Ncam Emu compiled and patched by READ

  • Thread starter ooOO_SORGOS_OOoo
  • Start date
O

ooOO_SORGOS_OOoo

I dont try

PHP:
05-12-2016:

New Ncam1.2 Compiled by marouan:

VIACCESS:

 Entitle providers present on card that dont have any classes
 Some code cosmetics 
    
 Fix regression introduced (fake class 0 on provider with valid classes)

28-11-2016:

New Ncam1.1 Compiled by marouan:

Tandberg -ecm-emm fix

fix for new tandberg algo:
-ECM_TAG_CW_DESCRIPTOR: add new tag 0xED
-EMM_TAG_SECURITY_TABLE_DESCRIPTOR E4: add new mode 0x01
-EMM_TAG_EVENT_ENTITLEMENT_DESCRIPTOR E1: add new mode 0x01


add validity check for new ECM keys

ECM keys have last byte equal to 0x00, so do a quick check before new keys are written to softcam file to keep it clean from invalid keys. Invalid keys with last byte 0x00 can still be written though.

build-mips(Gigablue-Dream-VU+-Xtrend-Formuler.....):

http://www.mediafire.com/file/gphchb1akbv4z32/build-mips%28Gigablue-Dream-VU_-Xtrend-Formuler.....%29%282%29.rar

build-mips(Tiviar plus and similar):

http://www.mediafire.com/file/kktki8sifj9l1rz/build-mips%28Tiviar_plus_and_similar%29.rar

build-mips-router(Routers Mipsel DD-WRT):

http://www.mediafire.com/file/48c3st3c44kml71/build-mips-router%28Routers_Mipsel_DD-WRT%29.rar

build-sh4(Golden Media-Galaxy innovations-Amiko....):

http://www.mediafire.com/file/3n7i88h71u02t14/build-sh4%28Golden_Media-Galaxy_innovations-Amiko....%29.rar

build-x86-Linux-pc(32bit-i686):

http://www.mediafire.com/file/aeo03su3i3fwfr0/build-x86-Linux-pc%2832bit-i686%29.rar
 

marouan

Registered
Messages
96
Ncam1.3 Compiled For All

PHP:
13-12-2016:

New Ncam1.3 Compiled by marouan:

-DVBAPI:
Don't break on max streampids reached, just don't add any more!

-DVBAPI:
Add overflow protection to ECM and EMM pids!

-Restore class option for viaccess card in webif

-Fix: VU+ boxes zapping around

-Fix:
after disable a working gbox reader oscam crash complete 

-Fix for local card with caprovid 00000000. Happens when Ncam is patched with emu
Add log/msg for peer on-offline, authentication and connection lost
Add OSD notification for incoming GSMS
OSD feature enabled by suitable 'msg.osd' in tmp_dir
Add and update some debug log outputs


build-mips(Gigablue-Dream-VU+-Xtrend-Formuler.....):

http://www.mediafire.com/file/5mcwd7jt03m5sbe/build-mips%28Gigablue-Dream-VU_-Xtrend-Formuler.....%29%283%29.rar

build-mips(Tiviar plus and similar):

http://www.mediafire.com/file/kktki8sifj9l1rz/build-mips%28Tiviar_plus_and_similar%29.rar

build-mips-router(Routers Mipsel DD-WRT):

http://www.mediafire.com/file/48c3st3c44kml71/build-mips-router%28Routers_Mipsel_DD-WRT%29.rar

build-sh4(Golden Media-Galaxy innovations-Amiko....):

http://www.mediafire.com/file/3n7i88h71u02t14/build-sh4%28Golden_Media-Galaxy_innovations-Amiko....%29.rar

build-x86-Linux-pc(32bit-i686):

http://www.mediafire.com/file/aeo03su3i3fwfr0/build-x86-Linux-pc%2832bit-i686%29.rar
 

marouan

Registered
Messages
96
Ncam1.4 Fix Csat compiled for ALL

PHP:
28-12-2016:

New Ncam1.4 Compiled by marouan:

ADD Patch disablecrccws per Caid thanks to yoyodebug
example: for Csat
Add this Line for ncam.server
disablecrccws_only_for        = 0500:032830

ncam.server

[reader]
label                         = server1
enable                        = 1
protocol                      = cccam
device                        = host,port
user                          = user
password                      = password
group                         = 1
cccversion                    = 2.0.11
disablecrccws_only_for        = 0500:032830
cccmaxhops                    = 2
ccckeepalive                  = 1
audisabled                    = 1

[gbx]
fix for local card change (card detected/ ejected) not reported to peers
Change two defaults to more reasonable values

-Webif
-Correct cooldown parameter in webif
-Improve the Webif configuration screen.
-Add httpreadonly as a parameter in the webif
-Make all config parameters for the webif clickable to point to the Wiki
-Small reorganization of the parameters that display additional infos in the Status screen to place then in the same order as they are displayed when we enable them.

