels without stream relay?
Mutant HD 51.
On Dreamboxes ( 520/525/820/7080/900 OE 2.2/2.5) there is a problem with Pvu. After watching a Pvu channel you cannot watch any other encrypted channel( apart from Pvu encryption). You get picture only after full reboot.
 
Last edited:

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Really? It sucks!
Can anyone else confirm this? Box reboot is always required?

Ive seen that complaint enough to know its true mate, not a emu fault as some first thought but a fault with OE2.2/2.5
 

fmoreira

Registered
Messages
249
Hi,

I have a dreambox900HD with a OpenAtv image. I have a oscamEmu working ok on Biss channel´s but i can not open Power Vu...

Probably i am making a basic mistake..

I have this changelog:

2017/10/19 19:08:35 49E426DF c (ecm) linuxsatsupport (0E00@000000/0000/0001/40:9580DA598087FA499D4FC3C715C71FB1): rejected group (1 ms) - Sports (no matching reader)
2017/10/19 19:08:35 49E426DF c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2017/10/19 19:08:35 49E426DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1389 VPID 0488
2017/10/19 19:08:36 49E426DF c (ecm) linuxsatsupport (0E00@000000/0000/0001/40:012D4A516830C7507DFEC76FE69BAC6A): rejected group (1 ms) - Sports (no matching reader)
2017/10/19 19:08:37 49E426DF c (ecm) linuxsatsupport (0E00@000000/0000/0001/40:D5AD70F6B8EE506F38E091313C2A855F): rejected group (1 ms) - Sports (no matching reader)




And my configurations are:

Oscam.conf

[global]
serverip = 192.168.1.155
logfile = stdout
disablelog = 1
fallbacktimeout = 1500
clientmaxidle = 300
failbantime = 60
failbancount = 2
nice = -10
maxlogsize = 1000
waitforcards = 0
readerrestartseconds = 180
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_savepath = /usr/keys/oscam.stat
resolvegethostbyname = 1


[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

boxtype = dreambox

#[global]
#logfile = stdout
#waitforcards = 0


[cccam]
port = 8989
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 1





[webif]
httpport = 16002
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0



[streamrelay]
stream_relay_enabled = 0





OScam server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E1



Oscam.user

[account]
user = linuxsatsupport
group = 1
au = 1


Appreciate some help, please!!
 

fmoreira

Registered
Messages
249
extended_cw_api = 1-OE2.2

Thanks!!

But still the same:

2017/10/19 21:34:33 68DCC0DA c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/10/19 21:34:33 68DCC0DA c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1389 VPID 0488
2017/10/19 21:34:34 68DCC0DA c (ecm) linuxsatsupport (0E00@000000/0000/0001/40:672AC5B4F3D23D47617E3D10D67FC52B): rejected group (0 ms) - Sports (no matching reader)
2017/10/19 21:34:35 68DCC0DA c (ecm) linuxsatsupport (0E00@000000/0000/0001/40:F6584D0B6B3AEF6B4AEDD44D0AEB93D2): rejected group (1 ms) - Sports (no matching reader)
 

Prvt_N00b

Registered
Messages
44
The README has been updated.

PowerVU config
==============

Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677

AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677

For PowerVU the Stream Relay must be used:

IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.

For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize

If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.

When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")

Where do you get the servid for the softcam.key

P <srvid> <nb> <key>???
 

Rickk

Registered
Messages
2,375
yes, all dreams works without streamrelay
but dreamboxen from oe2.2 have problems with the channel change from pv to standard
 
Last edited:
Top