[gbx]
add feature
block ecm from specific peer(s)
ignore specific peer(s) entirely
fix Warning ref. cs_readlock timeout
code clean up and cosmetics
[DOC]
add optional parameter to Ncam.conf [gbox]:
block_ecm = peer_id[,peer_id...]
ignore_peer = peer_id[,peer_id...]

build-mips(Gigablue-Dream-VU+-Xtrend-Formuler.....):

http://www.mediafire.com/file/19xcki4534rjk8j/build-mips%28Gigablue-Dream-VU_-Xtrend-Formuler.....%29%284%29.rar

build-mips(Tiviar plus and similar):

http://www.mediafire.com/file/kktki8sifj9l1rz/build-mips%28Tiviar_plus_and_similar%29.rar

build-sh4(Golden Media-Galaxy innovations-Amiko....):

http://www.mediafire.com/file/3n7i88h71u02t14/build-sh4%28Golden_Media-Galaxy_innovations-Amiko....%29.rar

build-x86-Linux-pc(32bit-i686):

http://www.mediafire.com/file/aeo03su3i3fwfr0/build-x86-Linux-pc%2832bit-i686%29.rar

build-mips-router(Routers Mipsel DD-WRT):

http://www.mediafire.com/file/48c3st3c44kml71/build-mips-router%28Routers_Mipsel_DD-WRT%29.rar
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
Ncam1.6 compiled and patched by marouan

21-03-2017
accept all providers when provider is not specified:
This commit fixes the problem when a CAID is set in reader settings,
but the provider is set to zeroes (000000).
Without the patch, a "reader not found" was returned

Fix *** CWs are dropped when connected to real CCCam servers

fix half cw from mcs

the official Ncam V1.2 r3 doesn't support Constant.cw
you can test this file for ENTV Algerie 7°west and 5°west.

constant

by using this Reader:

[reader]
label = myconstantcw
protocol = constcw
device = /usr/keys/constant.cw
group = 10

02-03-2017

New Ncam1.5 Compiled by marouan:

New Fix for constcw module

28-12-2016:

New Ncam1.4 Compiled by marouan:

ADD Patch disablecrccws per Caid
example: for Csat
Add this Line for ncam.server
disablecrccws_only_for = 0500:032830

ncam.server

[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = password
group = 1
cccversion = 2.0.11
disablecrccws_only_for = 0500:032830
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1

[gbx]
fix for local card change (card detected/ ejected) not reported to peers
Change two defaults to more reasonable values

-Webif
-Correct cooldown parameter in webif
-Improve the Webif configuration screen.
-Add httpreadonly as a parameter in the webif
-Make all config parameters for the webif clickable to point to the Wiki
-Small reorganization of the parameters that display additional infos in the Status screen

to place then in the same order as they are displayed when we enable them.

[gbx]
add feature
block ecm from specific peer(s)
ignore specific peer(s) entirely
fix Warning ref. cs_readlock timeout
code clean up and cosmetics
[DOC]
add optional parameter to ncam.conf [gbox]:
block_ecm = peer_id[,peer_id...]
ignore_peer = peer_id[,peer_id...]
 

lion neptune

Registered
Messages
16
Ncam1.6 compiled and patched for all images

Ncam1.6 compiled and patched for all images


What’s news:

fix telesat and canal+ french
support constant file

21-03-2017

accept all providers when provider is not specified:
This commit fixes the problem when a CAID is set in reader settings,
but the provider is set to zeroes (000000).
Without the patch, a "reader not found" was returned

Fix *** CWs are dropped when connected to real CCCam servers

fix half cw from mcs

the official Ncam V1.2 r3 doesn't support Constant.cw

02-03-2017

New Ncam1.5 Compiled by marouan:

New Fix for constcw module

28-12-2016:

New Ncam1.4 Compiled by marouan:

ADD Patch disablecrccws per Caid
example: for Csat
Add this Line for ncam.server
disablecrccws_only_for = 0500:032830

ncam.server

[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = password
group = 1
cccversion = 2.0.11
disablecrccws_only_for = 0500:032830
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1

[gbx]
fix for local card change (card detected/ ejected) not reported to peers
Change two defaults to more reasonable values

-Webif
-Correct cooldown parameter in webif
-Improve the Webif configuration screen.
-Add httpreadonly as a parameter in the webif
-Make all config parameters for the webif clickable to point to the Wiki
-Small reorganization of the parameters that display additional infos in the Status screen

to place then in the same order as they are displayed when we enable them.

[gbx]
add feature
block ecm from specific peer(s)
ignore specific peer(s) entirely
fix Warning ref. cs_readlock timeout
code clean up and cosmetics
[DOC]
add optional parameter to ncam.conf [gbox]:
block_ecm = peer_id[,peer_id...]
ignore_peer = peer_id[,peer_id...]









Download the ipk package and, put this in commande with telnet:
opkg install -force-overwrite /tmp/*.ipk

https://1fichier.com/?zbtbaqe9mj[/COLOR]​



Please download this file or the last in the net++++++ and put it in:
/usr/keys/constant.cw
http://www.mediafire.com/file/n9fboy83bbe8v93/constant.rar







Please note this in ncam.server, which you find in etc/config:
ncam.server

[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = password
group = 1
cccversion = 2.0.11
disablecrccws_only_for = 0500:032830
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1

[reader]
label = myconstantcw
protocol = constcw
device = /usr/keys/constant.cw
group = 10







For each image, Please note that bin file is in:

BlackHole + DDDemon + DreamElite + EGAMI + ItalySat + ruDREAM + VTI + OpenLD
LT + newigma2 + OpenATV + OpenDroid + + GP3-Gemini + OpenPLI + OpenSPA + PeterPan
= /usr/bin

**********

TSimage + OpenTS + TDW + S.W.E + Merlin3 + PBnigma
= /usr/bin/cam

**********

PKT + HDMU
= /usr/emu

**********

OoZooN
= /usr/camd

**********
OpenVIX
= /usr/softcam


Thanks for Marouan








 
Last edited:

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam1.7 compiled and patched by marouan & RAED

V 1.7
- Add powervu to caids 0E00 and 0EFF
- Add tandberg to caids 10FF 1000
 
Last edited:

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam V1.7-r3 compiled for all images


-Add powervu to caids 0E00 and 0EFF
- Add tandberg to caids 10FF 1000
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam 1.7 sh4 for Spark

Ncam 1.7 sh4 patched for Spark box

Auto reading powervu and Tenberg with softcam.key plugin/var/keys=softcam.keys
Attribute:755
PowerVU to caids 0E00 and 0EFF
Tandberg to caids 10FF 1000
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam V1.7-r5 compiled for all images


-add powervu and tandberg

include all scripts files for almost images
Just download it and send to /tmp then install it.
It will be auto detect image and install correct _files for image.

Command to install in telnet
opkg install /tmp/*.ipk
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam1.8 sh4 New Fix compiled and patched by marouan

-fix incorrect baudrate shown in log for under-/overclocked mouse/phoenix readers
-diff provided by JoJoR

317273378.png
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam 1.9 compiled and patched by marouan

-Updates for PowerVu Crypto-System
-Add Tandberg ECM/EMM checksum validation
-Add patch Nagra Layer 7

build-mips(Gigablue-Dream-VU+-Xtrend-Formuler.....)​
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
Ncam 1.9 compiled and patched by marouan

Update All ipk_deb_sh4 files

-Updates for PowerVu Crypto-System
-Add Tandberg ECM/EMM checksum validation
-Add patch Nagra Layer 7
 

Rickk

Registered
Messages
2,375
Ncam 2.0 by marouan
-Fix for PowerVu Crypto-System
-Add Tandberg ECM/EMM checksum validation
-Add patch Nagra Layer 7
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
NCcam 2.0_r1 ALL Images (arm,deb,mips)

Config and Softcams.key files is in this path
/etc/tuxbox/config
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
NCcam 2.2 Fix compiled and patched by marouan & RAED


Ncam V 2.2
09-10-2017
Search default key only for local ecm requests
Search default key only for local (dvbapi) ecm requests and not for
network (cs protocols) requests where in most cases ecmpid is 0.
************
emu 750 - Add Director (Tandberg) v6
- Support for NanoType "EC"
- Add "aes_cbc_encrypt" funtion to emu
- Unify Tandberg key calling funtions

-I have created one ipk file (include all scripts files for almost images)
-I have add powervu and tandberg
 
Last edited:

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
NCcam 2.3 Fix compiled and patched by marouan & RAED

Ncam V 2.3
10-10-2017
Add Powevu hash mode 3 support
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
NCcam 2.3 for Sh4 Spark

Add Powevu hash mode 3 support
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
NCcam 2.4 Fix compiled and patched by marouan & RAED

Ncam V 2.4
14-10-2017
-Print "key not found" message for BISS
-Cosmetic on BISS key printing
 
Top